Initial commit

1 files changed, 210 insertions, 0 deletions

diff --git a/Marlin/src/HAL/AVR/HAL.h b/Marlin/src/HAL/AVR/HAL.h
new file mode 100644
index 0000000..5e22ac0
--- /dev/null
+++ b/Marlin/src/HAL/AVR/HAL.h
@@ -0,0 +1,210 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../shared/Marduino.h"
+#include "../shared/HAL_SPI.h"
+#include "fastio.h"
+#include "watchdog.h"
+#include "math.h"
+
+#ifdef USBCON
+  #include <HardwareSerial.h>
+#else
+  #define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
+  #include "MarlinSerial.h"
+#endif
+
+#include <stdint.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+#ifndef pgm_read_ptr
+  // Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
+  // Windows Subsystem for Linux on Windows 10 as of 10/18/2019
+  #define pgm_read_ptr_far(address_long) (void*)__ELPM_word((uint32_t)(address_long))
+  #define pgm_read_ptr_near(address_short) (void*)__LPM_word((uint16_t)(address_short))
+  #define pgm_read_ptr(address_short) pgm_read_ptr_near(address_short)
+#endif
+
+// ------------------------
+// Defines
+// ------------------------
+
+// AVR PROGMEM extension for sprintf_P
+#define S_FMT "%S"
+
+// AVR PROGMEM extension for string define
+#define PGMSTR(NAM,STR) const char NAM[] PROGMEM = STR
+
+#ifndef CRITICAL_SECTION_START
+  #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
+  #define CRITICAL_SECTION_END()    SREG = _sreg
+#endif
+#define ISRS_ENABLED() TEST(SREG, SREG_I)
+#define ENABLE_ISRS()  sei()
+#define DISABLE_ISRS() cli()
+
+// ------------------------
+// Types
+// ------------------------
+
+typedef int8_t pin_t;
+
+#define SHARED_SERVOS HAS_SERVOS
+#define HAL_SERVO_LIB Servo
+
+// ------------------------
+// Public Variables
+// ------------------------
+
+//extern uint8_t MCUSR;
+
+// Serial ports
+#ifdef USBCON
+  #include "../../core/serial_hook.h"
+  typedef ForwardSerial0Type< decltype(Serial) > DefaultSerial;
+  extern DefaultSerial MSerial;
+  #ifdef BLUETOOTH
+    typedef ForwardSerial0Type< decltype(bluetoothSerial) > BTSerial;
+    extern BTSerial btSerial;
+  #endif
+
+  #define MYSERIAL0 TERN(BLUETOOTH, btSerial, MSerial)
+#else
+  #if !WITHIN(SERIAL_PORT, -1, 3)
+    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #endif
+  #define MYSERIAL0 customizedSerial1
+
+  #ifdef SERIAL_PORT_2
+    #if !WITHIN(SERIAL_PORT_2, -1, 3)
+      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+    #endif
+    #define MYSERIAL1 customizedSerial2
+  #endif
+#endif
+
+#ifdef MMU2_SERIAL_PORT
+  #if !WITHIN(MMU2_SERIAL_PORT, -1, 3)
+    #error "MMU2_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #endif
+  #define MMU2_SERIAL mmuSerial
+#endif
+
+#ifdef LCD_SERIAL_PORT
+  #if !WITHIN(LCD_SERIAL_PORT, -1, 3)
+    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #endif
+  #define LCD_SERIAL lcdSerial
+  #if HAS_DGUS_LCD
+    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
+  #endif
+#endif
+
+// ------------------------
+// Public functions
+// ------------------------
+
+void HAL_init();
+
+//void cli();
+
+//void _delay_ms(const int delay);
+
+inline void HAL_clear_reset_source() { MCUSR = 0; }
+inline uint8_t HAL_get_reset_source() { return MCUSR; }
+
+inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
+extern "C" int freeMemory();
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
+
+// ADC
+#ifdef DIDR2
+  #define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)
+#else
+  #define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind);
+#endif
+
+inline void HAL_adc_init() {
+  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
+  DIDR0 = 0;
+  #ifdef DIDR2
+    DIDR2 = 0;
+  #endif
+}
+
+#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC)
+#ifdef MUX5
+  #define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
+#else
+  #define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
+#endif
+
+#define HAL_ADC_VREF        5.0
+#define HAL_ADC_RESOLUTION 10
+#define HAL_READ_ADC()  ADC
+#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
+
+#define GET_PIN_MAP_PIN(index) index
+#define GET_PIN_MAP_INDEX(pin) pin
+#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
+
+#define HAL_SENSITIVE_PINS 0, 1
+
+#ifdef __AVR_AT90USB1286__
+  #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
+#endif
+
+// AVR compatibility
+#define strtof strtod
+
+#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
+
+/**
+ *  set_pwm_frequency
+ *  Sets the frequency of the timer corresponding to the provided pin
+ *  as close as possible to the provided desired frequency. Internally
+ *  calculates the required waveform generation mode, prescaler and
+ *  resolution values required and sets the timer registers accordingly.
+ *  NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
+ *  NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
+ */
+void set_pwm_frequency(const pin_t pin, int f_desired);
+
+/**
+ * set_pwm_duty
+ *  Sets the PWM duty cycle of the provided pin to the provided value
+ *  Optionally allows inverting the duty cycle [default = false]
+ *  Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
+ */
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);