Initial commit

1 files changed, 113 insertions, 0 deletions

diff --git a/Marlin/src/pins/mega/pins_EINSTART-S.h b/Marlin/src/pins/mega/pins_EINSTART-S.h
new file mode 100644
index 0000000..40d65c3
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_EINSTART-S.h
@@ -0,0 +1,113 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Einstart-S pin assignments
+ * PCB Silkscreen: 3DPrinterCon_v3.5
+ */
+
+#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Einstart-S"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            44
+#define Y_STOP_PIN                            43
+#define Z_STOP_PIN                            42
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            76
+#define X_DIR_PIN                             75
+#define X_ENABLE_PIN                          73
+
+#define Y_STEP_PIN                            31
+#define Y_DIR_PIN                             32
+#define Y_ENABLE_PIN                          72
+
+#define Z_STEP_PIN                            34
+#define Z_DIR_PIN                             35
+#define Z_ENABLE_PIN                          33
+
+#define E0_STEP_PIN                           36
+#define E0_DIR_PIN                            37
+#define E0_ENABLE_PIN                         30
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             0  // Analog Input
+#define TEMP_BED_PIN                           1  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          83
+#define HEATER_BED_PIN                        38
+
+#define FAN_PIN                               82
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                                4
+
+//////////////////////////
+// LCDs and Controllers //
+//////////////////////////
+
+//
+// LCD Display output pins
+//
+
+// Requires #define U8GLIB_SH1106_EINSTART in Configuration.h
+// u8glib constructor
+// U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS);
+
+#define LCD_PINS_DC                           78
+#define LCD_PINS_RS                           79
+// DOGM SPI LCD Support
+#define DOGLCD_CS                              3
+#define DOGLCD_MOSI                            2
+#define DOGLCD_SCK                             5
+#define DOGLCD_A0                              2
+
+//
+// LCD Display input pins
+//
+#define BTN_UP                                25
+#define BTN_DWN                               26
+#define BTN_LFT                               27
+#define BTN_RT                                28
+
+// 'OK' button
+#define BTN_ENC                               29
+
+// Set Kill to right arrow, same as RIGID_PANEL
+#define KILL_PIN                              28