/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once #include "../DGUSDisplayDef.h" enum DGUSLCD_Screens : uint8_t { DGUSLCD_SCREEN_BOOT = 0, DGUSLCD_SCREEN_MAIN = 1, DGUSLCD_SCREEN_STATUS = 1, DGUSLCD_SCREEN_STATUS2 = 1, DGUSLCD_SCREEN_TEMPERATURE = 10, DGUSLCD_SCREEN_PREHEAT = 18, DGUSLCD_SCREEN_POWER_LOSS = 100, DGUSLCD_SCREEN_MANUALMOVE = 192, DGUSLCD_SCREEN_UTILITY = 120, DGUSLCD_SCREEN_FILAMENT_HEATING = 146, DGUSLCD_SCREEN_FILAMENT_LOADING = 148, DGUSLCD_SCREEN_FILAMENT_UNLOADING = 158, DGUSLCD_SCREEN_MANUALEXTRUDE = 160, DGUSLCD_SCREEN_SDFILELIST = 71, DGUSLCD_SCREEN_SDPRINTMANIPULATION = 73, DGUSLCD_SCREEN_SDPRINTTUNE = 75, DGUSLCD_SCREEN_FLC_PREHEAT = 94, DGUSLCD_SCREEN_FLC_PRINTING = 96, DGUSLCD_SCREEN_STEPPERMM = 212, DGUSLCD_SCREEN_PID_E = 214, DGUSLCD_SCREEN_PID_BED = 218, DGUSLCD_SCREEN_Z_OFFSET = 222, DGUSLCD_SCREEN_INFOS = 36, DGUSLCD_SCREEN_CONFIRM = 240, DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version") DGUSLCD_SCREEN_WAITING = 251, DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen" DGUSLDC_SCREEN_UNUSED = 255 }; // Display Memory layout used (T5UID) // Except system variables this is arbitrary, just to organize stuff.... // 0x0000 .. 0x0FFF -- System variables and reserved by the display // 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version // 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action) // 0x3000 .. 0x4FFF -- Marlin Data to be displayed // 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused // As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight, // so that we can keep variables nicely together in the address space. // UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out. constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality. constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd. // Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup. constexpr uint16_t VP_MSGSTR1 = 0x1100; constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it... constexpr uint16_t VP_MSGSTR2 = 0x1140; constexpr uint8_t VP_MSGSTR2_LEN = 0x20; constexpr uint16_t VP_MSGSTR3 = 0x1180; constexpr uint8_t VP_MSGSTR3_LEN = 0x20; constexpr uint16_t VP_MSGSTR4 = 0x11C0; constexpr uint8_t VP_MSGSTR4_LEN = 0x20; // Screenchange request for screens that only make sense when printer is idle. // e.g movement is only allowed if printer is not printing. // Marlin must confirm by setting the screen manually. constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000; constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte. constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)= constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card. constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen. // Buttons on the SD-Card File listing. constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected. constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed) constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog) constexpr uint16_t VP_SD_Print_Setting = 0x2040; constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up // Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values // (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support) // A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us // the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm. constexpr uint16_t VP_MOVE_X = 0x2100; constexpr uint16_t VP_MOVE_Y = 0x2102; constexpr uint16_t VP_MOVE_Z = 0x2104; constexpr uint16_t VP_MOVE_E0 = 0x2110; constexpr uint16_t VP_MOVE_E1 = 0x2112; //constexpr uint16_t VP_MOVE_E2 = 0x2114; //constexpr uint16_t VP_MOVE_E3 = 0x2116; //constexpr uint16_t VP_MOVE_E4 = 0x2118; //constexpr uint16_t VP_MOVE_E5 = 0x211A; constexpr uint16_t VP_HOME_ALL = 0x2120; constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130; // Power loss recovery constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180; // Fan Control Buttons , switch between "off" and "on" constexpr uint16_t VP_FAN0_CONTROL = 0x2200; constexpr uint16_t VP_FAN1_CONTROL = 0x2202; constexpr uint16_t VP_FAN2_CONTROL = 0x2204; constexpr uint16_t VP_FAN3_CONTROL = 0x2206; // Heater Control Buttons , triged between "cool down" and "heat PLA" state constexpr uint16_t VP_E0_CONTROL = 0x2210; constexpr uint16_t VP_E1_CONTROL = 0x2212; //constexpr uint16_t VP_E2_CONTROL = 0x2214; //constexpr uint16_t VP_E3_CONTROL = 0x2216; //constexpr uint16_t VP_E4_CONTROL = 0x2218; //constexpr uint16_t VP_E5_CONTROL = 0x221A; constexpr uint16_t VP_BED_CONTROL = 0x221C; // Preheat constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220; constexpr uint16_t VP_E1_BED_PREHEAT = 0x2222; //constexpr uint16_t VP_E2_BED_PREHEAT = 0x2224; //constexpr uint16_t VP_E3_BED_PREHEAT = 0x2226; //constexpr uint16_t VP_E4_BED_PREHEAT = 0x2228; //constexpr uint16_t VP_E5_BED_PREHEAT = 0x222A; // Filament load and unload constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300; constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2302; // Settings store , reset constexpr uint16_t VP_SETTINGS = 0x2400; // PID autotune constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410; constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412; //constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414; //constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416; //constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418; //constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A; constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420; // Calibrate Z constexpr uint16_t VP_Z_CALIBRATE = 0x2430; // First layer cal constexpr uint16_t VP_Z_FIRST_LAYER_CAL = 0x2500; // Data: 0 - Cancel first layer cal progress, >0 filament type have loaded // Firmware version on the boot screen. constexpr uint16_t VP_MARLIN_VERSION = 0x3000; constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed. // Place for status messages. constexpr uint16_t VP_M117 = 0x3020; constexpr uint8_t VP_M117_LEN = 0x20; // Temperatures. constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer // reserved to support up to 6 Extruders: constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer //constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer //constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer //constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer //constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer //constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer //constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer //constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer //constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer //constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer //constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer // reserved for up to 6 Extruders: //constexpr uint16_t VP_Flowrate_E2 = 0x3094; //constexpr uint16_t VP_Flowrate_E3 = 0x3096; //constexpr uint16_t VP_Flowrate_E4 = 0x3098; //constexpr uint16_t VP_Flowrate_E5 = 0x309A; constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100) constexpr uint16_t VP_Fan1_Percentage = 0x3102; // 2 Byte Integer (0..100) constexpr uint16_t VP_Fan2_Percentage = 0x3104; // 2 Byte Integer (0..100) constexpr uint16_t VP_Fan3_Percentage = 0x3106; // 2 Byte Integer (0..100) constexpr uint16_t VP_Feedrate_Percentage = 0x3108; // 2 Byte Integer (0..100) // Actual Position constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy constexpr uint16_t VP_PrintProgress_Percentage = 0x3130; // 2 Byte Integer (0..100) constexpr uint16_t VP_PrintTime = 0x3140; constexpr uint16_t VP_PrintTime_LEN = 32; constexpr uint16_t VP_PrintAccTime = 0x3160; constexpr uint16_t VP_PrintAccTime_LEN = 32; constexpr uint16_t VP_PrintsTotal = 0x3180; constexpr uint16_t VP_PrintsTotal_LEN = 16; // SDCard File Listing constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries. constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there. constexpr uint16_t VP_SD_FileName0 = 0x3200; constexpr uint16_t VP_SD_FileName1 = 0x3220; constexpr uint16_t VP_SD_FileName2 = 0x3240; constexpr uint16_t VP_SD_FileName3 = 0x3260; constexpr uint16_t VP_SD_FileName4 = 0x3280; constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; // constexpr uint16_t VP_SD_Print_Filename = 0x32C0; // Fan status constexpr uint16_t VP_FAN0_STATUS = 0x3300; constexpr uint16_t VP_FAN1_STATUS = 0x3302; constexpr uint16_t VP_FAN2_STATUS = 0x3304; constexpr uint16_t VP_FAN3_STATUS = 0x3306; // Heater status constexpr uint16_t VP_E0_STATUS = 0x3310; constexpr uint16_t VP_E1_STATUS = 0x3312; //constexpr uint16_t VP_E2_STATUS = 0x3314; //constexpr uint16_t VP_E3_STATUS = 0x3316; //constexpr uint16_t VP_E4_STATUS = 0x3318; //constexpr uint16_t VP_E5_STATUS = 0x331A; constexpr uint16_t VP_BED_STATUS = 0x331C; constexpr uint16_t VP_MOVE_OPTION = 0x3400; // Step per mm constexpr uint16_t VP_X_STEP_PER_MM = 0x3600; // at the moment , 2 byte unsigned int , 0~1638.4 //constexpr uint16_t VP_X2_STEP_PER_MM = 0x3602; constexpr uint16_t VP_Y_STEP_PER_MM = 0x3604; //constexpr uint16_t VP_Y2_STEP_PER_MM = 0x3606; constexpr uint16_t VP_Z_STEP_PER_MM = 0x3608; //constexpr uint16_t VP_Z2_STEP_PER_MM = 0x360A; constexpr uint16_t VP_E0_STEP_PER_MM = 0x3610; constexpr uint16_t VP_E1_STEP_PER_MM = 0x3612; //constexpr uint16_t VP_E2_STEP_PER_MM = 0x3614; //constexpr uint16_t VP_E3_STEP_PER_MM = 0x3616; //constexpr uint16_t VP_E4_STEP_PER_MM = 0x3618; //constexpr uint16_t VP_E5_STEP_PER_MM = 0x361A; // PIDs constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4 constexpr uint16_t VP_E0_PID_I = 0x3702; constexpr uint16_t VP_E0_PID_D = 0x3704; constexpr uint16_t VP_E1_PID_P = 0x3706; // at the moment , 2 byte unsigned int , 0~1638.4 constexpr uint16_t VP_E1_PID_I = 0x3708; constexpr uint16_t VP_E1_PID_D = 0x370A; constexpr uint16_t VP_BED_PID_P = 0x3710; constexpr uint16_t VP_BED_PID_I = 0x3712; constexpr uint16_t VP_BED_PID_D = 0x3714; // Wating screen status constexpr uint16_t VP_WAITING_STATUS = 0x3800; // SPs for certain variables... // located at 0x5000 and up // Not used yet! // This can be used e.g to make controls / data display invisible constexpr uint16_t SP_T_E0_Is = 0x5000; constexpr uint16_t SP_T_E0_Set = 0x5010; constexpr uint16_t SP_T_E1_Is = 0x5020; constexpr uint16_t SP_T_Bed_Is = 0x5030; constexpr uint16_t SP_T_Bed_Set = 0x5040;