Initial commit

1 files changed, 144 insertions, 0 deletions

diff --git a/Marlin/src/pins/mega/pins_OVERLORD.h b/Marlin/src/pins/mega/pins_OVERLORD.h
new file mode 100644
index 0000000..18bb1f2
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_OVERLORD.h
@@ -0,0 +1,144 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Dreammaker Overlord v1.1 pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#elif HOTENDS > 2 || E_STEPPERS > 2
+  #error "Overlord Controller supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME         "OVERLORD"
+#define DEFAULT_MACHINE_NAME    BOARD_INFO_NAME
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            24
+#define Y_STOP_PIN                            28
+#define Z_MIN_PIN                             46
+#define Z_MAX_PIN                             32
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     46  // JP4, Tfeed1
+#endif
+
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define FIL_RUNOUT_PIN                      44  // JP3, Tfeed2
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            25
+#define X_DIR_PIN                             23
+#define X_ENABLE_PIN                          27
+
+#define Y_STEP_PIN                            31
+#define Y_DIR_PIN                             33
+#define Y_ENABLE_PIN                          29
+
+#define Z_STEP_PIN                            37
+#define Z_DIR_PIN                             39
+#define Z_ENABLE_PIN                          35
+
+#define E0_STEP_PIN                           43
+#define E0_DIR_PIN                            45
+#define E0_ENABLE_PIN                         41
+
+#define E1_STEP_PIN                           49
+#define E1_DIR_PIN                            47
+#define E1_ENABLE_PIN                         48
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             8  // Analog Input
+#define TEMP_1_PIN                             9  // Analog Input - Redundant temp sensor
+#define TEMP_2_PIN                            12  // Analog Input
+#define TEMP_3_PIN                            14  // Analog Input
+#define TEMP_BED_PIN                          10  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           2
+#define HEATER_1_PIN                           3
+#define HEATER_BED_PIN                         4
+
+#define FAN_PIN                                7  // material cooling fan
+
+//
+// SD Card
+//
+#define SDSS                                  53
+#define SD_DETECT_PIN                         38
+
+//
+// Misc. Functions
+//
+#define LED_PIN                               13  // On PCB status led
+#define PS_ON_PIN                             12  // For stepper/heater/fan power. Active HIGH.
+#define POWER_LOSS_PIN                        34  // Power check - whether hotends/steppers/fans have power
+
+#if ENABLED(BATTERY_STATUS_AVAILABLE)
+  #undef BATTERY_STATUS_PIN
+  #define BATTERY_STATUS_PIN                  26  // Status of power loss battery, whether it is charged (low) or charging (high)
+#endif
+#if ENABLED(INPUT_VOLTAGE_AVAILABLE)
+  #undef VOLTAGE_DETECTION_PIN
+  #define VOLTAGE_DETECTION_PIN               11  // Analog Input - ADC Voltage level of main input
+#endif
+
+//
+// LCD / Controller
+//
+#if HAS_MARLINUI_U8GLIB
+  // OVERLORD OLED pins
+  #define LCD_PINS_RS                         20
+  #define LCD_PINS_D5                         21
+  #define LCD_PINS_ENABLE                     15
+  #define LCD_PINS_D4                         14
+  #define LCD_PINS_D6                          5
+  #define LCD_PINS_D7                          6
+  #ifndef LCD_RESET_PIN
+    #define LCD_RESET_PIN                      5  // LCD_PINS_D6
+  #endif
+#endif
+
+#if IS_NEWPANEL
+  #define BTN_ENC                             16  // Enter Pin
+  #define BTN_UP                              19  // Button UP Pin
+  #define BTN_DWN                             17  // Button DOWN Pin
+#endif
+
+// Additional connectors/pins on the Overlord V1.X board
+#define PCB_VERSION_PIN                       22
+#define APPROACH_PIN                          11  // JP7, Tpd
+#define GATE_PIN                              36  // Threshold, JP6, Tg