diff options
Diffstat (limited to 'Marlin/src/gcode/control/M605.cpp')
| -rw-r--r-- | Marlin/src/gcode/control/M605.cpp | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/Marlin/src/gcode/control/M605.cpp b/Marlin/src/gcode/control/M605.cpp new file mode 100644 index 0000000..0d7a9f4 --- /dev/null +++ b/Marlin/src/gcode/control/M605.cpp @@ -0,0 +1,185 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +#include "../../inc/MarlinConfig.h" + +#if HAS_DUPLICATION_MODE + +//#define DEBUG_DXC_MODE + +#include "../gcode.h" +#include "../../module/motion.h" +#include "../../module/stepper.h" +#include "../../module/tool_change.h" +#include "../../module/planner.h" + +#define DEBUG_OUT ENABLED(DEBUG_DXC_MODE) +#include "../../core/debug_out.h" + +#if ENABLED(DUAL_X_CARRIAGE) + + /** + * M605: Set dual x-carriage movement mode + * + * M605 S0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel + * results as long as it supports dual X-carriages. + * + * M605 S1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so that + * additional slicer support is not required. + * + * M605 S2 X R : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with + * the first X-carriage and extruder, to print 2 copies of the same object at the same time. + * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and + * follow with "M605 S2" to initiate duplicated movement. For example, use "M605 S2 X100 R2" to + * make a copy 100mm to the right with E1 2° hotter than E0. + * + * M605 S3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates + * the movement of the first except the second extruder is reversed in the X axis. + * The temperature differential and initial X offset must be set with "M605 S2 X[offs] R[deg]", + * then followed by "M605 S3" to initiate mirrored movement. + * + * M605 W : IDEX What? command. + * + * Note: the X axis should be homed after changing Dual X-carriage mode. + */ + void GcodeSuite::M605() { + planner.synchronize(); + + if (parser.seen('S')) { + const DualXMode previous_mode = dual_x_carriage_mode; + + dual_x_carriage_mode = (DualXMode)parser.value_byte(); + idex_set_mirrored_mode(false); + + if (dual_x_carriage_mode == DXC_MIRRORED_MODE) { + if (previous_mode != DXC_DUPLICATION_MODE) { + SERIAL_ECHOLNPGM("Printer must be in DXC_DUPLICATION_MODE prior to "); + SERIAL_ECHOLNPGM("specifying DXC_MIRRORED_MODE."); + dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; + return; + } + idex_set_mirrored_mode(true); + float x_jog = current_position.x - .1; + for (uint8_t i = 2; --i;) { + planner.buffer_line(x_jog, current_position.y, current_position.z, current_position.e, feedrate_mm_s, 0); + x_jog += .1; + } + return; + } + + switch (dual_x_carriage_mode) { + case DXC_FULL_CONTROL_MODE: + case DXC_AUTO_PARK_MODE: + break; + case DXC_DUPLICATION_MODE: + // Set the X offset, but no less than the safety gap + if (parser.seen('X')) duplicate_extruder_x_offset = _MAX(parser.value_linear_units(), (X2_MIN_POS) - (X1_MIN_POS)); + if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff(); + // Always switch back to tool 0 + if (active_extruder != 0) tool_change(0); + break; + default: + dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; + break; + } + idex_set_parked(false); + set_duplication_enabled(false); + + #ifdef EVENT_GCODE_IDEX_AFTER_MODECHANGE + gcode.process_subcommands_now_P(PSTR(EVENT_GCODE_IDEX_AFTER_MODECHANGE)); + #endif + } + else if (!parser.seen('W')) // if no S or W parameter, the DXC mode gets reset to the user's default + dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; + + #ifdef DEBUG_DXC_MODE + + if (parser.seen('W')) { + DEBUG_ECHO_START(); + DEBUG_ECHOPGM("Dual X Carriage Mode "); + switch (dual_x_carriage_mode) { + case DXC_FULL_CONTROL_MODE: DEBUG_ECHOPGM("FULL_CONTROL"); break; + case DXC_AUTO_PARK_MODE: DEBUG_ECHOPGM("AUTO_PARK"); break; + case DXC_DUPLICATION_MODE: DEBUG_ECHOPGM("DUPLICATION"); break; + case DXC_MIRRORED_MODE: DEBUG_ECHOPGM("MIRRORED"); break; + } + DEBUG_ECHOPAIR("\nActive Ext: ", int(active_extruder)); + if (!active_extruder_parked) DEBUG_ECHOPGM(" NOT "); + DEBUG_ECHOPGM(" parked."); + DEBUG_ECHOPAIR("\nactive_extruder_x_pos: ", current_position.x); + DEBUG_ECHOPAIR("\ninactive_extruder_x: ", inactive_extruder_x); + DEBUG_ECHOPAIR("\nextruder_duplication_enabled: ", int(extruder_duplication_enabled)); + DEBUG_ECHOPAIR("\nduplicate_extruder_x_offset: ", duplicate_extruder_x_offset); + DEBUG_ECHOPAIR("\nduplicate_extruder_temp_offset: ", duplicate_extruder_temp_offset); + DEBUG_ECHOPAIR("\ndelayed_move_time: ", delayed_move_time); + DEBUG_ECHOPAIR("\nX1 Home X: ", x_home_pos(0), "\nX1_MIN_POS=", int(X1_MIN_POS), "\nX1_MAX_POS=", int(X1_MAX_POS)); + DEBUG_ECHOPAIR("\nX2 Home X: ", x_home_pos(1), "\nX2_MIN_POS=", int(X2_MIN_POS), "\nX2_MAX_POS=", int(X2_MAX_POS)); + DEBUG_ECHOPAIR("\nX2_HOME_DIR=", int(X2_HOME_DIR), "\nX2_HOME_POS=", int(X2_HOME_POS)); + DEBUG_ECHOPAIR("\nDEFAULT_DUAL_X_CARRIAGE_MODE=", STRINGIFY(DEFAULT_DUAL_X_CARRIAGE_MODE)); + DEBUG_ECHOPAIR("\toolchange_settings.z_raise=", toolchange_settings.z_raise); + DEBUG_ECHOPAIR("\nDEFAULT_DUPLICATION_X_OFFSET=", int(DEFAULT_DUPLICATION_X_OFFSET)); + DEBUG_EOL(); + + HOTEND_LOOP() { + DEBUG_ECHOPAIR_P(SP_T_STR, int(e)); + LOOP_XYZ(a) DEBUG_ECHOPAIR(" hotend_offset[", int(e), "].", XYZ_CHAR(a) | 0x20, "=", hotend_offset[e][a]); + DEBUG_EOL(); + } + DEBUG_EOL(); + } + #endif // DEBUG_DXC_MODE + } + +#elif ENABLED(MULTI_NOZZLE_DUPLICATION) + + /** + * M605: Set multi-nozzle duplication mode + * + * S2 - Enable duplication mode + * P[mask] - Bit-mask of nozzles to include in the duplication set. + * A value of 0 disables duplication. + * E[index] - Last nozzle index to include in the duplication set. + * A value of 0 disables duplication. + */ + void GcodeSuite::M605() { + bool ena = false; + if (parser.seen("EPS")) { + planner.synchronize(); + if (parser.seenval('P')) duplication_e_mask = parser.value_int(); // Set the mask directly + else if (parser.seenval('E')) duplication_e_mask = pow(2, parser.value_int() + 1) - 1; // Set the mask by E index + ena = (2 == parser.intval('S', extruder_duplication_enabled ? 2 : 0)); + set_duplication_enabled(ena && (duplication_e_mask >= 3)); + } + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(STR_DUPLICATION_MODE); + serialprint_onoff(extruder_duplication_enabled); + if (ena) { + SERIAL_ECHOPGM(" ( "); + HOTEND_LOOP() if (TEST(duplication_e_mask, e)) { SERIAL_ECHO(e); SERIAL_CHAR(' '); } + SERIAL_CHAR(')'); + } + SERIAL_EOL(); + } + +#endif // MULTI_NOZZLE_DUPLICATION + +#endif // HAS_DUPICATION_MODE |