Initial commit

1 files changed, 74 insertions, 0 deletions

diff --git a/Marlin/src/lcd/menu/menu_spindle_laser.cpp b/Marlin/src/lcd/menu/menu_spindle_laser.cpp
new file mode 100644
index 0000000..93ef224
--- /dev/null
+++ b/Marlin/src/lcd/menu/menu_spindle_laser.cpp
@@ -0,0 +1,74 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+//
+// Spindle / Laser Menu
+//
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_LCD_MENU && HAS_CUTTER
+
+  #include "menu_item.h"
+
+  #include "../../feature/spindle_laser.h"
+
+  void menu_spindle_laser() {
+    bool is_enabled = cutter.enabled() && cutter.isReady;
+    #if ENABLED(SPINDLE_CHANGE_DIR)
+      bool is_rev = cutter.is_reverse();
+    #endif
+
+    START_MENU();
+    BACK_ITEM(MSG_MAIN);
+
+    #if ENABLED(SPINDLE_LASER_PWM)
+      // Change the cutter's "current power" value without turning the cutter on or off
+      // Power is displayed and set in units and range according to CUTTER_POWER_UNIT
+      EDIT_ITEM_FAST(CUTTER_MENU_POWER_TYPE, MSG_CUTTER(POWER), &cutter.menuPower,
+        cutter.mpower_min(), cutter.mpower_max(), cutter.update_from_mpower);
+    #endif
+
+    editable.state = is_enabled;
+    EDIT_ITEM(bool, MSG_CUTTER(TOGGLE), &is_enabled, []{ if (editable.state) cutter.disable(); else cutter.enable_same_dir(); });
+
+    #if ENABLED(SPINDLE_CHANGE_DIR)
+      if (!is_enabled) {
+        editable.state = is_rev;
+        ACTION_ITEM_P(is_rev ? GET_TEXT(MSG_CUTTER(REVERSE)) : GET_TEXT(MSG_CUTTER(FORWARD)), []{ cutter.set_reverse(!editable.state); });
+      }
+    #endif
+
+    #if ENABLED(LASER_FEATURE)
+      // Setup and fire a test pulse using the current PWM power level for for a duration of test_pulse_min to test_pulse_max ms.
+      EDIT_ITEM_FAST(CUTTER_MENU_PULSE_TYPE, MSG_LASER_PULSE_MS, &cutter.testPulse, LASER_TEST_PULSE_MIN, LASER_TEST_PULSE_MAX);
+      ACTION_ITEM(MSG_LASER_FIRE_PULSE, cutter.test_fire_pulse);
+    #endif
+
+    #if BOTH(MARLIN_DEV_MODE, HAL_CAN_SET_PWM_FREQ) && defined(SPINDLE_LASER_FREQUENCY)
+      EDIT_ITEM_FAST(CUTTER_MENU_FREQUENCY_TYPE, MSG_CUTTER_FREQUENCY, &cutter.frequency, 2000, 80000, cutter.refresh_frequency);
+    #endif
+
+    END_MENU();
+  }
+
+#endif // HAS_LCD_MENU && HAS_CUTTER