1 files changed, 89 insertions, 0 deletions
diff --git a/Marlin/src/feature/hotend_idle.cpp b/Marlin/src/feature/hotend_idle.cpp
new file mode 100644
index 0000000..7f8f20a
--- /dev/null
+++ b/Marlin/src/feature/hotend_idle.cpp
@@ -0,0 +1,89 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Hotend Idle Timeout
+ * Prevent filament in the nozzle from charring and causing a critical jam.
+ */
+
+#include "../inc/MarlinConfig.h"
+
+#if ENABLED(HOTEND_IDLE_TIMEOUT)
+
+#include "hotend_idle.h"
+#include "../gcode/gcode.h"
+
+#include "../module/temperature.h"
+#include "../module/motion.h"
+#include "../lcd/marlinui.h"
+
+extern HotendIdleProtection hotend_idle;
+
+millis_t HotendIdleProtection::next_protect_ms = 0;
+
+void HotendIdleProtection::check_hotends(const millis_t &ms) {
+  bool do_prot = false;
+  HOTEND_LOOP() {
+    if (thermalManager.degHotend(e) >= HOTEND_IDLE_MIN_TRIGGER) {
+      do_prot = true; break;
+    }
+  }
+  if (bool(next_protect_ms) != do_prot)
+    next_protect_ms = do_prot ? ms + hp_interval : 0;
+}
+
+void HotendIdleProtection::check_e_motion(const millis_t &ms) {
+  static float old_e_position = 0;
+  if (old_e_position != current_position.e) {
+    old_e_position = current_position.e;          // Track filament motion
+    if (next_protect_ms)                          // If some heater is on then...
+      next_protect_ms = ms + hp_interval;         // ...delay the timeout till later
+  }
+}
+
+void HotendIdleProtection::check() {
+  const millis_t ms = millis();                   // Shared millis
+
+  check_hotends(ms);                              // Any hotends need protection?
+  check_e_motion(ms);                             // Motion will protect them
+
+  // Hot and not moving for too long...
+  if (next_protect_ms && ELAPSED(ms, next_protect_ms))
+    timed_out();
+}
+
+// Lower (but don't raise) hotend / bed temperatures
+void HotendIdleProtection::timed_out() {
+  next_protect_ms = 0;
+  SERIAL_ECHOLNPGM("Hotend Idle Timeout");
+  LCD_MESSAGEPGM(MSG_HOTEND_IDLE_TIMEOUT);
+  HOTEND_LOOP() {
+    if ((HOTEND_IDLE_NOZZLE_TARGET) < thermalManager.degTargetHotend(e))
+      thermalManager.setTargetHotend(HOTEND_IDLE_NOZZLE_TARGET, e);
+  }
+  #if HAS_HEATED_BED
+    if ((HOTEND_IDLE_BED_TARGET) < thermalManager.degTargetBed())
+      thermalManager.setTargetBed(HOTEND_IDLE_BED_TARGET);
+  #endif
+}
+
+#endif // HOTEND_IDLE_TIMEOUT