/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * Geeetech GT2560 Revision A board pin assignments, based on the work of
 * George Robles (https://georges3dprinters.com) and
 * Richard Smith <galorin@gmail.com>
 */

#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif

#ifndef BOARD_INFO_NAME
  #define BOARD_INFO_NAME "GT2560 Rev.A"
#endif
#define DEFAULT_MACHINE_NAME "Prusa i3 Pro B"

//
// Limit Switches
//
#define X_MIN_PIN                             22
#define X_MAX_PIN                             24
#define Y_MIN_PIN                             26
#define Y_MAX_PIN                             28
#define Z_MIN_PIN                             30

#if ENABLED(BLTOUCH)
  #if MB(GT2560_REV_A_PLUS)
    #define SERVO0_PIN                        11
  #else
    #define SERVO0_PIN                        32
  #endif
  #define Z_MAX_PIN                           -1
#else
  #define Z_MAX_PIN                           32
#endif

//
// Steppers
//
#define X_STEP_PIN                            25
#define X_DIR_PIN                             23
#define X_ENABLE_PIN                          27

#define Y_STEP_PIN                            31
#define Y_DIR_PIN                             33
#define Y_ENABLE_PIN                          29

#define Z_STEP_PIN                            37
#define Z_DIR_PIN                             39
#define Z_ENABLE_PIN                          35

#define E0_STEP_PIN                           43
#define E0_DIR_PIN                            45
#define E0_ENABLE_PIN                         41

#define E1_STEP_PIN                           49
#define E1_DIR_PIN                            47
#define E1_ENABLE_PIN                         48

//
// Temperature Sensors
//
#define TEMP_0_PIN                             8
#define TEMP_1_PIN                             9
#define TEMP_BED_PIN                          10

//
// Heaters / Fans
//
#define HEATER_0_PIN                           2
#define HEATER_1_PIN                           3
#define HEATER_BED_PIN                         4
#ifndef FAN_PIN
  #define FAN_PIN                              7
#endif

//
// Misc. Functions
//
#define SDSS                                  53
#define LED_PIN                               13
#define PS_ON_PIN                             12
#define SUICIDE_PIN                           54  // Must be enabled at startup to keep power flowing
#define KILL_PIN                              -1

#if HAS_WIRED_LCD

  #define BEEPER_PIN                          18

  #if IS_NEWPANEL

    #if ENABLED(MKS_MINI_12864)
      #define DOGLCD_A0                        5
      #define DOGLCD_CS                       21
      #define BTN_EN1                         40
      #define BTN_EN2                         42
    #elif ENABLED(FYSETC_MINI_12864)
      // Disconnect EXP2-1 and EXP2-2, otherwise future firmware upload won't work.
      #define DOGLCD_A0                       20
      #define DOGLCD_CS                       17

      #define NEOPIXEL_PIN                    21
      #define BTN_EN1                         42
      #define BTN_EN2                         40

      #define LCD_RESET_PIN                   16

      #define DEFAULT_LCD_CONTRAST           220

      #define LCD_BACKLIGHT_PIN               -1
    #else
      #define LCD_PINS_RS                     20
      #define LCD_PINS_ENABLE                 17
      #define LCD_PINS_D4                     16
      #define LCD_PINS_D5                     21
      #define LCD_PINS_D6                      5
      #define LCD_PINS_D7                      6
      #define BTN_EN1                         42
      #define BTN_EN2                         40
    #endif

    #define BTN_ENC                           19
    #define SD_DETECT_PIN                     38

  #else                                           // !IS_NEWPANEL

    #define SHIFT_CLK_PIN                     38
    #define SHIFT_LD_PIN                      42
    #define SHIFT_OUT_PIN                     40
    #define SHIFT_EN_PIN                      17

    #define LCD_PINS_RS                       16
    #define LCD_PINS_ENABLE                    5
    #define LCD_PINS_D4                        6
    #define LCD_PINS_D5                       21
    #define LCD_PINS_D6                       20
    #define LCD_PINS_D7                       19

    #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
      #define BTN_ENC_EN             LCD_PINS_D7  // Detect the presence of the encoder
    #endif

    #define SD_DETECT_PIN                     -1

  #endif // !IS_NEWPANEL

#endif // HAS_WIRED_LCD