Initial commit

1 files changed, 160 insertions, 0 deletions

diff --git a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h
new file mode 100644
index 0000000..70682ad
--- /dev/null
+++ b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h
@@ -0,0 +1,160 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * AZSMZ MINI pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1768)
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "AZSMZ MINI"
+
+//
+// Servos
+//
+#define SERVO0_PIN                         P1_23
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                          P1_24
+#define Y_MIN_PIN                          P1_26
+#define Z_MIN_PIN                          P1_28
+#define Z_MAX_PIN                          P1_29
+
+//
+// Steppers
+//
+#define X_STEP_PIN                         P2_00
+#define X_DIR_PIN                          P0_05
+#define X_ENABLE_PIN                       P0_04
+
+#define Y_STEP_PIN                         P2_01
+#define Y_DIR_PIN                          P0_11
+#define Y_ENABLE_PIN                       P0_10
+
+#define Z_STEP_PIN                         P2_02
+#define Z_DIR_PIN                          P0_20
+#define Z_ENABLE_PIN                       P0_19
+
+#define E0_STEP_PIN                        P2_03
+#define E0_DIR_PIN                         P0_22
+#define E0_ENABLE_PIN                      P0_21
+
+#define E1_STEP_PIN                        P2_08
+#define E1_DIR_PIN                         P2_13
+#define E1_ENABLE_PIN                      P4_29
+
+//
+// Temperature Sensors
+//  3.3V max when defined as an analog input
+//
+#define TEMP_0_PIN                      P0_23_A0  // A0 (TH1)
+#define TEMP_BED_PIN                    P0_24_A1  // A1 (TH2)
+#define TEMP_1_PIN                      P0_25_A2  // A2 (TH3)
+
+//
+// Heaters / Fans
+//
+// EFB
+#define HEATER_0_PIN                       P2_04
+#define HEATER_BED_PIN                     P2_05
+#ifndef FAN_PIN
+  #define FAN_PIN                          P2_07
+#endif
+#define FAN1_PIN                           P0_26
+
+#define LCD_SDSS                           P0_16  // LCD SD chip select
+#define ONBOARD_SD_CS_PIN                  P0_06  // Chip select for "System" SD card
+
+#if ENABLED(AZSMZ_12864)
+  #define BEEPER_PIN                       P1_30
+  #define DOGLCD_A0                        P2_06
+  #define DOGLCD_CS                        P1_22
+  #define BTN_EN1                          P4_28
+  #define BTN_EN2                          P1_27
+  #define BTN_ENC                          P3_26
+  #ifndef SDCARD_CONNECTION
+    #define SDCARD_CONNECTION                LCD
+  #endif
+#endif
+
+#if SD_CONNECTION_IS(LCD)
+  #define SD_SCK_PIN                       P0_15
+  #define SD_MISO_PIN                      P0_17
+  #define SD_MOSI_PIN                      P0_18
+  #define SD_SS_PIN                     LCD_SDSS
+  #define SD_DETECT_PIN                    P3_25
+#elif SD_CONNECTION_IS(ONBOARD)
+  #define SD_SCK_PIN                       P0_07
+  #define SD_MISO_PIN                      P0_08
+  #define SD_MOSI_PIN                      P0_09
+  #define SD_SS_PIN            ONBOARD_SD_CS_PIN
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+  #error "No custom SD drive cable defined for this board."
+#endif
+
+//
+// Ethernet pins
+//
+#define ENET_MDIO                          P1_17
+#define ENET_RX_ER                         P1_14
+#define ENET_RXD1                          P1_10
+#define ENET_MOC                           P1_16
+#define REF_CLK                            P1_15
+#define ENET_RXD0                          P1_09
+#define ENET_CRS                           P1_08
+#define ENET_TX_EN                         P1_04
+#define ENET_TXD0                          P1_00
+#define ENET_TXD1                          P1_01
+
+/**
+ *  PWMs
+ *
+ *  There are 6 PWMs.  Each PWM can be assigned to one of two pins.
+ *
+ *  SERVO2 does NOT have a PWM assigned to it.
+ *
+ *  PWM1.1   DIO4    SERVO3_PIN       FIL_RUNOUT_PIN   5V output, PWM
+ *  PWM1.1   DIO26   E0_STEP_PIN
+ *  PWM1.2   DIO11   SERVO0_PIN
+ *  PWM1.2   DIO54   X_STEP_PIN
+ *  PWM1.3   DIO6    SERVO1_PIN       J5-1
+ *  PWM1.3   DIO60   Y_STEP_PIN
+ *  PWM1.4   DIO53   SDSS(SSEL0)      J3-5  AUX-3
+ *  PWM1.4   DIO46   Z_STEP_PIN
+ *  PWM1.5   DIO3    X_MIN_PIN        10K PULLUP TO 3.3v, 1K SERIES
+ *  PWM1.5   DIO9    RAMPS_D9_PIN
+ *  PWM1.6   DIO14   Y_MIN_PIN        10K PULLUP TO 3.3v, 1K SERIES
+ *  PWM1.6   DIO10   RAMPS_D10_PIN
+ */
+
+ /**
+  * Special pins
+  *   D37 - not 5V tolerant
+  *   D49 - not 5V tolerant
+  *   D57 - open collector
+  *   D58 - open collector
+  */