Initial commit

1 files changed, 139 insertions, 0 deletions

diff --git a/Marlin/src/HAL/shared/HAL_spi_L6470.cpp b/Marlin/src/HAL/shared/HAL_spi_L6470.cpp
new file mode 100644
index 0000000..bd85dbe
--- /dev/null
+++ b/Marlin/src/HAL/shared/HAL_spi_L6470.cpp
@@ -0,0 +1,139 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Software L6470 SPI functions originally from Arduino Sd2Card Library
+ * Copyright (c) 2009 by William Greiman
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_L64XX
+
+#include "Delay.h"
+
+#include "../../core/serial.h"
+#include "../../libs/L64XX/L64XX_Marlin.h"
+
+// Make sure GCC optimizes this file.
+// Note that this line triggers a bug in GCC which is fixed by casting.
+// See the note below.
+#pragma GCC optimize (3)
+
+// run at ~4Mhz
+inline uint8_t L6470_SpiTransfer_Mode_0(uint8_t b) { // using Mode 0
+  for (uint8_t bits = 8; bits--;) {
+    WRITE(L6470_CHAIN_MOSI_PIN, b & 0x80);
+    b <<= 1;        // little setup time
+
+    WRITE(L6470_CHAIN_SCK_PIN, HIGH);
+    DELAY_NS(125);  // 10 cycles @ 84mhz
+
+    b |= (READ(L6470_CHAIN_MISO_PIN) != 0);
+
+    WRITE(L6470_CHAIN_SCK_PIN, LOW);
+    DELAY_NS(125);  // 10 cycles @ 84mhz
+  }
+  return b;
+}
+
+inline uint8_t L6470_SpiTransfer_Mode_3(uint8_t b) { // using Mode 3
+  for (uint8_t bits = 8; bits--;) {
+    WRITE(L6470_CHAIN_SCK_PIN, LOW);
+    WRITE(L6470_CHAIN_MOSI_PIN, b & 0x80);
+
+    DELAY_NS(125);  // 10 cycles @ 84mhz
+    WRITE(L6470_CHAIN_SCK_PIN, HIGH);
+    DELAY_NS(125);  // Need more delay for fast CPUs
+
+    b <<= 1;        // little setup time
+    b |= (READ(L6470_CHAIN_MISO_PIN) != 0);
+  }
+  DELAY_NS(125);    // 10 cycles @ 84mhz
+  return b;
+}
+
+/**
+ * L64XX methods for SPI init and transfer
+ */
+void L64XX_Marlin::spi_init() {
+  OUT_WRITE(L6470_CHAIN_SS_PIN, HIGH);
+  OUT_WRITE(L6470_CHAIN_SCK_PIN, HIGH);
+  OUT_WRITE(L6470_CHAIN_MOSI_PIN, HIGH);
+  SET_INPUT(L6470_CHAIN_MISO_PIN);
+
+  #if PIN_EXISTS(L6470_BUSY)
+    SET_INPUT(L6470_BUSY_PIN);
+  #endif
+
+  OUT_WRITE(L6470_CHAIN_MOSI_PIN, HIGH);
+}
+
+uint8_t L64XX_Marlin::transfer_single(uint8_t data, int16_t ss_pin) {
+  // First device in chain has data sent last
+  extDigitalWrite(ss_pin, LOW);
+
+  DISABLE_ISRS(); // Disable interrupts during SPI transfer (can't allow partial command to chips)
+  const uint8_t data_out = L6470_SpiTransfer_Mode_3(data);
+  ENABLE_ISRS();  // Enable interrupts
+
+  extDigitalWrite(ss_pin, HIGH);
+  return data_out;
+}
+
+uint8_t L64XX_Marlin::transfer_chain(uint8_t data, int16_t ss_pin, uint8_t chain_position) {
+  uint8_t data_out = 0;
+
+  // first device in chain has data sent last
+  extDigitalWrite(ss_pin, LOW);
+
+  for (uint8_t i = L64XX::chain[0]; !L64xxManager.spi_abort && i >= 1; i--) {   // Send data unless aborted
+    DISABLE_ISRS();   // Disable interrupts during SPI transfer (can't allow partial command to chips)
+    const uint8_t temp = L6470_SpiTransfer_Mode_3(uint8_t(i == chain_position ? data : dSPIN_NOP));
+    ENABLE_ISRS();    // Enable interrupts
+    if (i == chain_position) data_out = temp;
+  }
+
+  extDigitalWrite(ss_pin, HIGH);
+  return data_out;
+}
+
+/**
+ * Platform-supplied L6470 buffer transfer method
+ */
+void L64XX_Marlin::transfer(uint8_t L6470_buf[], const uint8_t length) {
+  // First device in chain has its data sent last
+
+  if (spi_active) {                   // Interrupted SPI transfer so need to
+    WRITE(L6470_CHAIN_SS_PIN, HIGH);  //  guarantee min high of 650ns
+    DELAY_US(1);
+  }
+
+  WRITE(L6470_CHAIN_SS_PIN, LOW);
+  for (uint8_t i = length; i >= 1; i--)
+    L6470_SpiTransfer_Mode_3(uint8_t(L6470_buf[i]));
+  WRITE(L6470_CHAIN_SS_PIN, HIGH);
+}
+
+#pragma GCC reset_options
+
+#endif // HAS_L64XX