Initial commit

1 files changed, 82 insertions, 0 deletions

diff --git a/Marlin/src/HAL/STM32F1/msc_sd.cpp b/Marlin/src/HAL/STM32F1/msc_sd.cpp
new file mode 100644
index 0000000..548a6db
--- /dev/null
+++ b/Marlin/src/HAL/STM32F1/msc_sd.cpp
@@ -0,0 +1,82 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 BigTreeTech [https://github.com/bigtreetech]
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../inc/MarlinConfigPre.h"
+
+#if defined(__STM32F1__) && HAS_SD_HOST_DRIVE
+
+#include "msc_sd.h"
+#include "SPI.h"
+
+#define PRODUCT_ID 0x29
+
+USBMassStorage MarlinMSC;
+Serial0Type<USBCompositeSerial> MarlinCompositeSerial(true);
+
+#include "../../inc/MarlinConfig.h"
+
+#if SD_CONNECTION_IS(ONBOARD)
+
+  #include "onboard_sd.h"
+
+  static bool MSC_Write(const uint8_t *writebuff, uint32_t startSector, uint16_t numSectors) {
+    return (disk_write(0, writebuff, startSector, numSectors) == RES_OK);
+  }
+  static bool MSC_Read(uint8_t *readbuff, uint32_t startSector, uint16_t numSectors) {
+    return (disk_read(0, readbuff, startSector, numSectors) == RES_OK);
+  }
+
+#endif
+
+#if ENABLED(EMERGENCY_PARSER)
+  void (*real_rx_callback)(void);
+
+  void my_rx_callback(void) {
+    real_rx_callback();
+    int len = MarlinCompositeSerial.available();
+    while (len-- > 0) // >0 because available() may return a negative value
+      emergency_parser.update(MarlinCompositeSerial.emergency_state, MarlinCompositeSerial.peek());
+  }
+#endif
+
+void MSC_SD_init() {
+  USBComposite.setProductId(PRODUCT_ID);
+  // Just set MarlinCompositeSerial enabled to true
+  // because when MarlinCompositeSerial.begin() is used in setup()
+  // it clears all USBComposite devices.
+  MarlinCompositeSerial.begin();
+  USBComposite.end();
+  USBComposite.clear();
+  // Set api and register mass storage
+  #if SD_CONNECTION_IS(ONBOARD)
+    uint32_t cardSize;
+    if (disk_initialize(0) == RES_OK) {
+      if (disk_ioctl(0, GET_SECTOR_COUNT, (void *)(&cardSize)) == RES_OK) {
+        MarlinMSC.setDriveData(0, cardSize, MSC_Read, MSC_Write);
+        MarlinMSC.registerComponent();
+      }
+    }
+  #endif
+  // Register composite Serial
+  MarlinCompositeSerial.registerComponent();
+  USBComposite.begin();
+  #if ENABLED(EMERGENCY_PARSER)
+    //rx is usbSerialPart.endpoints[2]
+    real_rx_callback = usbSerialPart.endpoints[2].callback;
+    usbSerialPart.endpoints[2].callback = my_rx_callback;
+  #endif
+}
+
+#endif // __STM32F1__ && HAS_SD_HOST_DRIVE