Initial commit

1 files changed, 296 insertions, 0 deletions

diff --git a/Marlin/src/HAL/DUE/usb/conf_usb.h b/Marlin/src/HAL/DUE/usb/conf_usb.h
new file mode 100644
index 0000000..4de9e34
--- /dev/null
+++ b/Marlin/src/HAL/DUE/usb/conf_usb.h
@@ -0,0 +1,296 @@
+/**
+ * \file
+ *
+ * \brief USB configuration file
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _CONF_USB_H_
+#define _CONF_USB_H_
+
+#undef UNUSED                           /* To avoid a macro clash as macros.h already defines it */
+#include "../../../inc/MarlinConfigPre.h"
+#include "compiler.h"
+
+/**
+ * USB Device Configuration
+ * @{
+ */
+
+//! Device definition (mandatory)
+#define  USB_DEVICE_MAJOR_VERSION         1
+#define  USB_DEVICE_MINOR_VERSION         0
+#define  USB_DEVICE_POWER                 100 // Consumption on Vbus line (mA)
+#define  USB_DEVICE_ATTR                  \
+  (USB_CONFIG_ATTR_SELF_POWERED)
+// (USB_CONFIG_ATTR_BUS_POWERED)
+//  (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
+//  (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
+
+/**
+ * Device speeds support
+ * Low speed not supported by CDC and MSC
+ * @{
+ */
+
+//! To define a Low speed device
+//#define  USB_DEVICE_LOW_SPEED
+
+//! To define a Full speed device
+//#define USB_DEVICE_FULL_SPEED
+
+//! To authorize the High speed
+#ifndef USB_DEVICE_FULL_SPEED
+  #if (UC3A3||UC3A4)
+    #define  USB_DEVICE_HS_SUPPORT
+  #elif (SAM3XA||SAM3U)
+    #define  USB_DEVICE_HS_SUPPORT
+  #endif
+#endif
+//@}
+
+
+/**
+ * USB Device Callbacks definitions (Optional)
+ * @{
+ */
+#define  UDC_VBUS_EVENT(b_vbus_high)
+#define  UDC_SOF_EVENT()
+#define  UDC_SUSPEND_EVENT()
+#define  UDC_RESUME_EVENT()
+#define  UDC_GET_EXTRA_STRING()         usb_task_extra_string()
+#define  USB_DEVICE_SPECIFIC_REQUEST()  usb_task_other_requests()
+//@}
+
+#if ENABLED(SDSUPPORT)
+  /**
+   * USB Device low level configuration
+   * When only one interface is used, these configurations are defined by the class module.
+   * For composite device, these configuration must be defined here
+   * @{
+   */
+  //! Control endpoint size
+  #define  USB_DEVICE_EP_CTRL_SIZE       64
+
+  //! Two interfaces for this device (CDC COM + CDC DATA + MSC)
+  #define  USB_DEVICE_NB_INTERFACE       3
+
+  //! 5 endpoints used by CDC and MSC interfaces
+  #if SAM3U
+  // (3 | USB_EP_DIR_IN)  // CDC Notify endpoint
+  // (6 | USB_EP_DIR_IN)  // CDC TX
+  // (5 | USB_EP_DIR_OUT) // CDC RX
+  // (1 | USB_EP_DIR_IN)  // MSC IN
+  // (2 | USB_EP_DIR_OUT) // MSC OUT
+  #  define  USB_DEVICE_MAX_EP           6
+  #  if defined(USB_DEVICE_HS_SUPPORT)
+  // In HS mode, size of bulk endpoints are 512
+  // If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
+  // endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
+  // endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
+  #     define  UDD_BULK_NB_BANK(ep) ((ep == 5 || ep== 6) ? 1 : 2)
+  #endif
+  #else
+  // (3 | USB_EP_DIR_IN)  // CDC Notify endpoint
+  // (4 | USB_EP_DIR_IN)  // CDC TX
+  // (5 | USB_EP_DIR_OUT) // CDC RX
+  // (1 | USB_EP_DIR_IN)  // MSC IN
+  // (2 | USB_EP_DIR_OUT) // MSC OUT
+  #  define  USB_DEVICE_MAX_EP           5
+  #  if SAM3XA && defined(USB_DEVICE_HS_SUPPORT)
+  // In HS mode, size of bulk endpoints are 512
+  // If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
+  // endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
+  // endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
+  #     define  UDD_BULK_NB_BANK(ep) ((ep == 4 || ep== 5) ? 1 : 2)
+  #  endif
+  #endif
+#endif
+
+//@}
+
+//@}
+
+
+/**
+ * USB Interface Configuration
+ * @{
+ */
+/**
+ * Configuration of CDC interface
+ * @{
+ */
+
+//! Define one USB communication ports
+#define  UDI_CDC_PORT_NB 1
+
+//! Interface callback definition
+#define  UDI_CDC_ENABLE_EXT(port)         usb_task_cdc_enable(port)
+#define  UDI_CDC_DISABLE_EXT(port)        usb_task_cdc_disable(port)
+#define  UDI_CDC_RX_NOTIFY(port)          usb_task_cdc_rx_notify(port)
+#define  UDI_CDC_TX_EMPTY_NOTIFY(port)
+#define  UDI_CDC_SET_CODING_EXT(port,cfg) usb_task_cdc_config(port,cfg)
+#define  UDI_CDC_SET_DTR_EXT(port,set)    usb_task_cdc_set_dtr(port,set)
+#define  UDI_CDC_SET_RTS_EXT(port,set)
+
+//! Define it when the transfer CDC Device to Host is a low rate (<512000 bauds)
+//! to reduce CDC buffers size
+//#define  UDI_CDC_LOW_RATE
+
+//! Default configuration of communication port
+#define  UDI_CDC_DEFAULT_RATE             115200
+#define  UDI_CDC_DEFAULT_STOPBITS         CDC_STOP_BITS_1
+#define  UDI_CDC_DEFAULT_PARITY           CDC_PAR_NONE
+#define  UDI_CDC_DEFAULT_DATABITS         8
+
+//! Enable id string of interface to add an extra USB string
+#define  UDI_CDC_IAD_STRING_ID            4
+
+#if ENABLED(SDSUPPORT)
+  /**
+   * USB CDC low level configuration
+   * In standalone these configurations are defined by the CDC module.
+   * For composite device, these configuration must be defined here
+   * @{
+   */
+  //! Endpoint numbers definition
+  #if SAM3U
+  #  define  UDI_CDC_COMM_EP_0             (3 | USB_EP_DIR_IN) // Notify endpoint
+  #  define  UDI_CDC_DATA_EP_IN_0          (6 | USB_EP_DIR_IN) // TX
+  #  define  UDI_CDC_DATA_EP_OUT_0         (5 | USB_EP_DIR_OUT)// RX
+  #else
+  #  define  UDI_CDC_COMM_EP_0             (3 | USB_EP_DIR_IN) // Notify endpoint
+  #  define  UDI_CDC_DATA_EP_IN_0          (4 | USB_EP_DIR_IN) // TX
+  #  define  UDI_CDC_DATA_EP_OUT_0         (5 | USB_EP_DIR_OUT)// RX
+  #endif
+
+  //! Interface numbers
+  #define  UDI_CDC_COMM_IFACE_NUMBER_0   0
+  #define  UDI_CDC_DATA_IFACE_NUMBER_0   1
+
+  //@}
+  //@}
+
+
+  /**
+   * Configuration of MSC interface
+   * @{
+   */
+  //! Vendor name and Product version of MSC interface
+  #define UDI_MSC_GLOBAL_VENDOR_ID            \
+     'M', 'A', 'R', 'L', 'I', 'N', '3', 'D'
+  #define UDI_MSC_GLOBAL_PRODUCT_VERSION            \
+     '1', '.', '0', '0'
+
+  //! Interface callback definition
+  #define  UDI_MSC_ENABLE_EXT()          usb_task_msc_enable()
+  #define  UDI_MSC_DISABLE_EXT()         usb_task_msc_disable()
+
+  //! Enable id string of interface to add an extra USB string
+  #define  UDI_MSC_STRING_ID             5
+
+  /**
+   * USB MSC low level configuration
+   * In standalone these configurations are defined by the MSC module.
+   * For composite device, these configuration must be defined here
+   * @{
+   */
+  //! Endpoint numbers definition
+  #define  UDI_MSC_EP_IN                 (1 | USB_EP_DIR_IN)
+  #define  UDI_MSC_EP_OUT                (2 | USB_EP_DIR_OUT)
+
+  //! Interface number
+  #define  UDI_MSC_IFACE_NUMBER          2
+  //@}
+  //@}
+
+  //@}
+
+
+  /**
+   * Description of Composite Device
+   * @{
+   */
+  //! USB Interfaces descriptor structure
+  #define UDI_COMPOSITE_DESC_T \
+    usb_iad_desc_t       udi_cdc_iad; \
+    udi_cdc_comm_desc_t  udi_cdc_comm; \
+    udi_cdc_data_desc_t  udi_cdc_data; \
+    udi_msc_desc_t       udi_msc
+
+  //! USB Interfaces descriptor value for Full Speed
+  #define UDI_COMPOSITE_DESC_FS \
+    .udi_cdc_iad   = UDI_CDC_IAD_DESC_0, \
+    .udi_cdc_comm  = UDI_CDC_COMM_DESC_0, \
+    .udi_cdc_data  = UDI_CDC_DATA_DESC_0_FS, \
+    .udi_msc       = UDI_MSC_DESC_FS
+
+  //! USB Interfaces descriptor value for High Speed
+  #define UDI_COMPOSITE_DESC_HS \
+    .udi_cdc_iad   = UDI_CDC_IAD_DESC_0, \
+    .udi_cdc_comm  = UDI_CDC_COMM_DESC_0, \
+    .udi_cdc_data  = UDI_CDC_DATA_DESC_0_HS, \
+    .udi_msc       = UDI_MSC_DESC_HS
+
+  //! USB Interface APIs
+  #define UDI_COMPOSITE_API \
+    &udi_api_cdc_comm, \
+    &udi_api_cdc_data, \
+    &udi_api_msc
+  //@}
+
+  /**
+   * USB Device Driver Configuration
+   * @{
+   */
+  //@}
+
+  //! The includes of classes and other headers must be done at the end of this file to avoid compile error
+  #include "udi_cdc.h"
+  #include "udi_msc.h"
+#else
+  #include "udi_cdc_conf.h"
+#endif
+
+#include "usb_task.h"
+
+#endif // _CONF_USB_H_