/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once #if NOT_TARGET(STM32F4, STM32F4xx) #error "Oops! Select an STM32F4 board in 'Tools > Board.'" #elif HOTENDS > 6 || E_STEPPERS > 6 #error "FLYF407ZG supports up to 6 hotends / E-steppers." #endif #define BOARD_INFO_NAME "FLYF407ZG" #define BOARD_WEBSITE_URL "github.com/FLYmaker/FLYF407ZG" #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME // Avoid conflict with fans and TIMER_TONE #define TEMP_TIMER 3 #define STEP_TIMER 5 // // EEPROM Emulation // #if NO_EEPROM_SELECTED #define FLASH_EEPROM_EMULATION //#define SRAM_EEPROM_EMULATION //#define I2C_EEPROM #endif #if ENABLED(FLASH_EEPROM_EMULATION) // Decrease delays and flash wear by spreading writes across // the 128kB sector allocated for EEPROM emulation. #define FLASH_EEPROM_LEVELING #elif ENABLED(I2C_EEPROM) #define MARLIN_EEPROM_SIZE 0x2000 // 8KB #endif #ifndef MARLIN_EEPROM_SIZE #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // // Servos // #define SERVO0_PIN PE11 // // Limit Switches // #define X_MIN_PIN PC3 #define X_MAX_PIN PC2 #define Y_MIN_PIN PF2 #define Y_MAX_PIN PF1 #define Z_MIN_PIN PF0 #define Z_MAX_PIN PC15 // // Z Probe (when not Z_MIN_PIN) // #define Z_MIN_PROBE_PIN PC14 // Z3_PIN // // Steppers // #define X_STEP_PIN PB9 #define X_DIR_PIN PE0 #define X_ENABLE_PIN PE1 #ifndef X_CS_PIN #define X_CS_PIN PG13 #endif #define Y_STEP_PIN PB8 #define Y_DIR_PIN PG11 #define Y_ENABLE_PIN PG12 #ifndef Y_CS_PIN #define Y_CS_PIN PG10 #endif #define Z_STEP_PIN PA8 #define Z_DIR_PIN PD6 #define Z_ENABLE_PIN PD7 #ifndef Z_CS_PIN #define Z_CS_PIN PD5 #endif #define E0_STEP_PIN PC7 #define E0_DIR_PIN PD3 #define E0_ENABLE_PIN PD4 #ifndef E0_CS_PIN #define E0_CS_PIN PD1 #endif #define E1_STEP_PIN PC6 #define E1_DIR_PIN PA15 #define E1_ENABLE_PIN PD0 #ifndef E1_CS_PIN #define E1_CS_PIN PA14 #endif #define E2_STEP_PIN PD15 #define E2_DIR_PIN PG7 #define E2_ENABLE_PIN PG8 #ifndef E2_CS_PIN #define E2_CS_PIN PG6 #endif #define E3_STEP_PIN PD14 #define E3_DIR_PIN PG4 #define E3_ENABLE_PIN PG5 #ifndef E3_CS_PIN #define E3_CS_PIN PG3 #endif #define E4_STEP_PIN PD13 #define E4_DIR_PIN PD11 #define E4_ENABLE_PIN PG2 #ifndef E4_CS_PIN #define E4_CS_PIN PD10 #endif #define E5_STEP_PIN PD12 #define E5_DIR_PIN PD8 #define E5_ENABLE_PIN PD9 #ifndef E5_CS_PIN #define E5_CS_PIN PB12 #endif // // Temperature Sensors // #define TEMP_0_PIN PA0 // Analog Input #define TEMP_1_PIN PC1 // Analog Input #define TEMP_2_PIN PC0 // Analog Input #define TEMP_3_PIN PF10 // Analog Input #define TEMP_4_PIN PF5 // Analog Input #define TEMP_5_PIN PF4 // Analog Input #define TEMP_BED_PIN PF3 // Analog Input // // Heaters / Fans // #define HEATER_0_PIN PF7 #define HEATER_1_PIN PF6 #define HEATER_2_PIN PE6 #define HEATER_3_PIN PE5 #define HEATER_4_PIN PE4 #define HEATER_5_PIN PE3 #define HEATER_BED_PIN PE2 #ifndef FAN_PIN #define FAN_PIN PF8 #endif #define FAN1_PIN PF9 #define FAN2_PIN PA2 #define FAN3_PIN PA1 #define FAN4_PIN PE13 #define FAN5_PIN PB11 // // Onboard SD support // #define SDIO_D0_PIN PC8 #define SDIO_D1_PIN PC9 //#define SD_CARD_DETECT_PIN PC13 #define SDIO_D2_PIN PC10 #define SDIO_D3_PIN PC11 #define SDIO_CK_PIN PC12 #define SDIO_CMD_PIN PD2 #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD #endif #if SD_CONNECTION_IS(ONBOARD) #define SDIO_SUPPORT // Use SDIO for onboard SD #ifndef SDIO_SUPPORT #define SOFTWARE_SPI // Use soft SPI for onboard SD #define SDSS SDIO_D3_PIN #define SD_SCK_PIN SDIO_CK_PIN #define SD_MISO_PIN SDIO_D0_PIN #define SD_MOSI_PIN SDIO_CMD_PIN #endif #elif SD_CONNECTION_IS(LCD) #define SD_SCK_PIN PB13 #define SD_MISO_PIN PB14 #define SD_MOSI_PIN PB15 #define SDSS PF11 #define SD_DETECT_PIN PB2 #endif // // Trinamic Software SPI // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI #define TMC_SW_MOSI PB15 #endif #ifndef TMC_SW_MISO #define TMC_SW_MISO PB14 #endif #ifndef TMC_SW_SCK #define TMC_SW_SCK PB13 #endif #endif // // Trinamic Software Serial // #if HAS_TMC_UART #define X_SERIAL_TX_PIN PG13 #define X_SERIAL_RX_PIN PG13 #define Y_SERIAL_TX_PIN PG10 #define Y_SERIAL_RX_PIN PG10 #define Z_SERIAL_TX_PIN PD5 #define Z_SERIAL_RX_PIN PD5 #define E0_SERIAL_TX_PIN PD1 #define E0_SERIAL_RX_PIN PD1 #define E1_SERIAL_TX_PIN PA14 #define E1_SERIAL_RX_PIN PA14 #define E2_SERIAL_TX_PIN PG6 #define E2_SERIAL_RX_PIN PG6 #define E3_SERIAL_TX_PIN PG3 #define E3_SERIAL_RX_PIN PG3 #define E4_SERIAL_TX_PIN PD10 #define E4_SERIAL_RX_PIN PD10 #define E5_SERIAL_TX_PIN PB12 #define E5_SERIAL_RX_PIN PB12 #endif // // LCD / Controller // #define BEEPER_PIN PB10 #define LCD_PINS_RS PE12 #define LCD_PINS_ENABLE PE14 #define LCD_PINS_D4 PE10 #define LCD_PINS_D5 PE9 #define LCD_PINS_D6 PE8 #define LCD_PINS_D7 PE7 #define BTN_EN1 PC4 #define BTN_EN2 PC5 #define BTN_ENC PE15 // // Filament runout // #define FIL_RUNOUT_PIN PA3 // // ST7920 Delays // #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif #ifndef BOARD_ST7920_DELAY_2 #define BOARD_ST7920_DELAY_2 DELAY_NS(48) #endif #ifndef BOARD_ST7920_DELAY_3 #define BOARD_ST7920_DELAY_3 DELAY_NS(715) #endif