1 files changed, 93 insertions, 0 deletions
diff --git a/Marlin/src/HAL/AVR/ServoTimers.h b/Marlin/src/HAL/AVR/ServoTimers.h
new file mode 100644
index 0000000..436b281
--- /dev/null
+++ b/Marlin/src/HAL/AVR/ServoTimers.h
@@ -0,0 +1,93 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * ServoTimers.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
+ * Copyright (c) 2009 Michael Margolis.  All right reserved.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+/**
+ * Defines for 16 bit timers used with  Servo library
+ *
+ * If _useTimerX is defined then TimerX is a 16 bit timer on the current board
+ * timer16_Sequence_t enumerates the sequence that the timers should be allocated
+ * _Nbr_16timers indicates how many 16 bit timers are available.
+ */
+
+/**
+ * AVR Only definitions
+ * --------------------
+ */
+
+#define TRIM_DURATION           2   // compensation ticks to trim adjust for digitalWrite delays
+#define SERVO_TIMER_PRESCALER   8   // timer prescaler
+
+// Say which 16 bit timers can be used and in what order
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+  //#define _useTimer1
+  #define _useTimer4
+  #if NUM_SERVOS > SERVOS_PER_TIMER
+    #define _useTimer3
+    #if !HAS_MOTOR_CURRENT_PWM && SERVOS > 2 * SERVOS_PER_TIMER
+      #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
+    #endif
+  #endif
+#elif defined(__AVR_ATmega32U4__)
+  #define _useTimer3
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+  #define _useTimer3
+#elif defined(__AVR_ATmega128__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega2561__)
+  #define _useTimer3
+#else
+  // everything else
+#endif
+
+typedef enum {
+  #ifdef _useTimer1
+    _timer1,
+  #endif
+  #ifdef _useTimer3
+    _timer3,
+  #endif
+  #ifdef _useTimer4
+    _timer4,
+  #endif
+  #ifdef _useTimer5
+    _timer5,
+  #endif
+  _Nbr_16timers
+} timer16_Sequence_t;