diff options
Diffstat (limited to 'vendor/flate2/src/deflate/write.rs')
| -rw-r--r-- | vendor/flate2/src/deflate/write.rs | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/vendor/flate2/src/deflate/write.rs b/vendor/flate2/src/deflate/write.rs new file mode 100644 index 0000000..2c44556 --- /dev/null +++ b/vendor/flate2/src/deflate/write.rs @@ -0,0 +1,322 @@ +use std::io; +use std::io::prelude::*; + +use crate::zio; +use crate::{Compress, Decompress}; + +/// A DEFLATE encoder, or compressor. +/// +/// This structure implements a [`Write`] interface and takes a stream of +/// uncompressed data, writing the compressed data to the wrapped writer. +/// +/// [`Write`]: https://doc.rust-lang.org/std/io/trait.Write.html +/// +/// # Examples +/// +/// ``` +/// use std::io::prelude::*; +/// use flate2::Compression; +/// use flate2::write::DeflateEncoder; +/// +/// // Vec<u8> implements Write to print the compressed bytes of sample string +/// # fn main() { +/// +/// let mut e = DeflateEncoder::new(Vec::new(), Compression::default()); +/// e.write_all(b"Hello World").unwrap(); +/// println!("{:?}", e.finish().unwrap()); +/// # } +/// ``` +#[derive(Debug)] +pub struct DeflateEncoder<W: Write> { + inner: zio::Writer<W, Compress>, +} + +impl<W: Write> DeflateEncoder<W> { + /// Creates a new encoder which will write compressed data to the stream + /// given at the given compression level. + /// + /// When this encoder is dropped or unwrapped the final pieces of data will + /// be flushed. + pub fn new(w: W, level: crate::Compression) -> DeflateEncoder<W> { + DeflateEncoder { + inner: zio::Writer::new(w, Compress::new(level, false)), + } + } + + /// Acquires a reference to the underlying writer. + pub fn get_ref(&self) -> &W { + self.inner.get_ref() + } + + /// Acquires a mutable reference to the underlying writer. + /// + /// Note that mutating the output/input state of the stream may corrupt this + /// object, so care must be taken when using this method. + pub fn get_mut(&mut self) -> &mut W { + self.inner.get_mut() + } + + /// Resets the state of this encoder entirely, swapping out the output + /// stream for another. + /// + /// This function will finish encoding the current stream into the current + /// output stream before swapping out the two output streams. If the stream + /// cannot be finished an error is returned. + /// + /// After the current stream has been finished, this will reset the internal + /// state of this encoder and replace the output stream with the one + /// provided, returning the previous output stream. Future data written to + /// this encoder will be the compressed into the stream `w` provided. + /// + /// # Errors + /// + /// This function will perform I/O to complete this stream, and any I/O + /// errors which occur will be returned from this function. + pub fn reset(&mut self, w: W) -> io::Result<W> { + self.inner.finish()?; + self.inner.data.reset(); + Ok(self.inner.replace(w)) + } + + /// Attempt to finish this output stream, writing out final chunks of data. + /// + /// Note that this function can only be used once data has finished being + /// written to the output stream. After this function is called then further + /// calls to `write` may result in a panic. + /// + /// # Panics + /// + /// Attempts to write data to this stream may result in a panic after this + /// function is called. + /// + /// # Errors + /// + /// This function will perform I/O to complete this stream, and any I/O + /// errors which occur will be returned from this function. + pub fn try_finish(&mut self) -> io::Result<()> { + self.inner.finish() + } + + /// Consumes this encoder, flushing the output stream. + /// + /// This will flush the underlying data stream, close off the compressed + /// stream and, if successful, return the contained writer. + /// + /// Note that this function may not be suitable to call in a situation where + /// the underlying stream is an asynchronous I/O stream. To finish a stream + /// the `try_finish` (or `shutdown`) method should be used instead. To + /// re-acquire ownership of a stream it is safe to call this method after + /// `try_finish` or `shutdown` has returned `Ok`. + /// + /// # Errors + /// + /// This function will perform I/O to complete this stream, and any I/O + /// errors which occur will be returned from this function. + pub fn finish(mut self) -> io::Result<W> { + self.inner.finish()?; + Ok(self.inner.take_inner()) + } + + /// Consumes this encoder, flushing the output stream. + /// + /// This will flush the underlying data stream and then return the contained + /// writer if the flush succeeded. + /// The compressed stream will not closed but only flushed. This + /// means that obtained byte array can by extended by another deflated + /// stream. To close the stream add the two bytes 0x3 and 0x0. + /// + /// # Errors + /// + /// This function will perform I/O to complete this stream, and any I/O + /// errors which occur will be returned from this function. + pub fn flush_finish(mut self) -> io::Result<W> { + self.inner.flush()?; + Ok(self.inner.take_inner()) + } + + /// Returns the number of bytes that have been written to this compressor. + /// + /// Note that not all bytes written to this object may be accounted for, + /// there may still be some active buffering. + pub fn total_in(&self) -> u64 { + self.inner.data.total_in() + } + + /// Returns the number of bytes that the compressor has produced. + /// + /// Note that not all bytes may have been written yet, some may still be + /// buffered. + pub fn total_out(&self) -> u64 { + self.inner.data.total_out() + } +} + +impl<W: Write> Write for DeflateEncoder<W> { + fn write(&mut self, buf: &[u8]) -> io::Result<usize> { + self.inner.write(buf) + } + + fn flush(&mut self) -> io::Result<()> { + self.inner.flush() + } +} + +impl<W: Read + Write> Read for DeflateEncoder<W> { + fn read(&mut self, buf: &mut [u8]) -> io::Result<usize> { + self.inner.get_mut().read(buf) + } +} + +/// A DEFLATE decoder, or decompressor. +/// +/// This structure implements a [`Write`] and will emit a stream of decompressed +/// data when fed a stream of compressed data. +/// +/// [`Write`]: https://doc.rust-lang.org/std/io/trait.Read.html +/// +/// # Examples +/// +/// ``` +/// use std::io::prelude::*; +/// use std::io; +/// # use flate2::Compression; +/// # use flate2::write::DeflateEncoder; +/// use flate2::write::DeflateDecoder; +/// +/// # fn main() { +/// # let mut e = DeflateEncoder::new(Vec::new(), Compression::default()); +/// # e.write_all(b"Hello World").unwrap(); +/// # let bytes = e.finish().unwrap(); +/// # println!("{}", decode_writer(bytes).unwrap()); +/// # } +/// // Uncompresses a Deflate Encoded vector of bytes and returns a string or error +/// // Here Vec<u8> implements Write +/// fn decode_writer(bytes: Vec<u8>) -> io::Result<String> { +/// let mut writer = Vec::new(); +/// let mut deflater = DeflateDecoder::new(writer); +/// deflater.write_all(&bytes[..])?; +/// writer = deflater.finish()?; +/// let return_string = String::from_utf8(writer).expect("String parsing error"); +/// Ok(return_string) +/// } +/// ``` +#[derive(Debug)] +pub struct DeflateDecoder<W: Write> { + inner: zio::Writer<W, Decompress>, +} + +impl<W: Write> DeflateDecoder<W> { + /// Creates a new decoder which will write uncompressed data to the stream. + /// + /// When this encoder is dropped or unwrapped the final pieces of data will + /// be flushed. + pub fn new(w: W) -> DeflateDecoder<W> { + DeflateDecoder { + inner: zio::Writer::new(w, Decompress::new(false)), + } + } + + /// Acquires a reference to the underlying writer. + pub fn get_ref(&self) -> &W { + self.inner.get_ref() + } + + /// Acquires a mutable reference to the underlying writer. + /// + /// Note that mutating the output/input state of the stream may corrupt this + /// object, so care must be taken when using this method. + pub fn get_mut(&mut self) -> &mut W { + self.inner.get_mut() + } + + /// Resets the state of this decoder entirely, swapping out the output + /// stream for another. + /// + /// This function will finish encoding the current stream into the current + /// output stream before swapping out the two output streams. + /// + /// This will then reset the internal state of this decoder and replace the + /// output stream with the one provided, returning the previous output + /// stream. Future data written to this decoder will be decompressed into + /// the output stream `w`. + /// + /// # Errors + /// + /// This function will perform I/O to finish the stream, and if that I/O + /// returns an error then that will be returned from this function. + pub fn reset(&mut self, w: W) -> io::Result<W> { + self.inner.finish()?; + self.inner.data = Decompress::new(false); + Ok(self.inner.replace(w)) + } + + /// Attempt to finish this output stream, writing out final chunks of data. + /// + /// Note that this function can only be used once data has finished being + /// written to the output stream. After this function is called then further + /// calls to `write` may result in a panic. + /// + /// # Panics + /// + /// Attempts to write data to this stream may result in a panic after this + /// function is called. + /// + /// # Errors + /// + /// This function will perform I/O to finish the stream, returning any + /// errors which happen. + pub fn try_finish(&mut self) -> io::Result<()> { + self.inner.finish() + } + + /// Consumes this encoder, flushing the output stream. + /// + /// This will flush the underlying data stream and then return the contained + /// writer if the flush succeeded. + /// + /// Note that this function may not be suitable to call in a situation where + /// the underlying stream is an asynchronous I/O stream. To finish a stream + /// the `try_finish` (or `shutdown`) method should be used instead. To + /// re-acquire ownership of a stream it is safe to call this method after + /// `try_finish` or `shutdown` has returned `Ok`. + /// + /// # Errors + /// + /// This function will perform I/O to complete this stream, and any I/O + /// errors which occur will be returned from this function. + pub fn finish(mut self) -> io::Result<W> { + self.inner.finish()?; + Ok(self.inner.take_inner()) + } + + /// Returns the number of bytes that the decompressor has consumed for + /// decompression. + /// + /// Note that this will likely be smaller than the number of bytes + /// successfully written to this stream due to internal buffering. + pub fn total_in(&self) -> u64 { + self.inner.data.total_in() + } + + /// Returns the number of bytes that the decompressor has written to its + /// output stream. + pub fn total_out(&self) -> u64 { + self.inner.data.total_out() + } +} + +impl<W: Write> Write for DeflateDecoder<W> { + fn write(&mut self, buf: &[u8]) -> io::Result<usize> { + self.inner.write(buf) + } + + fn flush(&mut self) -> io::Result<()> { + self.inner.flush() + } +} + +impl<W: Read + Write> Read for DeflateDecoder<W> { + fn read(&mut self, buf: &mut [u8]) -> io::Result<usize> { + self.inner.get_mut().read(buf) + } +} |