/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

#if NOT_TARGET(__STM32F1__)
  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif

/**
 * 21017 Victor Perez Marlin for stm32f1 test
 */

#define BOARD_INFO_NAME      "STM3R Mini"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME

// Enable I2C_EEPROM for testing
#define I2C_EEPROM

// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD    2000

//
// Limit Switches
//
#define X_STOP_PIN                          PD0
#define Y_STOP_PIN                          PD1
#define Z_STOP_PIN                          PD4

//
// Steppers
//
#define X_STEP_PIN                          PE1
#define X_DIR_PIN                           PE0
#define X_ENABLE_PIN                        PC0

#define Y_STEP_PIN                          PE3
#define Y_DIR_PIN                           PE2
#define Y_ENABLE_PIN                        PC1

#define Z_STEP_PIN                          PE5
#define Z_DIR_PIN                           PE4
#define Z_ENABLE_PIN                        PC2

#define E0_STEP_PIN                         PE7
#define E0_DIR_PIN                          PE6
#define E0_ENABLE_PIN                       PC3

#define E1_STEP_PIN                         PE9
#define E1_DIR_PIN                          PE8
#define E1_ENABLE_PIN                       PC4

#define E2_STEP_PIN                         PE11
#define E2_DIR_PIN                          PE10
#define E2_ENABLE_PIN                       PC5

//
// Misc. Functions
//
#define SDSS                                PA15
#define LED_PIN                             PB2

//
// Heaters / Fans
//
#define HEATER_0_PIN                        PD12  // EXTRUDER 1
//#define HEATER_1_PIN                      PD13

#define HEATER_BED_PIN                      PB9   // BED
//#define HEATER_BED2_PIN                   -1    // BED2
//#define HEATER_BED3_PIN                   -1    // BED3

#ifndef FAN_PIN
  #define FAN_PIN                           PD14
#endif
#define FAN1_PIN                            PD13

#define FAN_SOFT_PWM

//
// Temperature Sensors
//
#define TEMP_BED_PIN                        PA0
#define TEMP_0_PIN                          PA1
#define TEMP_1_PIN                          PA2
#define TEMP_2_PIN                          PA3

// Laser control
#if HAS_CUTTER
  #define SPINDLE_LASER_PWM_PIN             PB8
  #define SPINDLE_LASER_ENA_PIN             PD5
#endif

//
// LCD Pins
//
#if HAS_WIRED_LCD

  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
    #error "REPRAPWORLD_GRAPHICAL_LCD is not supported."
  #else
    #define LCD_PINS_RS                     PB8
    #define LCD_PINS_ENABLE                 PD2
    #define LCD_PINS_D4                     PB12
    #define LCD_PINS_D5                     PB13
    #define LCD_PINS_D6                     PB14
    #define LCD_PINS_D7                     PB15
    #if !IS_NEWPANEL
      #error "Non-NEWPANEL LCD is not supported."
    #endif
  #endif

  #if NEED_TOUCH_PINS

    #define TOUCH_CS_PIN                    PB12  // SPI2_NSS
    #define TOUCH_SCK_PIN                   PB13
    #define TOUCH_MOSI_PIN                  PB14
    #define TOUCH_MISO_PIN                  PB15
    #define TOUCH_INT_PIN                   PC6   // (PenIRQ coming from ADS7843)

  #elif IS_NEWPANEL

    #if IS_RRD_SC
      #error "RRD Smart Controller is not supported."
    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
      #error "REPRAPWORLD_GRAPHICAL_LCD is not supported."
    #elif ENABLED(LCD_I2C_PANELOLU2)
      #error "LCD_I2C_PANELOLU2 is not supported."
    #elif ENABLED(LCD_I2C_VIKI)
      #error "LCD_I2C_VIKI is not supported."
    #elif ANY(VIKI2, miniVIKI)
      #error "VIKI2 / miniVIKI is not supported."
    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
      #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported."
    #elif ENABLED(MINIPANEL)
      #error "MINIPANEL is not supported."
    #else
      #error "Other generic NEWPANEL LCD is not supported."
    #endif

  #endif

#endif // HAS_WIRED_LCD