Initial commit

1 files changed, 147 insertions, 0 deletions

diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
new file mode 100644
index 0000000..0fef308
--- /dev/null
+++ b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
@@ -0,0 +1,147 @@
+/**
+ * \file
+ *
+ * \brief USB Mass Storage Class (MSC) protocol definitions.
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _USB_PROTOCOL_MSC_H_
+#define _USB_PROTOCOL_MSC_H_
+
+
+/**
+ * \ingroup usb_protocol_group
+ * \defgroup usb_msc_protocol USB Mass Storage Class (MSC) protocol definitions
+ *
+ * @{
+ */
+
+/**
+ * \name Possible Class value
+ */
+//@{
+#define  MSC_CLASS                  0x08
+//@}
+
+/**
+ * \name Possible SubClass value
+ * \note In practise, most devices should use
+ * #MSC_SUBCLASS_TRANSPARENT and specify the actual command set in
+ * the standard INQUIRY data block, even if the MSC spec indicates
+ * otherwise. In particular, RBC is not supported by certain major
+ * operating systems like Windows XP.
+ */
+//@{
+#define  MSC_SUBCLASS_RBC           0x01	//!< Reduced Block Commands
+#define  MSC_SUBCLASS_ATAPI         0x02	//!< CD/DVD devices
+#define  MSC_SUBCLASS_QIC_157       0x03	//!< Tape devices
+#define  MSC_SUBCLASS_UFI           0x04	//!< Floppy disk drives
+#define  MSC_SUBCLASS_SFF_8070I     0x05	//!< Floppy disk drives
+#define  MSC_SUBCLASS_TRANSPARENT   0x06	//!< Determined by INQUIRY
+//@}
+
+/**
+ * \name Possible protocol value
+ * \note Only the BULK protocol should be used in new designs.
+ */
+//@{
+#define  MSC_PROTOCOL_CBI           0x00	//!< Command/Bulk/Interrupt
+#define  MSC_PROTOCOL_CBI_ALT       0x01	//!< W/o command completion
+#define  MSC_PROTOCOL_BULK          0x50	//!< Bulk-only
+//@}
+
+
+/**
+ * \brief MSC USB requests (bRequest)
+ */
+enum usb_reqid_msc {
+	USB_REQ_MSC_BULK_RESET = 0xFF,	//!< Mass Storage Reset
+	USB_REQ_MSC_GET_MAX_LUN = 0xFE 	//!< Get Max LUN
+};
+
+
+COMPILER_PACK_SET(1)
+
+/**
+ * \name A Command Block Wrapper (CBW).
+ */
+//@{
+struct usb_msc_cbw {
+	le32_t dCBWSignature;	//!< Must contain 'USBC'
+	le32_t dCBWTag;	//!< Unique command ID
+	le32_t dCBWDataTransferLength;	//!< Number of bytes to transfer
+	uint8_t bmCBWFlags;	//!< Direction in bit 7
+	uint8_t bCBWLUN;	//!< Logical Unit Number
+	uint8_t bCBWCBLength;	//!< Number of valid CDB bytes
+	uint8_t CDB[16];	//!< SCSI Command Descriptor Block
+};
+
+#define  USB_CBW_SIGNATURE          0x55534243	//!< dCBWSignature value
+#define  USB_CBW_DIRECTION_IN       (1<<7)	//!< Data from device to host
+#define  USB_CBW_DIRECTION_OUT      (0<<7)	//!< Data from host to device
+#define  USB_CBW_LUN_MASK           0x0F	//!< Valid bits in bCBWLUN
+#define  USB_CBW_LEN_MASK           0x1F	//!< Valid bits in bCBWCBLength
+//@}
+
+
+/**
+ * \name A Command Status Wrapper (CSW).
+ */
+//@{
+struct usb_msc_csw {
+	le32_t dCSWSignature;	//!< Must contain 'USBS'
+	le32_t dCSWTag;	//!< Same as dCBWTag
+	le32_t dCSWDataResidue;	//!< Number of bytes not transfered
+	uint8_t bCSWStatus;	//!< Status code
+};
+
+#define  USB_CSW_SIGNATURE          0x55534253	//!< dCSWSignature value
+#define  USB_CSW_STATUS_PASS        0x00	//!< Command Passed
+#define  USB_CSW_STATUS_FAIL        0x01	//!< Command Failed
+#define  USB_CSW_STATUS_PE          0x02	//!< Phase Error
+//@}
+
+COMPILER_PACK_RESET()
+
+//@}
+
+#endif // _USB_PROTOCOL_MSC_H_