From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/HAL/shared/HAL_ST7920.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Marlin/src/HAL/shared/HAL_ST7920.h (limited to 'Marlin/src/HAL/shared/HAL_ST7920.h') diff --git a/Marlin/src/HAL/shared/HAL_ST7920.h b/Marlin/src/HAL/shared/HAL_ST7920.h new file mode 100644 index 0000000..4e362f9 --- /dev/null +++ b/Marlin/src/HAL/shared/HAL_ST7920.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * HAL/ST7920.h + * For the HALs that provide direct access to the ST7920 display + * (bypassing U8G), it will allow the LIGHTWEIGHT_UI to operate. + */ + +#if BOTH(HAS_MARLINUI_U8GLIB, LIGHTWEIGHT_UI) + void ST7920_cs(); + void ST7920_ncs(); + void ST7920_set_cmd(); + void ST7920_set_dat(); + void ST7920_write_byte(const uint8_t data); +#endif -- cgit v1.2.3