Initial commit

1 files changed, 256 insertions, 0 deletions

diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h
new file mode 100644
index 0000000..be2317b
--- /dev/null
+++ b/Marlin/src/pins/rambo/pins_RAMBO.h
@@ -0,0 +1,256 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * IMPORTANT NOTE:
+ * Rambo users should be sure to compile Marlin using either the RAMBo
+ * board type if using the Arduino IDE - available via the link below - or
+ * the 'rambo' environment if using platformio, by specifying '-e rambo' on
+ * the command line or by changing the value of the 'env_default' variable to
+ * 'rambo' in the supplied platformio.ini.
+ *
+ * If you don't compile using the proper board type, the RAMBo's extended
+ * pins will likely be unavailable and accessories/addons may not work.
+ *
+ * Instructions for installing the Arduino RAMBo board type for the
+ * Arduino IDE are available at:
+ * https://reprap.org/wiki/Rambo_firmware
+ */
+
+/**
+ * Rambo pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Rambo"
+
+//
+// Servos
+//
+#define SERVO0_PIN                            22  // Motor header MX1
+#define SERVO1_PIN                            23  // Motor header MX2
+#define SERVO2_PIN                            24  // Motor header MX3
+#define SERVO3_PIN                             5  // PWM header pin 5
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                             12
+#define X_MAX_PIN                             24
+#define Y_MIN_PIN                             11
+#define Y_MAX_PIN                             23
+#define Z_MIN_PIN                             10
+#define Z_MAX_PIN                             30
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     30
+#endif
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                       5
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            37
+#define X_DIR_PIN                             48
+#define X_ENABLE_PIN                          29
+
+#define Y_STEP_PIN                            36
+#define Y_DIR_PIN                             49
+#define Y_ENABLE_PIN                          28
+
+#define Z_STEP_PIN                            35
+#define Z_DIR_PIN                             47
+#define Z_ENABLE_PIN                          27
+
+#define E0_STEP_PIN                           34
+#define E0_DIR_PIN                            43
+#define E0_ENABLE_PIN                         26
+
+#define E1_STEP_PIN                           33
+#define E1_DIR_PIN                            42
+#define E1_ENABLE_PIN                         25
+
+// Microstepping pins - Mapping not from fastio.h (?)
+#define X_MS1_PIN                             40
+#define X_MS2_PIN                             41
+#define Y_MS1_PIN                             69
+#define Y_MS2_PIN                             39
+#define Z_MS1_PIN                             68
+#define Z_MS2_PIN                             67
+#define E0_MS1_PIN                            65
+#define E0_MS2_PIN                            66
+#define E1_MS1_PIN                            63
+#define E1_MS2_PIN                            64
+
+#define DIGIPOTSS_PIN                         38
+#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 }        // X Y Z E0 E1 digipot channels to stepper driver mapping
+#ifndef DIGIPOT_MOTOR_CURRENT
+  #define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 }   // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             0  // Analog Input
+#define TEMP_1_PIN                             1  // Analog Input
+#define TEMP_BED_PIN                           2  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           9
+#define HEATER_1_PIN                           7
+#define HEATER_2_PIN                           6
+#define HEATER_BED_PIN                         3
+
+#ifndef FAN_PIN
+  #define FAN_PIN                              8
+#endif
+#define FAN1_PIN                               6
+#define FAN2_PIN                               2
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                               13
+#define PS_ON_PIN                              4
+
+#ifndef CASE_LIGHT_PIN
+  #define CASE_LIGHT_PIN                      46
+#endif
+
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN                         3  // Analog Input
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#define SPINDLE_LASER_PWM_PIN                 45  // Hardware PWM
+#define SPINDLE_LASER_ENA_PIN                 31  // Pullup!
+#define SPINDLE_DIR_PIN                       32
+
+//
+// SPI for Max6675 or Max31855 Thermocouple
+//
+#ifndef MAX6675_SS_PIN
+  #define MAX6675_SS_PIN                      32  // SPINDLE_DIR_PIN / STAT_LED_BLUE_PIN
+#endif
+
+//
+// M7/M8/M9 - Coolant Control
+//
+#define COOLANT_MIST_PIN                      22
+#define COOLANT_FLOOD_PIN                     44
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#define E_MUX0_PIN                            17
+#define E_MUX1_PIN                            16
+#define E_MUX2_PIN                            84  // 84 in MK2 Firmware
+
+//
+// LCD / Controller
+//
+#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL
+
+  #define KILL_PIN                            80
+
+  #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
+
+    #define LCD_PINS_RS                       70
+    #define LCD_PINS_ENABLE                   71
+    #define LCD_PINS_D4                       72
+    #define LCD_PINS_D5                       73
+    #define LCD_PINS_D6                       74
+    #define LCD_PINS_D7                       75
+
+    #if ANY(VIKI2, miniVIKI)
+      #define BEEPER_PIN                      44
+      // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the
+      //     beeper/buzzer is connected to pin 33; however, the pin used in the
+      //     diagram is actually pin 44, so this is correct.
+
+      #define DOGLCD_A0                       70
+      #define DOGLCD_CS                       71
+      #define LCD_SCREEN_ROT_180
+
+      #define BTN_EN1                         85
+      #define BTN_EN2                         84
+      #define BTN_ENC                         83
+
+      #define SD_DETECT_PIN                   -1  // Pin 72 if using easy adapter board
+
+      #define STAT_LED_RED_PIN                22
+      #define STAT_LED_BLUE_PIN               32
+
+    #else                                         // !VIKI2 && !miniVIKI
+
+      #define BEEPER_PIN                      79  // AUX-4
+
+      // AUX-2
+      #define BTN_EN1                         76
+      #define BTN_EN2                         77
+      #define BTN_ENC                         78
+
+      #define SD_DETECT_PIN                   81
+
+    #endif // !VIKI2 && !miniVIKI
+
+    #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+      #define BTN_ENC_EN             LCD_PINS_D7  // Detect the presence of the encoder
+    #endif
+
+  #else                                           // !IS_NEWPANEL - old style panel with shift register
+
+    // No Beeper added
+    #define BEEPER_PIN                        33
+
+    // Buttons attached to a shift register
+    // Not wired yet
+    //#define SHIFT_CLK_PIN                   38
+    //#define SHIFT_LD_PIN                    42
+    //#define SHIFT_OUT_PIN                   40
+    //#define SHIFT_EN_PIN                    17
+
+    #define LCD_PINS_RS                       75
+    #define LCD_PINS_ENABLE                   17
+    #define LCD_PINS_D4                       23
+    #define LCD_PINS_D5                       25
+    #define LCD_PINS_D6                       27
+    #define LCD_PINS_D7                       29
+
+  #endif // !IS_NEWPANEL
+
+#endif // HAS_WIRED_LCD