Initial commit

1 files changed, 81 insertions, 0 deletions

diff --git a/Marlin/src/gcode/feature/controllerfan/M710.cpp b/Marlin/src/gcode/feature/controllerfan/M710.cpp
new file mode 100644
index 0000000..cc45073
--- /dev/null
+++ b/Marlin/src/gcode/feature/controllerfan/M710.cpp
@@ -0,0 +1,81 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(CONTROLLER_FAN_EDITABLE)
+
+#include "../../gcode.h"
+#include "../../../feature/controllerfan.h"
+
+void M710_report(const bool forReplay) {
+  if (!forReplay) { SERIAL_ECHOLNPGM("; Controller Fan"); SERIAL_ECHO_START(); }
+  SERIAL_ECHOLNPAIR("  M710"
+    " S", int(controllerFan.settings.active_speed),
+    " I", int(controllerFan.settings.idle_speed),
+    " A", int(controllerFan.settings.auto_mode),
+    " D", controllerFan.settings.duration,
+    " ; (", (int(controllerFan.settings.active_speed) * 100) / 255, "%"
+    " ", (int(controllerFan.settings.idle_speed) * 100) / 255, "%)"
+  );
+}
+
+/**
+ * M710: Set controller fan settings
+ *
+ *  R         : Reset to defaults
+ *  S[0-255]  : Fan speed when motors are active
+ *  I[0-255]  : Fan speed when motors are idle
+ *  A[0|1]    : Turn auto mode on or off
+ *  D         : Set auto mode idle duration
+ *
+ * Examples:
+ *   M710                   ; Report current Settings
+ *   M710 R                 ; Reset SIAD to defaults
+ *   M710 I64               ; Set controller fan Idle Speed to 25%
+ *   M710 S255              ; Set controller fan Active Speed to 100%
+ *   M710 S0                ; Set controller fan Active Speed to OFF
+ *   M710 I255 A0           ; Set controller fan Idle Speed to 100% with Auto Mode OFF
+ *   M710 I127 A1 S255 D160 ; Set controller fan idle speed 50%, AutoMode On, Fan speed 100%, duration to 160 Secs
+ */
+void GcodeSuite::M710() {
+
+  const bool seenR = parser.seen('R');
+  if (seenR) controllerFan.reset();
+
+  const bool seenS = parser.seenval('S');
+  if (seenS) controllerFan.settings.active_speed = parser.value_byte();
+
+  const bool seenI = parser.seenval('I');
+  if (seenI) controllerFan.settings.idle_speed = parser.value_byte();
+
+  const bool seenA = parser.seenval('A');
+  if (seenA) controllerFan.settings.auto_mode = parser.value_bool();
+
+  const bool seenD = parser.seenval('D');
+  if (seenD) controllerFan.settings.duration = parser.value_ushort();
+
+  if (!(seenR || seenS || seenI || seenA || seenD))
+    M710_report(false);
+}
+
+#endif // CONTROLLER_FAN_EDITABLE