1 files changed, 103 insertions, 0 deletions
diff --git a/Marlin/src/gcode/feature/mixing/M166.cpp b/Marlin/src/gcode/feature/mixing/M166.cpp
new file mode 100644
index 0000000..9e071a4
--- /dev/null
+++ b/Marlin/src/gcode/feature/mixing/M166.cpp
@@ -0,0 +1,103 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../../inc/MarlinConfig.h"
+
+#if ENABLED(GRADIENT_MIX)
+
+#include "../../gcode.h"
+#include "../../../module/motion.h"
+#include "../../../module/planner.h"
+#include "../../../feature/mixing.h"
+
+inline void echo_mix() {
+  SERIAL_ECHOPAIR(" (", int(mixer.mix[0]), "%|", int(mixer.mix[1]), "%)");
+}
+
+inline void echo_zt(const int t, const float &z) {
+  mixer.update_mix_from_vtool(t);
+  SERIAL_ECHOPAIR_P(SP_Z_STR, z, SP_T_STR, t);
+  echo_mix();
+}
+
+/**
+ * M166: Set a simple gradient mix for a two-component mixer
+ *       based on the Geeetech A10M implementation by Jone Liu.
+ *
+ *   S[bool]  - Enable / disable gradients
+ *   A[float] - Starting Z for the gradient
+ *   Z[float] - Ending Z for the gradient. (Must be greater than the starting Z.)
+ *   I[index] - V-Tool to use as the starting mix.
+ *   J[index] - V-Tool to use as the ending mix.
+ *
+ *   T[index] - A V-Tool index to use as an alias for the Gradient (Requires GRADIENT_VTOOL)
+ *              T with no index clears the setting. Note: This can match the I or J value.
+ *
+ * Example: M166 S1 A0 Z20 I0 J1
+ */
+void GcodeSuite::M166() {
+  if (parser.seenval('A')) mixer.gradient.start_z = parser.value_float();
+  if (parser.seenval('Z')) mixer.gradient.end_z = parser.value_float();
+  if (parser.seenval('I')) mixer.gradient.start_vtool = (uint8_t)constrain(parser.value_int(), 0, MIXING_VIRTUAL_TOOLS);
+  if (parser.seenval('J')) mixer.gradient.end_vtool = (uint8_t)constrain(parser.value_int(), 0, MIXING_VIRTUAL_TOOLS);
+
+  #if ENABLED(GRADIENT_VTOOL)
+    if (parser.seen('T')) mixer.gradient.vtool_index = parser.byteval('T', -1);
+  #endif
+
+  if (parser.seen('S')) mixer.gradient.enabled = parser.value_bool();
+
+  mixer.refresh_gradient();
+
+  SERIAL_ECHOPGM("Gradient Mix ");
+  serialprint_onoff(mixer.gradient.enabled);
+  if (mixer.gradient.enabled) {
+
+    #if ENABLED(GRADIENT_VTOOL)
+      if (mixer.gradient.vtool_index >= 0) {
+        SERIAL_ECHOPAIR(" (T", int(mixer.gradient.vtool_index));
+        SERIAL_CHAR(')');
+      }
+    #endif
+
+    SERIAL_ECHOPGM(" ; Start");
+    echo_zt(mixer.gradient.start_vtool, mixer.gradient.start_z);
+
+    SERIAL_ECHOPGM(" ; End");
+    echo_zt(mixer.gradient.end_vtool, mixer.gradient.end_z);
+
+    mixer.update_mix_from_gradient();
+
+    SERIAL_ECHOPGM(" ; Current Z");
+    #if ENABLED(DELTA)
+      get_cartesian_from_steppers();
+      SERIAL_ECHO(cartes.z);
+    #else
+      SERIAL_ECHO(planner.get_axis_position_mm(Z_AXIS));
+    #endif
+    echo_mix();
+  }
+
+  SERIAL_EOL();
+}
+
+#endif // GRADIENT_MIX