Deleted vendor folder

1 files changed, 0 insertions, 1020 deletions

diff --git a/vendor/memchr/src/arch/wasm32/simd128/memchr.rs b/vendor/memchr/src/arch/wasm32/simd128/memchr.rs
deleted file mode 100644
index fa314c9..0000000
--- a/vendor/memchr/src/arch/wasm32/simd128/memchr.rs
+++ /dev/null
@@ -1,1020 +0,0 @@
-/*!
-This module defines 128-bit vector implementations of `memchr` and friends.
-
-The main types in this module are [`One`], [`Two`] and [`Three`]. They are for
-searching for one, two or three distinct bytes, respectively, in a haystack.
-Each type also has corresponding double ended iterators. These searchers are
-typically much faster than scalar routines accomplishing the same task.
-
-The `One` searcher also provides a [`One::count`] routine for efficiently
-counting the number of times a single byte occurs in a haystack. This is
-useful, for example, for counting the number of lines in a haystack. This
-routine exists because it is usually faster, especially with a high match
-count, then using [`One::find`] repeatedly. ([`OneIter`] specializes its
-`Iterator::count` implementation to use this routine.)
-
-Only one, two and three bytes are supported because three bytes is about
-the point where one sees diminishing returns. Beyond this point and it's
-probably (but not necessarily) better to just use a simple `[bool; 256]` array
-or similar. However, it depends mightily on the specific work-load and the
-expected match frequency.
-*/
-
-use core::arch::wasm32::v128;
-
-use crate::{arch::generic::memchr as generic, ext::Pointer, vector::Vector};
-
-/// Finds all occurrences of a single byte in a haystack.
-#[derive(Clone, Copy, Debug)]
-pub struct One(generic::One<v128>);
-
-impl One {
-    /// Create a new searcher that finds occurrences of the needle byte given.
-    ///
-    /// This particular searcher is specialized to use simd128 vector
-    /// instructions that typically make it quite fast.
-    ///
-    /// If simd128 is unavailable in the current environment, then `None` is
-    /// returned.
-    #[inline]
-    pub fn new(needle: u8) -> Option<One> {
-        if One::is_available() {
-            // SAFETY: we check that simd128 is available above.
-            unsafe { Some(One::new_unchecked(needle)) }
-        } else {
-            None
-        }
-    }
-
-    /// Create a new finder specific to simd128 vectors and routines without
-    /// checking that simd128 is available.
-    ///
-    /// # Safety
-    ///
-    /// Callers must guarantee that it is safe to execute `simd128`
-    /// instructions in the current environment.
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    pub unsafe fn new_unchecked(needle: u8) -> One {
-        One(generic::One::new(needle))
-    }
-
-    /// Returns true when this implementation is available in the current
-    /// environment.
-    ///
-    /// When this is true, it is guaranteed that [`One::new`] will return
-    /// a `Some` value. Similarly, when it is false, it is guaranteed that
-    /// `One::new` will return a `None` value.
-    ///
-    /// Note also that for the lifetime of a single program, if this returns
-    /// true then it will always return true.
-    #[inline]
-    pub fn is_available() -> bool {
-        #[cfg(target_feature = "simd128")]
-        {
-            true
-        }
-        #[cfg(not(target_feature = "simd128"))]
-        {
-            false
-        }
-    }
-
-    /// Return the first occurrence of one of the needle bytes in the given
-    /// haystack. If no such occurrence exists, then `None` is returned.
-    ///
-    /// The occurrence is reported as an offset into `haystack`. Its maximum
-    /// value is `haystack.len() - 1`.
-    #[inline]
-    pub fn find(&self, haystack: &[u8]) -> Option<usize> {
-        // SAFETY: `find_raw` guarantees that if a pointer is returned, it
-        // falls within the bounds of the start and end pointers.
-        unsafe {
-            generic::search_slice_with_raw(haystack, |s, e| {
-                self.find_raw(s, e)
-            })
-        }
-    }
-
-    /// Return the last occurrence of one of the needle bytes in the given
-    /// haystack. If no such occurrence exists, then `None` is returned.
-    ///
-    /// The occurrence is reported as an offset into `haystack`. Its maximum
-    /// value is `haystack.len() - 1`.
-    #[inline]
-    pub fn rfind(&self, haystack: &[u8]) -> Option<usize> {
-        // SAFETY: `rfind_raw` guarantees that if a pointer is returned, it
-        // falls within the bounds of the start and end pointers.
-        unsafe {
-            generic::search_slice_with_raw(haystack, |s, e| {
-                self.rfind_raw(s, e)
-            })
-        }
-    }
-
-    /// Counts all occurrences of this byte in the given haystack.
-    #[inline]
-    pub fn count(&self, haystack: &[u8]) -> usize {
-        // SAFETY: All of our pointers are derived directly from a borrowed
-        // slice, which is guaranteed to be valid.
-        unsafe {
-            let start = haystack.as_ptr();
-            let end = start.add(haystack.len());
-            self.count_raw(start, end)
-        }
-    }
-
-    /// Like `find`, but accepts and returns raw pointers.
-    ///
-    /// When a match is found, the pointer returned is guaranteed to be
-    /// `>= start` and `< end`.
-    ///
-    /// This routine is useful if you're already using raw pointers and would
-    /// like to avoid converting back to a slice before executing a search.
-    ///
-    /// # Safety
-    ///
-    /// * Both `start` and `end` must be valid for reads.
-    /// * Both `start` and `end` must point to an initialized value.
-    /// * Both `start` and `end` must point to the same allocated object and
-    /// must either be in bounds or at most one byte past the end of the
-    /// allocated object.
-    /// * Both `start` and `end` must be _derived from_ a pointer to the same
-    /// object.
-    /// * The distance between `start` and `end` must not overflow `isize`.
-    /// * The distance being in bounds must not rely on "wrapping around" the
-    /// address space.
-    ///
-    /// Note that callers may pass a pair of pointers such that `start >= end`.
-    /// In that case, `None` will always be returned.
-    #[inline]
-    pub unsafe fn find_raw(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        if start >= end {
-            return None;
-        }
-        if end.distance(start) < v128::BYTES {
-            // SAFETY: We require the caller to pass valid start/end pointers.
-            return generic::fwd_byte_by_byte(start, end, |b| {
-                b == self.0.needle1()
-            });
-        }
-        // SAFETY: Building a `One` means it's safe to call 'simd128' routines.
-        // Also, we've checked that our haystack is big enough to run on the
-        // vector routine. Pointer validity is caller's responsibility.
-        self.find_raw_impl(start, end)
-    }
-
-    /// Like `rfind`, but accepts and returns raw pointers.
-    ///
-    /// When a match is found, the pointer returned is guaranteed to be
-    /// `>= start` and `< end`.
-    ///
-    /// This routine is useful if you're already using raw pointers and would
-    /// like to avoid converting back to a slice before executing a search.
-    ///
-    /// # Safety
-    ///
-    /// * Both `start` and `end` must be valid for reads.
-    /// * Both `start` and `end` must point to an initialized value.
-    /// * Both `start` and `end` must point to the same allocated object and
-    /// must either be in bounds or at most one byte past the end of the
-    /// allocated object.
-    /// * Both `start` and `end` must be _derived from_ a pointer to the same
-    /// object.
-    /// * The distance between `start` and `end` must not overflow `isize`.
-    /// * The distance being in bounds must not rely on "wrapping around" the
-    /// address space.
-    ///
-    /// Note that callers may pass a pair of pointers such that `start >= end`.
-    /// In that case, `None` will always be returned.
-    #[inline]
-    pub unsafe fn rfind_raw(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        if start >= end {
-            return None;
-        }
-        if end.distance(start) < v128::BYTES {
-            // SAFETY: We require the caller to pass valid start/end pointers.
-            return generic::rev_byte_by_byte(start, end, |b| {
-                b == self.0.needle1()
-            });
-        }
-        // SAFETY: Building a `One` means it's safe to call 'simd128' routines.
-        // Also, we've checked that our haystack is big enough to run on the
-        // vector routine. Pointer validity is caller's responsibility.
-        self.rfind_raw_impl(start, end)
-    }
-
-    /// Counts all occurrences of this byte in the given haystack represented
-    /// by raw pointers.
-    ///
-    /// When a match is found, the pointer returned is guaranteed to be
-    /// `>= start` and `< end`.
-    ///
-    /// This routine is useful if you're already using raw pointers and would
-    /// like to avoid converting back to a slice before executing a search.
-    ///
-    /// # Safety
-    ///
-    /// * Both `start` and `end` must be valid for reads.
-    /// * Both `start` and `end` must point to an initialized value.
-    /// * Both `start` and `end` must point to the same allocated object and
-    /// must either be in bounds or at most one byte past the end of the
-    /// allocated object.
-    /// * Both `start` and `end` must be _derived from_ a pointer to the same
-    /// object.
-    /// * The distance between `start` and `end` must not overflow `isize`.
-    /// * The distance being in bounds must not rely on "wrapping around" the
-    /// address space.
-    ///
-    /// Note that callers may pass a pair of pointers such that `start >= end`.
-    /// In that case, `None` will always be returned.
-    #[inline]
-    pub unsafe fn count_raw(&self, start: *const u8, end: *const u8) -> usize {
-        if start >= end {
-            return 0;
-        }
-        if end.distance(start) < v128::BYTES {
-            // SAFETY: We require the caller to pass valid start/end pointers.
-            return generic::count_byte_by_byte(start, end, |b| {
-                b == self.0.needle1()
-            });
-        }
-        // SAFETY: Building a `One` means it's safe to call 'simd128' routines.
-        // Also, we've checked that our haystack is big enough to run on the
-        // vector routine. Pointer validity is caller's responsibility.
-        self.count_raw_impl(start, end)
-    }
-
-    /// Execute a search using simd128 vectors and routines.
-    ///
-    /// # Safety
-    ///
-    /// Same as [`One::find_raw`], except the distance between `start` and
-    /// `end` must be at least the size of a simd128 vector (in bytes).
-    ///
-    /// (The target feature safety obligation is automatically fulfilled by
-    /// virtue of being a method on `One`, which can only be constructed
-    /// when it is safe to call `simd128` routines.)
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    unsafe fn find_raw_impl(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        self.0.find_raw(start, end)
-    }
-
-    /// Execute a search using simd128 vectors and routines.
-    ///
-    /// # Safety
-    ///
-    /// Same as [`One::rfind_raw`], except the distance between `start` and
-    /// `end` must be at least the size of a simd128 vector (in bytes).
-    ///
-    /// (The target feature safety obligation is automatically fulfilled by
-    /// virtue of being a method on `One`, which can only be constructed
-    /// when it is safe to call `simd128` routines.)
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    unsafe fn rfind_raw_impl(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        self.0.rfind_raw(start, end)
-    }
-
-    /// Execute a count using simd128 vectors and routines.
-    ///
-    /// # Safety
-    ///
-    /// Same as [`One::count_raw`], except the distance between `start` and
-    /// `end` must be at least the size of a simd128 vector (in bytes).
-    ///
-    /// (The target feature safety obligation is automatically fulfilled by
-    /// virtue of being a method on `One`, which can only be constructed
-    /// when it is safe to call `simd128` routines.)
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    unsafe fn count_raw_impl(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> usize {
-        self.0.count_raw(start, end)
-    }
-
-    /// Returns an iterator over all occurrences of the needle byte in the
-    /// given haystack.
-    ///
-    /// The iterator returned implements `DoubleEndedIterator`. This means it
-    /// can also be used to find occurrences in reverse order.
-    #[inline]
-    pub fn iter<'a, 'h>(&'a self, haystack: &'h [u8]) -> OneIter<'a, 'h> {
-        OneIter { searcher: self, it: generic::Iter::new(haystack) }
-    }
-}
-
-/// An iterator over all occurrences of a single byte in a haystack.
-///
-/// This iterator implements `DoubleEndedIterator`, which means it can also be
-/// used to find occurrences in reverse order.
-///
-/// This iterator is created by the [`One::iter`] method.
-///
-/// The lifetime parameters are as follows:
-///
-/// * `'a` refers to the lifetime of the underlying [`One`] searcher.
-/// * `'h` refers to the lifetime of the haystack being searched.
-#[derive(Clone, Debug)]
-pub struct OneIter<'a, 'h> {
-    searcher: &'a One,
-    it: generic::Iter<'h>,
-}
-
-impl<'a, 'h> Iterator for OneIter<'a, 'h> {
-    type Item = usize;
-
-    #[inline]
-    fn next(&mut self) -> Option<usize> {
-        // SAFETY: We rely on the generic iterator to provide valid start
-        // and end pointers, but we guarantee that any pointer returned by
-        // 'find_raw' falls within the bounds of the start and end pointer.
-        unsafe { self.it.next(|s, e| self.searcher.find_raw(s, e)) }
-    }
-
-    #[inline]
-    fn count(self) -> usize {
-        self.it.count(|s, e| {
-            // SAFETY: We rely on our generic iterator to return valid start
-            // and end pointers.
-            unsafe { self.searcher.count_raw(s, e) }
-        })
-    }
-
-    #[inline]
-    fn size_hint(&self) -> (usize, Option<usize>) {
-        self.it.size_hint()
-    }
-}
-
-impl<'a, 'h> DoubleEndedIterator for OneIter<'a, 'h> {
-    #[inline]
-    fn next_back(&mut self) -> Option<usize> {
-        // SAFETY: We rely on the generic iterator to provide valid start
-        // and end pointers, but we guarantee that any pointer returned by
-        // 'rfind_raw' falls within the bounds of the start and end pointer.
-        unsafe { self.it.next_back(|s, e| self.searcher.rfind_raw(s, e)) }
-    }
-}
-
-impl<'a, 'h> core::iter::FusedIterator for OneIter<'a, 'h> {}
-
-/// Finds all occurrences of two bytes in a haystack.
-///
-/// That is, this reports matches of one of two possible bytes. For example,
-/// searching for `a` or `b` in `afoobar` would report matches at offsets `0`,
-/// `4` and `5`.
-#[derive(Clone, Copy, Debug)]
-pub struct Two(generic::Two<v128>);
-
-impl Two {
-    /// Create a new searcher that finds occurrences of the needle bytes given.
-    ///
-    /// This particular searcher is specialized to use simd128 vector
-    /// instructions that typically make it quite fast.
-    ///
-    /// If simd128 is unavailable in the current environment, then `None` is
-    /// returned.
-    #[inline]
-    pub fn new(needle1: u8, needle2: u8) -> Option<Two> {
-        if Two::is_available() {
-            // SAFETY: we check that simd128 is available above.
-            unsafe { Some(Two::new_unchecked(needle1, needle2)) }
-        } else {
-            None
-        }
-    }
-
-    /// Create a new finder specific to simd128 vectors and routines without
-    /// checking that simd128 is available.
-    ///
-    /// # Safety
-    ///
-    /// Callers must guarantee that it is safe to execute `simd128`
-    /// instructions in the current environment.
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    pub unsafe fn new_unchecked(needle1: u8, needle2: u8) -> Two {
-        Two(generic::Two::new(needle1, needle2))
-    }
-
-    /// Returns true when this implementation is available in the current
-    /// environment.
-    ///
-    /// When this is true, it is guaranteed that [`Two::new`] will return
-    /// a `Some` value. Similarly, when it is false, it is guaranteed that
-    /// `Two::new` will return a `None` value.
-    ///
-    /// Note also that for the lifetime of a single program, if this returns
-    /// true then it will always return true.
-    #[inline]
-    pub fn is_available() -> bool {
-        #[cfg(target_feature = "simd128")]
-        {
-            true
-        }
-        #[cfg(not(target_feature = "simd128"))]
-        {
-            false
-        }
-    }
-
-    /// Return the first occurrence of one of the needle bytes in the given
-    /// haystack. If no such occurrence exists, then `None` is returned.
-    ///
-    /// The occurrence is reported as an offset into `haystack`. Its maximum
-    /// value is `haystack.len() - 1`.
-    #[inline]
-    pub fn find(&self, haystack: &[u8]) -> Option<usize> {
-        // SAFETY: `find_raw` guarantees that if a pointer is returned, it
-        // falls within the bounds of the start and end pointers.
-        unsafe {
-            generic::search_slice_with_raw(haystack, |s, e| {
-                self.find_raw(s, e)
-            })
-        }
-    }
-
-    /// Return the last occurrence of one of the needle bytes in the given
-    /// haystack. If no such occurrence exists, then `None` is returned.
-    ///
-    /// The occurrence is reported as an offset into `haystack`. Its maximum
-    /// value is `haystack.len() - 1`.
-    #[inline]
-    pub fn rfind(&self, haystack: &[u8]) -> Option<usize> {
-        // SAFETY: `rfind_raw` guarantees that if a pointer is returned, it
-        // falls within the bounds of the start and end pointers.
-        unsafe {
-            generic::search_slice_with_raw(haystack, |s, e| {
-                self.rfind_raw(s, e)
-            })
-        }
-    }
-
-    /// Like `find`, but accepts and returns raw pointers.
-    ///
-    /// When a match is found, the pointer returned is guaranteed to be
-    /// `>= start` and `< end`.
-    ///
-    /// This routine is useful if you're already using raw pointers and would
-    /// like to avoid converting back to a slice before executing a search.
-    ///
-    /// # Safety
-    ///
-    /// * Both `start` and `end` must be valid for reads.
-    /// * Both `start` and `end` must point to an initialized value.
-    /// * Both `start` and `end` must point to the same allocated object and
-    /// must either be in bounds or at most one byte past the end of the
-    /// allocated object.
-    /// * Both `start` and `end` must be _derived from_ a pointer to the same
-    /// object.
-    /// * The distance between `start` and `end` must not overflow `isize`.
-    /// * The distance being in bounds must not rely on "wrapping around" the
-    /// address space.
-    ///
-    /// Note that callers may pass a pair of pointers such that `start >= end`.
-    /// In that case, `None` will always be returned.
-    #[inline]
-    pub unsafe fn find_raw(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        if start >= end {
-            return None;
-        }
-        if end.distance(start) < v128::BYTES {
-            // SAFETY: We require the caller to pass valid start/end pointers.
-            return generic::fwd_byte_by_byte(start, end, |b| {
-                b == self.0.needle1() || b == self.0.needle2()
-            });
-        }
-        // SAFETY: Building a `Two` means it's safe to call 'simd128' routines.
-        // Also, we've checked that our haystack is big enough to run on the
-        // vector routine. Pointer validity is caller's responsibility.
-        self.find_raw_impl(start, end)
-    }
-
-    /// Like `rfind`, but accepts and returns raw pointers.
-    ///
-    /// When a match is found, the pointer returned is guaranteed to be
-    /// `>= start` and `< end`.
-    ///
-    /// This routine is useful if you're already using raw pointers and would
-    /// like to avoid converting back to a slice before executing a search.
-    ///
-    /// # Safety
-    ///
-    /// * Both `start` and `end` must be valid for reads.
-    /// * Both `start` and `end` must point to an initialized value.
-    /// * Both `start` and `end` must point to the same allocated object and
-    /// must either be in bounds or at most one byte past the end of the
-    /// allocated object.
-    /// * Both `start` and `end` must be _derived from_ a pointer to the same
-    /// object.
-    /// * The distance between `start` and `end` must not overflow `isize`.
-    /// * The distance being in bounds must not rely on "wrapping around" the
-    /// address space.
-    ///
-    /// Note that callers may pass a pair of pointers such that `start >= end`.
-    /// In that case, `None` will always be returned.
-    #[inline]
-    pub unsafe fn rfind_raw(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        if start >= end {
-            return None;
-        }
-        if end.distance(start) < v128::BYTES {
-            // SAFETY: We require the caller to pass valid start/end pointers.
-            return generic::rev_byte_by_byte(start, end, |b| {
-                b == self.0.needle1() || b == self.0.needle2()
-            });
-        }
-        // SAFETY: Building a `Two` means it's safe to call 'simd128' routines.
-        // Also, we've checked that our haystack is big enough to run on the
-        // vector routine. Pointer validity is caller's responsibility.
-        self.rfind_raw_impl(start, end)
-    }
-
-    /// Execute a search using simd128 vectors and routines.
-    ///
-    /// # Safety
-    ///
-    /// Same as [`Two::find_raw`], except the distance between `start` and
-    /// `end` must be at least the size of a simd128 vector (in bytes).
-    ///
-    /// (The target feature safety obligation is automatically fulfilled by
-    /// virtue of being a method on `Two`, which can only be constructed
-    /// when it is safe to call `simd128` routines.)
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    unsafe fn find_raw_impl(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        self.0.find_raw(start, end)
-    }
-
-    /// Execute a search using simd128 vectors and routines.
-    ///
-    /// # Safety
-    ///
-    /// Same as [`Two::rfind_raw`], except the distance between `start` and
-    /// `end` must be at least the size of a simd128 vector (in bytes).
-    ///
-    /// (The target feature safety obligation is automatically fulfilled by
-    /// virtue of being a method on `Two`, which can only be constructed
-    /// when it is safe to call `simd128` routines.)
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    unsafe fn rfind_raw_impl(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        self.0.rfind_raw(start, end)
-    }
-
-    /// Returns an iterator over all occurrences of the needle bytes in the
-    /// given haystack.
-    ///
-    /// The iterator returned implements `DoubleEndedIterator`. This means it
-    /// can also be used to find occurrences in reverse order.
-    #[inline]
-    pub fn iter<'a, 'h>(&'a self, haystack: &'h [u8]) -> TwoIter<'a, 'h> {
-        TwoIter { searcher: self, it: generic::Iter::new(haystack) }
-    }
-}
-
-/// An iterator over all occurrences of two possible bytes in a haystack.
-///
-/// This iterator implements `DoubleEndedIterator`, which means it can also be
-/// used to find occurrences in reverse order.
-///
-/// This iterator is created by the [`Two::iter`] method.
-///
-/// The lifetime parameters are as follows:
-///
-/// * `'a` refers to the lifetime of the underlying [`Two`] searcher.
-/// * `'h` refers to the lifetime of the haystack being searched.
-#[derive(Clone, Debug)]
-pub struct TwoIter<'a, 'h> {
-    searcher: &'a Two,
-    it: generic::Iter<'h>,
-}
-
-impl<'a, 'h> Iterator for TwoIter<'a, 'h> {
-    type Item = usize;
-
-    #[inline]
-    fn next(&mut self) -> Option<usize> {
-        // SAFETY: We rely on the generic iterator to provide valid start
-        // and end pointers, but we guarantee that any pointer returned by
-        // 'find_raw' falls within the bounds of the start and end pointer.
-        unsafe { self.it.next(|s, e| self.searcher.find_raw(s, e)) }
-    }
-
-    #[inline]
-    fn size_hint(&self) -> (usize, Option<usize>) {
-        self.it.size_hint()
-    }
-}
-
-impl<'a, 'h> DoubleEndedIterator for TwoIter<'a, 'h> {
-    #[inline]
-    fn next_back(&mut self) -> Option<usize> {
-        // SAFETY: We rely on the generic iterator to provide valid start
-        // and end pointers, but we guarantee that any pointer returned by
-        // 'rfind_raw' falls within the bounds of the start and end pointer.
-        unsafe { self.it.next_back(|s, e| self.searcher.rfind_raw(s, e)) }
-    }
-}
-
-impl<'a, 'h> core::iter::FusedIterator for TwoIter<'a, 'h> {}
-
-/// Finds all occurrences of three bytes in a haystack.
-///
-/// That is, this reports matches of one of three possible bytes. For example,
-/// searching for `a`, `b` or `o` in `afoobar` would report matches at offsets
-/// `0`, `2`, `3`, `4` and `5`.
-#[derive(Clone, Copy, Debug)]
-pub struct Three(generic::Three<v128>);
-
-impl Three {
-    /// Create a new searcher that finds occurrences of the needle bytes given.
-    ///
-    /// This particular searcher is specialized to use simd128 vector
-    /// instructions that typically make it quite fast.
-    ///
-    /// If simd128 is unavailable in the current environment, then `None` is
-    /// returned.
-    #[inline]
-    pub fn new(needle1: u8, needle2: u8, needle3: u8) -> Option<Three> {
-        if Three::is_available() {
-            // SAFETY: we check that simd128 is available above.
-            unsafe { Some(Three::new_unchecked(needle1, needle2, needle3)) }
-        } else {
-            None
-        }
-    }
-
-    /// Create a new finder specific to simd128 vectors and routines without
-    /// checking that simd128 is available.
-    ///
-    /// # Safety
-    ///
-    /// Callers must guarantee that it is safe to execute `simd128`
-    /// instructions in the current environment.
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    pub unsafe fn new_unchecked(
-        needle1: u8,
-        needle2: u8,
-        needle3: u8,
-    ) -> Three {
-        Three(generic::Three::new(needle1, needle2, needle3))
-    }
-
-    /// Returns true when this implementation is available in the current
-    /// environment.
-    ///
-    /// When this is true, it is guaranteed that [`Three::new`] will return
-    /// a `Some` value. Similarly, when it is false, it is guaranteed that
-    /// `Three::new` will return a `None` value.
-    ///
-    /// Note also that for the lifetime of a single program, if this returns
-    /// true then it will always return true.
-    #[inline]
-    pub fn is_available() -> bool {
-        #[cfg(target_feature = "simd128")]
-        {
-            true
-        }
-        #[cfg(not(target_feature = "simd128"))]
-        {
-            false
-        }
-    }
-
-    /// Return the first occurrence of one of the needle bytes in the given
-    /// haystack. If no such occurrence exists, then `None` is returned.
-    ///
-    /// The occurrence is reported as an offset into `haystack`. Its maximum
-    /// value is `haystack.len() - 1`.
-    #[inline]
-    pub fn find(&self, haystack: &[u8]) -> Option<usize> {
-        // SAFETY: `find_raw` guarantees that if a pointer is returned, it
-        // falls within the bounds of the start and end pointers.
-        unsafe {
-            generic::search_slice_with_raw(haystack, |s, e| {
-                self.find_raw(s, e)
-            })
-        }
-    }
-
-    /// Return the last occurrence of one of the needle bytes in the given
-    /// haystack. If no such occurrence exists, then `None` is returned.
-    ///
-    /// The occurrence is reported as an offset into `haystack`. Its maximum
-    /// value is `haystack.len() - 1`.
-    #[inline]
-    pub fn rfind(&self, haystack: &[u8]) -> Option<usize> {
-        // SAFETY: `rfind_raw` guarantees that if a pointer is returned, it
-        // falls within the bounds of the start and end pointers.
-        unsafe {
-            generic::search_slice_with_raw(haystack, |s, e| {
-                self.rfind_raw(s, e)
-            })
-        }
-    }
-
-    /// Like `find`, but accepts and returns raw pointers.
-    ///
-    /// When a match is found, the pointer returned is guaranteed to be
-    /// `>= start` and `< end`.
-    ///
-    /// This routine is useful if you're already using raw pointers and would
-    /// like to avoid converting back to a slice before executing a search.
-    ///
-    /// # Safety
-    ///
-    /// * Both `start` and `end` must be valid for reads.
-    /// * Both `start` and `end` must point to an initialized value.
-    /// * Both `start` and `end` must point to the same allocated object and
-    /// must either be in bounds or at most one byte past the end of the
-    /// allocated object.
-    /// * Both `start` and `end` must be _derived from_ a pointer to the same
-    /// object.
-    /// * The distance between `start` and `end` must not overflow `isize`.
-    /// * The distance being in bounds must not rely on "wrapping around" the
-    /// address space.
-    ///
-    /// Note that callers may pass a pair of pointers such that `start >= end`.
-    /// In that case, `None` will always be returned.
-    #[inline]
-    pub unsafe fn find_raw(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        if start >= end {
-            return None;
-        }
-        if end.distance(start) < v128::BYTES {
-            // SAFETY: We require the caller to pass valid start/end pointers.
-            return generic::fwd_byte_by_byte(start, end, |b| {
-                b == self.0.needle1()
-                    || b == self.0.needle2()
-                    || b == self.0.needle3()
-            });
-        }
-        // SAFETY: Building a `Three` means it's safe to call 'simd128'
-        // routines. Also, we've checked that our haystack is big enough to run
-        // on the vector routine. Pointer validity is caller's responsibility.
-        self.find_raw_impl(start, end)
-    }
-
-    /// Like `rfind`, but accepts and returns raw pointers.
-    ///
-    /// When a match is found, the pointer returned is guaranteed to be
-    /// `>= start` and `< end`.
-    ///
-    /// This routine is useful if you're already using raw pointers and would
-    /// like to avoid converting back to a slice before executing a search.
-    ///
-    /// # Safety
-    ///
-    /// * Both `start` and `end` must be valid for reads.
-    /// * Both `start` and `end` must point to an initialized value.
-    /// * Both `start` and `end` must point to the same allocated object and
-    /// must either be in bounds or at most one byte past the end of the
-    /// allocated object.
-    /// * Both `start` and `end` must be _derived from_ a pointer to the same
-    /// object.
-    /// * The distance between `start` and `end` must not overflow `isize`.
-    /// * The distance being in bounds must not rely on "wrapping around" the
-    /// address space.
-    ///
-    /// Note that callers may pass a pair of pointers such that `start >= end`.
-    /// In that case, `None` will always be returned.
-    #[inline]
-    pub unsafe fn rfind_raw(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        if start >= end {
-            return None;
-        }
-        if end.distance(start) < v128::BYTES {
-            // SAFETY: We require the caller to pass valid start/end pointers.
-            return generic::rev_byte_by_byte(start, end, |b| {
-                b == self.0.needle1()
-                    || b == self.0.needle2()
-                    || b == self.0.needle3()
-            });
-        }
-        // SAFETY: Building a `Three` means it's safe to call 'simd128'
-        // routines. Also, we've checked that our haystack is big enough to run
-        // on the vector routine. Pointer validity is caller's responsibility.
-        self.rfind_raw_impl(start, end)
-    }
-
-    /// Execute a search using simd128 vectors and routines.
-    ///
-    /// # Safety
-    ///
-    /// Same as [`Three::find_raw`], except the distance between `start` and
-    /// `end` must be at least the size of a simd128 vector (in bytes).
-    ///
-    /// (The target feature safety obligation is automatically fulfilled by
-    /// virtue of being a method on `Three`, which can only be constructed
-    /// when it is safe to call `simd128` routines.)
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    unsafe fn find_raw_impl(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        self.0.find_raw(start, end)
-    }
-
-    /// Execute a search using simd128 vectors and routines.
-    ///
-    /// # Safety
-    ///
-    /// Same as [`Three::rfind_raw`], except the distance between `start` and
-    /// `end` must be at least the size of a simd128 vector (in bytes).
-    ///
-    /// (The target feature safety obligation is automatically fulfilled by
-    /// virtue of being a method on `Three`, which can only be constructed
-    /// when it is safe to call `simd128` routines.)
-    #[target_feature(enable = "simd128")]
-    #[inline]
-    unsafe fn rfind_raw_impl(
-        &self,
-        start: *const u8,
-        end: *const u8,
-    ) -> Option<*const u8> {
-        self.0.rfind_raw(start, end)
-    }
-
-    /// Returns an iterator over all occurrences of the needle byte in the
-    /// given haystack.
-    ///
-    /// The iterator returned implements `DoubleEndedIterator`. This means it
-    /// can also be used to find occurrences in reverse order.
-    #[inline]
-    pub fn iter<'a, 'h>(&'a self, haystack: &'h [u8]) -> ThreeIter<'a, 'h> {
-        ThreeIter { searcher: self, it: generic::Iter::new(haystack) }
-    }
-}
-
-/// An iterator over all occurrences of three possible bytes in a haystack.
-///
-/// This iterator implements `DoubleEndedIterator`, which means it can also be
-/// used to find occurrences in reverse order.
-///
-/// This iterator is created by the [`Three::iter`] method.
-///
-/// The lifetime parameters are as follows:
-///
-/// * `'a` refers to the lifetime of the underlying [`Three`] searcher.
-/// * `'h` refers to the lifetime of the haystack being searched.
-#[derive(Clone, Debug)]
-pub struct ThreeIter<'a, 'h> {
-    searcher: &'a Three,
-    it: generic::Iter<'h>,
-}
-
-impl<'a, 'h> Iterator for ThreeIter<'a, 'h> {
-    type Item = usize;
-
-    #[inline]
-    fn next(&mut self) -> Option<usize> {
-        // SAFETY: We rely on the generic iterator to provide valid start
-        // and end pointers, but we guarantee that any pointer returned by
-        // 'find_raw' falls within the bounds of the start and end pointer.
-        unsafe { self.it.next(|s, e| self.searcher.find_raw(s, e)) }
-    }
-
-    #[inline]
-    fn size_hint(&self) -> (usize, Option<usize>) {
-        self.it.size_hint()
-    }
-}
-
-impl<'a, 'h> DoubleEndedIterator for ThreeIter<'a, 'h> {
-    #[inline]
-    fn next_back(&mut self) -> Option<usize> {
-        // SAFETY: We rely on the generic iterator to provide valid start
-        // and end pointers, but we guarantee that any pointer returned by
-        // 'rfind_raw' falls within the bounds of the start and end pointer.
-        unsafe { self.it.next_back(|s, e| self.searcher.rfind_raw(s, e)) }
-    }
-}
-
-impl<'a, 'h> core::iter::FusedIterator for ThreeIter<'a, 'h> {}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    define_memchr_quickcheck!(super);
-
-    #[test]
-    fn forward_one() {
-        crate::tests::memchr::Runner::new(1).forward_iter(
-            |haystack, needles| {
-                Some(One::new(needles[0])?.iter(haystack).collect())
-            },
-        )
-    }
-
-    #[test]
-    fn reverse_one() {
-        crate::tests::memchr::Runner::new(1).reverse_iter(
-            |haystack, needles| {
-                Some(One::new(needles[0])?.iter(haystack).rev().collect())
-            },
-        )
-    }
-
-    #[test]
-    fn count_one() {
-        crate::tests::memchr::Runner::new(1).count_iter(|haystack, needles| {
-            Some(One::new(needles[0])?.iter(haystack).count())
-        })
-    }
-
-    #[test]
-    fn forward_two() {
-        crate::tests::memchr::Runner::new(2).forward_iter(
-            |haystack, needles| {
-                let n1 = needles.get(0).copied()?;
-                let n2 = needles.get(1).copied()?;
-                Some(Two::new(n1, n2)?.iter(haystack).collect())
-            },
-        )
-    }
-
-    #[test]
-    fn reverse_two() {
-        crate::tests::memchr::Runner::new(2).reverse_iter(
-            |haystack, needles| {
-                let n1 = needles.get(0).copied()?;
-                let n2 = needles.get(1).copied()?;
-                Some(Two::new(n1, n2)?.iter(haystack).rev().collect())
-            },
-        )
-    }
-
-    #[test]
-    fn forward_three() {
-        crate::tests::memchr::Runner::new(3).forward_iter(
-            |haystack, needles| {
-                let n1 = needles.get(0).copied()?;
-                let n2 = needles.get(1).copied()?;
-                let n3 = needles.get(2).copied()?;
-                Some(Three::new(n1, n2, n3)?.iter(haystack).collect())
-            },
-        )
-    }
-
-    #[test]
-    fn reverse_three() {
-        crate::tests::memchr::Runner::new(3).reverse_iter(
-            |haystack, needles| {
-                let n1 = needles.get(0).copied()?;
-                let n2 = needles.get(1).copied()?;
-                let n3 = needles.get(2).copied()?;
-                Some(Three::new(n1, n2, n3)?.iter(haystack).rev().collect())
-            },
-        )
-    }
-}