Initial commit

1 files changed, 219 insertions, 0 deletions

diff --git a/Marlin/src/HAL/STM32/HAL_SPI.cpp b/Marlin/src/HAL/STM32/HAL_SPI.cpp
new file mode 100644
index 0000000..eef4807
--- /dev/null
+++ b/Marlin/src/HAL/STM32/HAL_SPI.cpp
@@ -0,0 +1,219 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
+
+#include "../../inc/MarlinConfig.h"
+
+#include <SPI.h>
+
+// ------------------------
+// Public Variables
+// ------------------------
+
+static SPISettings spiConfig;
+
+// ------------------------
+// Public functions
+// ------------------------
+
+#if ENABLED(SOFTWARE_SPI)
+
+  // ------------------------
+  // Software SPI
+  // ------------------------
+
+  #include "../shared/Delay.h"
+
+  void spiBegin(void) {
+    OUT_WRITE(SD_SS_PIN, HIGH);
+    OUT_WRITE(SD_SCK_PIN, HIGH);
+    SET_INPUT(SD_MISO_PIN);
+    OUT_WRITE(SD_MOSI_PIN, HIGH);
+  }
+
+  static uint16_t delay_STM32_soft_spi;
+
+  void spiInit(uint8_t spiRate) {
+    // Use datarates Marlin uses
+    switch (spiRate) {
+      case SPI_FULL_SPEED:   delay_STM32_soft_spi =  125; break;  // desired: 8,000,000  actual: ~1.1M
+      case SPI_HALF_SPEED:   delay_STM32_soft_spi =  125; break;  // desired: 4,000,000  actual: ~1.1M
+      case SPI_QUARTER_SPEED:delay_STM32_soft_spi =  250; break;  // desired: 2,000,000  actual: ~890K
+      case SPI_EIGHTH_SPEED: delay_STM32_soft_spi =  500; break;  // desired: 1,000,000  actual: ~590K
+      case SPI_SPEED_5:      delay_STM32_soft_spi = 1000; break;  // desired:   500,000  actual: ~360K
+      case SPI_SPEED_6:      delay_STM32_soft_spi = 2000; break;  // desired:   250,000  actual: ~210K
+      default:               delay_STM32_soft_spi = 4000; break;  // desired:   125,000  actual: ~123K
+    }
+    SPI.begin();
+  }
+
+  // Begin SPI transaction, set clock, bit order, data mode
+  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { /* do nothing */ }
+
+  uint8_t HAL_SPI_STM32_SpiTransfer_Mode_3(uint8_t b) { // using Mode 3
+    for (uint8_t bits = 8; bits--;) {
+      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SD_MOSI_PIN, b & 0x80);
+
+      DELAY_NS(delay_STM32_soft_spi);
+      WRITE(SD_SCK_PIN, HIGH);
+      DELAY_NS(delay_STM32_soft_spi);
+
+      b <<= 1;        // little setup time
+      b |= (READ(SD_MISO_PIN) != 0);
+    }
+    DELAY_NS(125);
+    return b;
+  }
+
+  // Soft SPI receive byte
+  uint8_t spiRec() {
+    DISABLE_ISRS();                                               // No interrupts during byte receive
+    const uint8_t data = HAL_SPI_STM32_SpiTransfer_Mode_3(0xFF);
+    ENABLE_ISRS();                                                // Enable interrupts
+    return data;
+  }
+
+  // Soft SPI read data
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
+    for (uint16_t i = 0; i < nbyte; i++)
+      buf[i] = spiRec();
+  }
+
+  // Soft SPI send byte
+  void spiSend(uint8_t data) {
+    DISABLE_ISRS();                         // No interrupts during byte send
+    HAL_SPI_STM32_SpiTransfer_Mode_3(data); // Don't care what is received
+    ENABLE_ISRS();                          // Enable interrupts
+  }
+
+  // Soft SPI send block
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
+    spiSend(token);
+    for (uint16_t i = 0; i < 512; i++)
+      spiSend(buf[i]);
+  }
+
+#else
+
+  // ------------------------
+  // Hardware SPI
+  // ------------------------
+
+  /**
+   * VGPV SPI speed start and PCLK2/2, by default 108/2 = 54Mhz
+   */
+
+  /**
+   * @brief  Begin SPI port setup
+   *
+   * @return Nothing
+   *
+   * @details Only configures SS pin since stm32duino creates and initialize the SPI object
+   */
+  void spiBegin() {
+    #if PIN_EXISTS(SD_SS)
+      OUT_WRITE(SD_SS_PIN, HIGH);
+    #endif
+  }
+
+  // Configure SPI for specified SPI speed
+  void spiInit(uint8_t spiRate) {
+    // Use datarates Marlin uses
+    uint32_t clock;
+    switch (spiRate) {
+      case SPI_FULL_SPEED:    clock = 20000000; break; // 13.9mhz=20000000  6.75mhz=10000000  3.38mhz=5000000  .833mhz=1000000
+      case SPI_HALF_SPEED:    clock =  5000000; break;
+      case SPI_QUARTER_SPEED: clock =  2500000; break;
+      case SPI_EIGHTH_SPEED:  clock =  1250000; break;
+      case SPI_SPEED_5:       clock =   625000; break;
+      case SPI_SPEED_6:       clock =   300000; break;
+      default:
+        clock = 4000000; // Default from the SPI library
+    }
+    spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
+
+    #if ENABLED(CUSTOM_SPI_PINS)
+      SPI.setMISO(SD_MISO_PIN);
+      SPI.setMOSI(SD_MOSI_PIN);
+      SPI.setSCLK(SD_SCK_PIN);
+    #endif
+
+    SPI.begin();
+  }
+
+  /**
+   * @brief  Receives a single byte from the SPI port.
+   *
+   * @return Byte received
+   *
+   * @details
+   */
+  uint8_t spiRec() {
+    uint8_t returnByte = SPI.transfer(0xFF);
+    return returnByte;
+  }
+
+  /**
+   * @brief  Receive a number of bytes from the SPI port to a buffer
+   *
+   * @param  buf   Pointer to starting address of buffer to write to.
+   * @param  nbyte Number of bytes to receive.
+   * @return Nothing
+   *
+   * @details Uses DMA
+   */
+  void spiRead(uint8_t* buf, uint16_t nbyte) {
+    if (nbyte == 0) return;
+    memset(buf, 0xFF, nbyte);
+    SPI.transfer(buf, nbyte);
+  }
+
+  /**
+   * @brief  Send a single byte on SPI port
+   *
+   * @param  b Byte to send
+   *
+   * @details
+   */
+  void spiSend(uint8_t b) {
+    SPI.transfer(b);
+  }
+
+  /**
+   * @brief  Write token and then write from 512 byte buffer to SPI (for SD card)
+   *
+   * @param  buf   Pointer with buffer start address
+   * @return Nothing
+   *
+   * @details Use DMA
+   */
+  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+    uint8_t rxBuf[512];
+    SPI.transfer(token);
+    SPI.transfer((uint8_t*)buf, &rxBuf, 512);
+  }
+
+#endif // SOFTWARE_SPI
+
+#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC