1 files changed, 91 insertions, 0 deletions
diff --git a/Marlin/src/HAL/STM32/eeprom_sdcard.cpp b/Marlin/src/HAL/STM32/eeprom_sdcard.cpp
new file mode 100644
index 0000000..f811468
--- /dev/null
+++ b/Marlin/src/HAL/STM32/eeprom_sdcard.cpp
@@ -0,0 +1,91 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
+
+/**
+ * Implementation of EEPROM settings in SD Card
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDCARD_EEPROM_EMULATION)
+
+#include "../shared/eeprom_api.h"
+#include "../../sd/cardreader.h"
+
+#define EEPROM_FILENAME "eeprom.dat"
+
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
+#endif
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+
+#define _ALIGN(x) __attribute__ ((aligned(x)))
+static char _ALIGN(4) HAL_eeprom_data[MARLIN_EEPROM_SIZE];
+
+bool PersistentStore::access_start() {
+  if (!card.isMounted()) return false;
+
+  SdFile file, root = card.getroot();
+  if (!file.open(&root, EEPROM_FILENAME, O_RDONLY))
+    return true;
+
+  int bytes_read = file.read(HAL_eeprom_data, MARLIN_EEPROM_SIZE);
+  if (bytes_read < 0) return false;
+  for (; bytes_read < MARLIN_EEPROM_SIZE; bytes_read++)
+    HAL_eeprom_data[bytes_read] = 0xFF;
+  file.close();
+  return true;
+}
+
+bool PersistentStore::access_finish() {
+  if (!card.isMounted()) return false;
+
+  SdFile file, root = card.getroot();
+  int bytes_written = 0;
+  if (file.open(&root, EEPROM_FILENAME, O_CREAT | O_WRITE | O_TRUNC)) {
+    bytes_written = file.write(HAL_eeprom_data, MARLIN_EEPROM_SIZE);
+    file.close();
+  }
+  return (bytes_written == MARLIN_EEPROM_SIZE);
+}
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  for (size_t i = 0; i < size; i++)
+    HAL_eeprom_data[pos + i] = value[i];
+  crc16(crc, value, size);
+  pos += size;
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  for (size_t i = 0; i < size; i++) {
+    uint8_t c = HAL_eeprom_data[pos + i];
+    if (writing) value[i] = c;
+    crc16(crc, &c, 1);
+  }
+  pos += size;
+  return false;
+}
+
+#endif // SDCARD_EEPROM_EMULATION
+#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC