Initial commit

1 files changed, 126 insertions, 0 deletions

diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
new file mode 100644
index 0000000..adf9085
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
@@ -0,0 +1,126 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Azteeg X5 GT pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+  #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME   "Azteeg X5 GT"
+#define BOARD_WEBSITE_URL "tinyurl.com/yx8tdqa3"
+
+//
+// Servos
+//
+#define SERVO0_PIN                         P1_23
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                          P1_24
+#define X_MAX_PIN                          P1_27
+#define Y_MIN_PIN                          P1_25
+#define Y_MAX_PIN                          P1_28
+#define Z_MIN_PIN                          P1_26
+#define Z_MAX_PIN                          P1_29
+
+//
+// Steppers
+//
+#define X_STEP_PIN                         P2_01
+#define X_DIR_PIN                          P0_11
+#define X_ENABLE_PIN                       P0_10
+#ifndef X_CS_PIN
+  #define X_CS_PIN                         P0_10  // BSD2660 default
+#endif
+
+#define Y_STEP_PIN                         P2_02
+#define Y_DIR_PIN                          P0_20
+#define Y_ENABLE_PIN                       P0_19
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                         P0_19  // BSD2660 default
+#endif
+
+#define Z_STEP_PIN                         P2_03
+#define Z_DIR_PIN                          P0_22
+#define Z_ENABLE_PIN                       P0_21
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                         P0_21  // BSD2660 default
+#endif
+
+#define E0_STEP_PIN                        P2_00
+#define E0_DIR_PIN                         P0_05
+#define E0_ENABLE_PIN                      P0_04
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                        P0_04  // BSD2660 default
+#endif
+
+#define E1_STEP_PIN                        P2_08
+#define E1_DIR_PIN                         P2_13
+#define E1_ENABLE_PIN                      P4_29
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                        P4_29  // BSD2660 default
+#endif
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_BED_PIN                    P0_23_A0  // A0 (TH1)
+#define TEMP_0_PIN                      P0_24_A1  // A1 (TH2)
+#define TEMP_1_PIN                      P0_25_A2  // A2 (TH3)
+
+//
+// Heaters / Fans
+//
+
+#define HEATER_BED_PIN                     P2_07
+#define HEATER_0_PIN                       P2_04
+#define HEATER_1_PIN                       P2_05
+#ifndef FAN_PIN
+  #define FAN_PIN                          P0_26
+#endif
+#define FAN1_PIN                           P1_22
+
+//
+// Display
+//
+
+#if ANY(VIKI2, miniVIKI)
+  #define BEEPER_PIN                       P1_31
+  #define DOGLCD_A0                        P2_06
+  #define DOGLCD_CS                        P0_16
+
+  #define BTN_EN1                          P3_25
+  #define BTN_EN2                          P3_26
+  #define BTN_ENC                          P2_11
+
+  #define SD_DETECT_PIN                    P1_18
+  #define SDSS                             P1_21
+
+  #define STAT_LED_RED_PIN                 P1_19
+  #define STAT_LED_BLUE_PIN                P1_20
+#endif