diff options
Diffstat (limited to 'Marlin/src/HAL/LPC1768/inc/SanityCheck.h')
| -rw-r--r-- | Marlin/src/HAL/LPC1768/inc/SanityCheck.h | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h new file mode 100644 index 0000000..14890bc --- /dev/null +++ b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h @@ -0,0 +1,276 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if PIO_PLATFORM_VERSION < 1001 + #error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically." +#endif +#if PIO_FRAMEWORK_VERSION < 2006 + #error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries." +#endif + +/** + * Detect an old pins file by checking for old ADC pins values. + */ +#define _OLD_TEMP_PIN(P) PIN_EXISTS(P) && _CAT(P,_PIN) <= 7 && _CAT(P,_PIN) != 2 && _CAT(P,_PIN) != 3 +#if _OLD_TEMP_PIN(TEMP_BED) + #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_0) + #error "TEMP_0_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_1) + #error "TEMP_1_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_2) + #error "TEMP_2_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_3) + #error "TEMP_3_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_4) + #error "TEMP_4_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_5) + #error "TEMP_5_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_6) + #error "TEMP_6_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_7) + #error "TEMP_7_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#endif +#undef _OLD_TEMP_PIN + +/** + * Because PWM hardware channels all share the same frequency, along with the + * fallback software channels, FAST_PWM_FAN is incompatible with Servos. + */ +static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are incompatible with FAST_PWM_FAN on LPC176x boards."); + +#if SPINDLE_LASER_FREQUENCY + static_assert(!NUM_SERVOS, "BLTOUCH and Servos are incompatible with SPINDLE_LASER_FREQUENCY on LPC176x boards."); +#endif + +/** + * Test LPC176x-specific configuration values for errors at compile-time. + */ + +//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11) +// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector" +//#endif + +#if MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF) + #if IS_RRD_FG_SC && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI) + #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 requires TMC_USE_SW_SPI." + #endif +#endif + +static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported on LPC176x."); + +/** + * Flag any serial port conflicts + * + * Port | TX | RX | + * --- | --- | --- | + * Serial | P0_02 | P0_03 | + * Serial1 | P0_15 | P0_16 | + * Serial2 | P0_10 | P0_11 | + * Serial3 | P0_00 | P0_01 | + */ +#define ANY_TX(N,V...) DO(IS_TX##N,||,V) +#define ANY_RX(N,V...) DO(IS_RX##N,||,V) + +#if USING_SERIAL_0 + #define IS_TX0(P) (P == P0_02) + #define IS_RX0(P) (P == P0_03) + #if IS_TX0(TMC_SW_MISO) || IS_RX0(TMC_SW_MOSI) + #error "Serial port pins (0) conflict with Trinamic SPI pins!" + #elif HAS_PRUSA_MMU1 && (IS_TX0(E_MUX1_PIN) || IS_RX0(E_MUX0_PIN)) + #error "Serial port pins (0) conflict with Multi-Material-Unit multiplexer pins!" + #elif (AXIS_HAS_SPI(X) && IS_TX0(X_CS_PIN)) || (AXIS_HAS_SPI(Y) && IS_RX0(Y_CS_PIN)) + #error "Serial port pins (0) conflict with X/Y axis SPI pins!" + #endif + #undef IS_TX0 + #undef IS_RX0 +#endif + +#if USING_SERIAL_1 + #define IS_TX1(P) (P == P0_15) + #define IS_RX1(P) (P == P0_16) + #define _IS_TX1_1 IS_TX1 + #define _IS_RX1_1 IS_RX1 + #if IS_TX1(TMC_SW_SCK) + #error "Serial port pins (1) conflict with other pins!" + #elif HAS_WIRED_LCD + #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1) + #error "Serial port pins (1) conflict with Encoder Buttons!" + #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK_PIN) \ + || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN) + #error "Serial port pins (1) conflict with LCD pins!" + #endif + #endif + #undef IS_TX1 + #undef IS_RX1 + #undef _IS_TX1_1 + #undef _IS_RX1_1 +#endif + +#if USING_SERIAL_2 + #define IS_TX2(P) (P == P0_10) + #define IS_RX2(P) (P == P0_11) + #define _IS_TX2_1 IS_TX2 + #define _IS_RX2_1 IS_RX2 + #if IS_TX2(X2_ENABLE_PIN) || ANY_RX(2, X2_DIR_PIN, X2_STEP_PIN) || (AXIS_HAS_SPI(X2) && IS_TX2(X2_CS_PIN)) + #error "Serial port pins (2) conflict with X2 pins!" + #elif IS_TX2(Y2_ENABLE_PIN) || ANY_RX(2, Y2_DIR_PIN, Y2_STEP_PIN) || (AXIS_HAS_SPI(Y2) && IS_TX2(Y2_CS_PIN)) + #error "Serial port pins (2) conflict with Y2 pins!" + #elif IS_TX2(Z2_ENABLE_PIN) || ANY_RX(2, Z2_DIR_PIN, Z2_STEP_PIN) || (AXIS_HAS_SPI(Z2) && IS_TX2(Z2_CS_PIN)) + #error "Serial port pins (2) conflict with Z2 pins!" + #elif IS_TX2(Z3_ENABLE_PIN) || ANY_RX(2, Z3_DIR_PIN, Z3_STEP_PIN) || (AXIS_HAS_SPI(Z3) && IS_TX2(Z3_CS_PIN)) + #error "Serial port pins (2) conflict with Z3 pins!" + #elif IS_TX2(Z4_ENABLE_PIN) || ANY_RX(2, Z4_DIR_PIN, Z4_STEP_PIN) || (AXIS_HAS_SPI(Z4) && IS_TX2(Z4_CS_PIN)) + #error "Serial port pins (2) conflict with Z4 pins!" + #elif ANY_RX(2, X_DIR_PIN, Y_DIR_PIN) + #error "Serial port pins (2) conflict with other pins!" + #elif Y_HOME_DIR < 0 && IS_TX2(Y_STOP_PIN) + #error "Serial port pins (2) conflict with Y endstop pin!" + #elif HAS_CUSTOM_PROBE_PIN && IS_TX2(Z_MIN_PROBE_PIN) + #error "Serial port pins (2) conflict with probe pin!" + #elif ANY_TX(2, X_ENABLE_PIN, Y_ENABLE_PIN) || ANY_RX(2, X_DIR_PIN, Y_DIR_PIN) + #error "Serial port pins (2) conflict with X/Y stepper pins!" + #elif HAS_MULTI_EXTRUDER && (IS_TX2(E1_ENABLE_PIN) || (AXIS_HAS_SPI(E1) && IS_TX2(E1_CS_PIN))) + #error "Serial port pins (2) conflict with E1 stepper pins!" + #elif EXTRUDERS && ANY_RX(2, E0_DIR_PIN, E0_STEP_PIN) + #error "Serial port pins (2) conflict with E stepper pins!" + #endif + #undef IS_TX2 + #undef IS_RX2 + #undef _IS_TX2_1 + #undef _IS_RX2_1 +#endif + +#if USING_SERIAL_3 + #define PIN_IS_TX3(P) (PIN_EXISTS(P) && P##_PIN == P0_00) + #define PIN_IS_RX3(P) (P##_PIN == P0_01) + #if PIN_IS_TX3(X_MIN) || PIN_IS_RX3(X_MAX) + #error "Serial port pins (3) conflict with X endstop pins!" + #elif PIN_IS_TX3(Y_SERIAL_TX) || PIN_IS_TX3(Y_SERIAL_RX) || PIN_IS_RX3(X_SERIAL_TX) || PIN_IS_RX3(X_SERIAL_RX) + #error "Serial port pins (3) conflict with X/Y axis UART pins!" + #elif PIN_IS_TX3(X2_DIR) || PIN_IS_RX3(X2_STEP) + #error "Serial port pins (3) conflict with X2 pins!" + #elif PIN_IS_TX3(Y2_DIR) || PIN_IS_RX3(Y2_STEP) + #error "Serial port pins (3) conflict with Y2 pins!" + #elif PIN_IS_TX3(Z2_DIR) || PIN_IS_RX3(Z2_STEP) + #error "Serial port pins (3) conflict with Z2 pins!" + #elif PIN_IS_TX3(Z3_DIR) || PIN_IS_RX3(Z3_STEP) + #error "Serial port pins (3) conflict with Z3 pins!" + #elif PIN_IS_TX3(Z4_DIR) || PIN_IS_RX3(Z4_STEP) + #error "Serial port pins (3) conflict with Z4 pins!" + #elif HAS_MULTI_EXTRUDER && (PIN_IS_TX3(E1_DIR) || PIN_IS_RX3(E1_STEP)) + #error "Serial port pins (3) conflict with E1 pins!" + #endif + #undef PIN_IS_TX3 + #undef PIN_IS_RX3 +#endif + +#undef ANY_TX +#undef ANY_RX + +// +// Flag any i2c pin conflicts +// +#if ANY(HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM) + #define USEDI2CDEV_M 1 // <Arduino>/Wire.cpp + + #if USEDI2CDEV_M == 0 // P0_27 [D57] (AUX-1) .......... P0_28 [D58] (AUX-1) + #define PIN_IS_SDA0(P) (P##_PIN == P0_27) + #define IS_SCL0(P) (P == P0_28) + #if ENABLED(SDSUPPORT) && PIN_IS_SDA0(SD_DETECT) + #error "SDA0 overlaps with SD_DETECT_PIN!" + #elif PIN_IS_SDA0(E0_AUTO_FAN) + #error "SDA0 overlaps with E0_AUTO_FAN_PIN!" + #elif PIN_IS_SDA0(BEEPER) + #error "SDA0 overlaps with BEEPER_PIN!" + #elif IS_SCL0(BTN_ENC) + #error "SCL0 overlaps with Encoder Button!" + #elif IS_SCL0(SD_SS_PIN) + #error "SCL0 overlaps with SD_SS_PIN!" + #elif IS_SCL0(LCD_SDSS) + #error "SCL0 overlaps with LCD_SDSS!" + #endif + #undef PIN_IS_SDA0 + #undef IS_SCL0 + #elif USEDI2CDEV_M == 1 // P0_00 [D20] (SCA) ............ P0_01 [D21] (SCL) + #define PIN_IS_SDA1(P) (PIN_EXISTS(P) && P##_PIN == P0_00) + #define PIN_IS_SCL1(P) (P##_PIN == P0_01) + #if PIN_IS_SDA1(X_MIN) || PIN_IS_SCL1(X_MAX) + #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals." + #elif PIN_IS_SDA1(X2_DIR) || PIN_IS_SCL1(X2_STEP) + #error "One or more i2c (1) pins overlaps with X2 pins! Disable i2c peripherals." + #elif PIN_IS_SDA1(Y2_DIR) || PIN_IS_SCL1(Y2_STEP) + #error "One or more i2c (1) pins overlaps with Y2 pins! Disable i2c peripherals." + #elif PIN_IS_SDA1(Z2_DIR) || PIN_IS_SCL1(Z2_STEP) + #error "One or more i2c (1) pins overlaps with Z2 pins! Disable i2c peripherals." + #elif PIN_IS_SDA1(Z3_DIR) || PIN_IS_SCL1(Z3_STEP) + #error "One or more i2c (1) pins overlaps with Z3 pins! Disable i2c peripherals." + #elif PIN_IS_SDA1(Z4_DIR) || PIN_IS_SCL1(Z4_STEP) + #error "One or more i2c (1) pins overlaps with Z4 pins! Disable i2c peripherals." + #elif HAS_MULTI_EXTRUDER && (PIN_IS_SDA1(E1_DIR) || PIN_IS_SCL1(E1_STEP)) + #error "One or more i2c (1) pins overlaps with E1 pins! Disable i2c peripherals." + #endif + #undef PIN_IS_SDA1 + #undef PIN_IS_SCL1 + #elif USEDI2CDEV_M == 2 // P0_10 [D38] (X_ENABLE_PIN) ... P0_11 [D55] (X_DIR_PIN) + #define PIN_IS_SDA2(P) (P##_PIN == P0_10) + #define PIN_IS_SCL2(P) (P##_PIN == P0_11) + #if PIN_IS_SDA2(Y_STOP) + #error "i2c SDA2 overlaps with Y endstop pin!" + #elif HAS_CUSTOM_PROBE_PIN && PIN_IS_SDA2(Z_MIN_PROBE) + #error "i2c SDA2 overlaps with Z probe pin!" + #elif PIN_IS_SDA2(X_ENABLE) || PIN_IS_SDA2(Y_ENABLE) + #error "i2c SDA2 overlaps with X/Y ENABLE pin!" + #elif AXIS_HAS_SPI(X) && PIN_IS_SDA2(X_CS) + #error "i2c SDA2 overlaps with X CS pin!" + #elif PIN_IS_SDA2(X2_ENABLE) + #error "i2c SDA2 overlaps with X2 enable pin! Disable i2c peripherals." + #elif PIN_IS_SDA2(Y2_ENABLE) + #error "i2c SDA2 overlaps with Y2 enable pin! Disable i2c peripherals." + #elif PIN_IS_SDA2(Z2_ENABLE) + #error "i2c SDA2 overlaps with Z2 enable pin! Disable i2c peripherals." + #elif PIN_IS_SDA2(Z3_ENABLE) + #error "i2c SDA2 overlaps with Z3 enable pin! Disable i2c peripherals." + #elif PIN_IS_SDA2(Z4_ENABLE) + #error "i2c SDA2 overlaps with Z4 enable pin! Disable i2c peripherals." + #elif HAS_MULTI_EXTRUDER && PIN_IS_SDA2(E1_ENABLE) + #error "i2c SDA2 overlaps with E1 enable pin! Disable i2c peripherals." + #elif HAS_MULTI_EXTRUDER && AXIS_HAS_SPI(E1) && PIN_IS_SDA2(E1_CS) + #error "i2c SDA2 overlaps with E1 CS pin! Disable i2c peripherals." + #elif EXTRUDERS && (PIN_IS_SDA2(E0_STEP) || PIN_IS_SDA2(E0_DIR)) + #error "i2c SCL2 overlaps with E0 STEP/DIR pin! Disable i2c peripherals." + #elif PIN_IS_SDA2(X_DIR) || PIN_IS_SDA2(Y_DIR) + #error "One or more i2c pins overlaps with X/Y DIR pin! Disable i2c peripherals." + #endif + #undef PIN_IS_SDA2 + #undef PIN_IS_SCL2 + #endif + + #undef USEDI2CDEV_M +#endif + +#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) + #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform." +#elif ENABLED(SERIAL_STATS_DROPPED_RX) + #error "SERIAL_STATS_DROPPED_RX is not supported on this platform." +#endif |