Initial commit

1 files changed, 99 insertions, 0 deletions

diff --git a/Marlin/src/feature/dac/stepper_dac.cpp b/Marlin/src/feature/dac/stepper_dac.cpp
new file mode 100644
index 0000000..5170a35
--- /dev/null
+++ b/Marlin/src/feature/dac/stepper_dac.cpp
@@ -0,0 +1,99 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * stepper_dac.cpp - To set stepper current via DAC
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+
+#include "stepper_dac.h"
+#include "../../MarlinCore.h" // for SP_X_LBL...
+
+bool dac_present = false;
+constexpr xyze_uint8_t dac_order = DAC_STEPPER_ORDER;
+xyze_uint_t dac_channel_pct = DAC_MOTOR_CURRENT_DEFAULT;
+
+StepperDAC stepper_dac;
+
+int StepperDAC::init() {
+  #if PIN_EXISTS(DAC_DISABLE)
+    OUT_WRITE(DAC_DISABLE_PIN, LOW);  // set pin low to enable DAC
+  #endif
+
+  mcp4728.init();
+
+  if (mcp4728.simpleCommand(RESET)) return -1;
+
+  dac_present = true;
+
+  mcp4728.setVref_all(DAC_STEPPER_VREF);
+  mcp4728.setGain_all(DAC_STEPPER_GAIN);
+
+  if (mcp4728.getDrvPct(0) < 1 || mcp4728.getDrvPct(1) < 1 || mcp4728.getDrvPct(2) < 1 || mcp4728.getDrvPct(3) < 1 ) {
+    mcp4728.setDrvPct(dac_channel_pct);
+    mcp4728.eepromWrite();
+  }
+
+  return 0;
+}
+
+void StepperDAC::set_current_value(const uint8_t channel, uint16_t val) {
+  if (!dac_present) return;
+
+  NOMORE(val, uint16_t(DAC_STEPPER_MAX));
+
+  mcp4728.analogWrite(dac_order[channel], val);
+  mcp4728.simpleCommand(UPDATE);
+}
+
+void StepperDAC::set_current_percent(const uint8_t channel, float val) {
+  set_current_value(channel, _MIN(val, 100.0f) * (DAC_STEPPER_MAX) / 100.0f);
+}
+
+static float dac_perc(int8_t n) { return mcp4728.getDrvPct(dac_order[n]); }
+static float dac_amps(int8_t n) { return mcp4728.getValue(dac_order[n]) * 0.125 * RECIPROCAL(DAC_STEPPER_SENSE * 1000); }
+
+uint8_t StepperDAC::get_current_percent(const AxisEnum axis) { return mcp4728.getDrvPct(dac_order[axis]); }
+void StepperDAC::set_current_percents(xyze_uint8_t &pct) {
+  LOOP_XYZE(i) dac_channel_pct[i] = pct[dac_order[i]];
+  mcp4728.setDrvPct(dac_channel_pct);
+}
+
+void StepperDAC::print_values() {
+  if (!dac_present) return;
+  SERIAL_ECHO_MSG("Stepper current values in % (Amps):");
+  SERIAL_ECHO_START();
+  SERIAL_ECHOPAIR_P(  SP_X_LBL, dac_perc(X_AXIS), PSTR(" ("), dac_amps(X_AXIS), PSTR(")"));
+  SERIAL_ECHOPAIR_P(  SP_Y_LBL, dac_perc(Y_AXIS), PSTR(" ("), dac_amps(Y_AXIS), PSTR(")"));
+  SERIAL_ECHOPAIR_P(  SP_Z_LBL, dac_perc(Z_AXIS), PSTR(" ("), dac_amps(Z_AXIS), PSTR(")"));
+  SERIAL_ECHOLNPAIR_P(SP_E_LBL, dac_perc(E_AXIS), PSTR(" ("), dac_amps(E_AXIS), PSTR(")"));
+}
+
+void StepperDAC::commit_eeprom() {
+  if (!dac_present) return;
+  mcp4728.eepromWrite();
+}
+
+#endif // HAS_MOTOR_CURRENT_DAC