Initial commit

1 files changed, 130 insertions, 0 deletions

diff --git a/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp b/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp
new file mode 100644
index 0000000..06baa4c
--- /dev/null
+++ b/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp
@@ -0,0 +1,130 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * lcd/extui/anycubic_chiron_lcd.cpp
+ *
+ * Anycubic Chiron TFT support for Marlin
+ */
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(ANYCUBIC_LCD_CHIRON)
+
+#include "ui_api.h"
+#include "lib/anycubic_chiron/chiron_tft.h"
+
+using namespace Anycubic;
+
+namespace ExtUI {
+
+  void onStartup() { Chiron.Startup(); }
+
+  void onIdle() { Chiron.IdleLoop(); }
+
+  void onPrinterKilled(PGM_P const error, PGM_P const component) {
+    Chiron.PrinterKilled(error,component);
+  }
+
+  void onMediaInserted() { Chiron.MediaEvent(AC_media_inserted); }
+  void onMediaError()    { Chiron.MediaEvent(AC_media_error);    }
+  void onMediaRemoved()  { Chiron.MediaEvent(AC_media_removed);  }
+
+  void onPlayTone(const uint16_t frequency, const uint16_t duration) {
+    #if ENABLED(SPEAKER)
+      ::tone(BEEPER_PIN, frequency, duration);
+    #endif
+  }
+
+  void onPrintTimerStarted() { Chiron.TimerEvent(AC_timer_started); }
+  void onPrintTimerPaused()  { Chiron.TimerEvent(AC_timer_paused);  }
+  void onPrintTimerStopped()                         { Chiron.TimerEvent(AC_timer_stopped); }
+  void onFilamentRunout(const extruder_t)            { Chiron.FilamentRunout();             }
+  void onUserConfirmRequired(const char * const msg) { Chiron.ConfirmationRequest(msg);     }
+  void onStatusChanged(const char * const msg)       { Chiron.StatusChange(msg);            }
+
+  void onHomingStart() {}
+  void onHomingComplete() {}
+  void onPrintFinished() {}
+
+  void onFactoryReset() {}
+
+  void onStoreSettings(char *buff) {
+    // Called when saving to EEPROM (i.e. M500). If the ExtUI needs
+    // permanent data to be stored, it can write up to eeprom_data_size bytes
+    // into buff.
+
+    // Example:
+    //  static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
+    //  memcpy(buff, &myDataStruct, sizeof(myDataStruct));
+  }
+
+  void onLoadSettings(const char *buff) {
+    // Called while loading settings from EEPROM. If the ExtUI
+    // needs to retrieve data, it should copy up to eeprom_data_size bytes
+    // from buff
+
+    // Example:
+    //  static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
+    //  memcpy(&myDataStruct, buff, sizeof(myDataStruct));
+  }
+
+  void onConfigurationStoreWritten(bool success) {
+    // Called after the entire EEPROM has been written,
+    // whether successful or not.
+  }
+
+  void onConfigurationStoreRead(bool success) {
+    // Called after the entire EEPROM has been read,
+    // whether successful or not.
+  }
+
+  #if HAS_MESH
+    void onMeshLevelingStart() {}
+
+    void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
+      // Called when any mesh points are updated
+      //SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " z:", zval);
+    }
+
+    void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {
+      // Called to indicate a special condition
+      //SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " state:", state);
+    }
+  #endif
+
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    // Called on resume from power-loss
+    void onPowerLossResume() { Chiron.PowerLossRecovery(); }
+  #endif
+
+  #if HAS_PID_HEATING
+    void onPidTuning(const result_t rst) {
+      // Called for temperature PID tuning result
+    }
+  #endif
+
+  void onSteppersDisabled() {}
+  void onSteppersEnabled()  {}
+}
+
+#endif // ANYCUBIC_LCD_CHIRON