Initial commit

1 files changed, 160 insertions, 0 deletions

diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h
new file mode 100644
index 0000000..f80e614
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h
@@ -0,0 +1,160 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * CartesioV11 pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "CN Controls V11"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            43
+#define Y_STOP_PIN                            45
+#define Z_STOP_PIN                            42
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            34
+#define X_DIR_PIN                             36
+#define X_ENABLE_PIN                          35
+
+#define Y_STEP_PIN                            37
+#define Y_DIR_PIN                             39
+#define Y_ENABLE_PIN                          38
+
+#define Z_STEP_PIN                            40
+#define Z_DIR_PIN                             48
+#define Z_ENABLE_PIN                          41
+
+#define E0_STEP_PIN                           29
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                          3
+
+#define E1_STEP_PIN                           61
+#define E1_DIR_PIN                            62
+#define E1_ENABLE_PIN                         60
+
+#define E2_STEP_PIN                           15
+#define E2_DIR_PIN                            14
+#define E2_ENABLE_PIN                         16
+
+#define E3_STEP_PIN                           44
+#define E3_DIR_PIN                            49
+#define E3_ENABLE_PIN                         47
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             0  // Analog Input
+#define TEMP_1_PIN                             3  // Analog Input.  3 for tool2 -> 2 for chambertemp
+#define TEMP_2_PIN                             2  // Analog Input.  9 for tool3 -> 2 for chambertemp
+#define TEMP_3_PIN                            11  // Analog Input. 11 for tool4 -> 2 for chambertemp
+#define TEMP_BED_PIN                           1  // Analog Input
+
+#ifndef TEMP_CHAMBER_PIN
+  //#define TEMP_CHAMBER_PIN                   2  // Analog Input
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           5
+#define HEATER_1_PIN                          58
+#define HEATER_2_PIN                          64
+#define HEATER_3_PIN                          46
+#define HEATER_BED_PIN                         2
+
+#ifndef FAN_PIN
+  //#define FAN_PIN                            7  // common PWM pin for all tools
+#endif
+
+//
+// Auto fans
+//
+#define AUTO_FAN_PIN                           7
+#ifndef E0_AUTO_FAN_PIN
+  #define E0_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E1_AUTO_FAN_PIN
+  #define E1_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E2_AUTO_FAN_PIN
+  #define E2_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E3_AUTO_FAN_PIN
+  #define E3_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define SD_DETECT_PIN                         13
+
+// Tools
+
+//#define TOOL_0_PIN                           4
+//#define TOOL_1_PIN                          59
+//#define TOOL_2_PIN                           8
+//#define TOOL_3_PIN                          30
+//#define TOOL_PWM_PIN                         7  // common PWM pin for all tools
+
+// Common I/O
+
+//#define FIL_RUNOUT_PIN                      -1
+//#define PWM_1_PIN                           11
+//#define PWM_2_PIN                           10
+//#define SPARE_IO                            12
+
+//
+// LCD / Controller
+//
+#define BEEPER_PIN                             6
+
+// Pins for DOGM SPI LCD Support
+#define DOGLCD_A0                             26
+#define DOGLCD_CS                             24
+#define DOGLCD_MOSI                           -1  // Prevent auto-define by Conditionals_post.h
+#define DOGLCD_SCK                            -1
+
+#define BTN_EN1                               23
+#define BTN_EN2                               25
+#define BTN_ENC                               27
+
+// Hardware buttons for manual movement of XYZ
+#define SHIFT_OUT_PIN                         19
+#define SHIFT_LD_PIN                          18
+#define SHIFT_CLK_PIN                         17
+
+//#define UI1                                 31
+//#define UI2                                 22
+
+#define STAT_LED_BLUE_PIN                     -1
+#define STAT_LED_RED_PIN                      31