15 files changed, 840 insertions, 0 deletions
diff --git a/Marlin/src/gcode/sd/M1001.cpp b/Marlin/src/gcode/sd/M1001.cpp
new file mode 100644
index 0000000..1cf700a
--- /dev/null
+++ b/Marlin/src/gcode/sd/M1001.cpp
@@ -0,0 +1,111 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../module/printcounter.h"
+
+#if DISABLED(NO_SD_AUTOSTART)
+  #include "../../sd/cardreader.h"
+#endif
+
+#ifdef SD_FINISHED_RELEASECOMMAND
+  #include "../queue.h"
+#endif
+
+#if EITHER(LCD_SET_PROGRESS_MANUALLY, SD_REPRINT_LAST_SELECTED_FILE)
+  #include "../../lcd/marlinui.h"
+#endif
+
+#if ENABLED(POWER_LOSS_RECOVERY)
+  #include "../../feature/powerloss.h"
+#endif
+
+#if HAS_LEDS_OFF_FLAG
+  #include "../../MarlinCore.h" // for wait_for_user_response()
+  #include "../../feature/leds/printer_event_leds.h"
+#endif
+
+#if ENABLED(EXTENSIBLE_UI)
+  #include "../../lcd/extui/ui_api.h"
+#endif
+
+#if ENABLED(HOST_ACTION_COMMANDS)
+  #include "../../feature/host_actions.h"
+#endif
+
+#ifndef PE_LEDS_COMPLETED_TIME
+  #define PE_LEDS_COMPLETED_TIME (30*60)
+#endif
+
+/**
+ * M1001: Execute actions for SD print completion
+ */
+void GcodeSuite::M1001() {
+  // If there's another auto#.g file to run...
+  if (TERN(NO_SD_AUTOSTART, false, card.autofile_check())) return;
+
+  // Purge the recovery file...
+  TERN_(POWER_LOSS_RECOVERY, recovery.purge());
+
+  // Report total print time
+  const bool long_print = print_job_timer.duration() > 60;
+  if (long_print) gcode.process_subcommands_now_P(PSTR("M31"));
+
+  // Stop the print job timer
+  gcode.process_subcommands_now_P(PSTR("M77"));
+
+  // Set the progress bar "done" state
+  TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress_done());
+
+  // Announce SD file completion
+  {
+    PORT_REDIRECT(SERIAL_ALL);
+    SERIAL_ECHOLNPGM(STR_FILE_PRINTED);
+  }
+
+  // Update the status LED color
+  #if HAS_LEDS_OFF_FLAG
+    if (long_print) {
+      printerEventLEDs.onPrintCompleted();
+      TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(GET_TEXT(MSG_PRINT_DONE)));
+      TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, GET_TEXT(MSG_PRINT_DONE), CONTINUE_STR));
+      wait_for_user_response(SEC_TO_MS(TERN(HAS_LCD_MENU, PE_LEDS_COMPLETED_TIME, 30)));
+      printerEventLEDs.onResumeAfterWait();
+    }
+  #endif
+
+  // Inject SD_FINISHED_RELEASECOMMAND, if any
+  #ifdef SD_FINISHED_RELEASECOMMAND
+    gcode.process_subcommands_now_P(PSTR(SD_FINISHED_RELEASECOMMAND));
+  #endif
+
+  TERN_(EXTENSIBLE_UI, ExtUI::onPrintFinished());
+
+  // Re-select the last printed file in the UI
+  TERN_(SD_REPRINT_LAST_SELECTED_FILE, ui.reselect_last_file());
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M20.cpp b/Marlin/src/gcode/sd/M20.cpp
new file mode 100644
index 0000000..7ac4aff
--- /dev/null
+++ b/Marlin/src/gcode/sd/M20.cpp
@@ -0,0 +1,43 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+/**
+ * M20: List SD card to serial output
+ */
+void GcodeSuite::M20() {
+  if (card.flag.mounted) {
+    SERIAL_ECHOLNPGM(STR_BEGIN_FILE_LIST);
+    card.ls();
+    SERIAL_ECHOLNPGM(STR_END_FILE_LIST);
+  }
+  else
+    SERIAL_ECHO_MSG(STR_NO_MEDIA);
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M21_M22.cpp b/Marlin/src/gcode/sd/M21_M22.cpp
new file mode 100644
index 0000000..f42784d
--- /dev/null
+++ b/Marlin/src/gcode/sd/M21_M22.cpp
@@ -0,0 +1,44 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+#include "../../lcd/marlinui.h"
+
+/**
+ * M21: Init SD Card
+ */
+void GcodeSuite::M21() { card.mount(); }
+
+/**
+ * M22: Release SD Card
+ */
+void GcodeSuite::M22() {
+  if (!IS_SD_PRINTING()) card.release();
+  IF_ENABLED(TFT_COLOR_UI, ui.refresh(LCDVIEW_CALL_REDRAW_NEXT));
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M23.cpp b/Marlin/src/gcode/sd/M23.cpp
new file mode 100644
index 0000000..51bc824
--- /dev/null
+++ b/Marlin/src/gcode/sd/M23.cpp
@@ -0,0 +1,44 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+#include "../../lcd/marlinui.h"
+
+/**
+ * M23: Open a file
+ *
+ * The path is relative to the root directory
+ */
+void GcodeSuite::M23() {
+  // Simplify3D includes the size, so zero out all spaces (#7227)
+  for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
+  card.openFileRead(parser.string_arg);
+
+  TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(0));
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M24_M25.cpp b/Marlin/src/gcode/sd/M24_M25.cpp
new file mode 100644
index 0000000..611ba17
--- /dev/null
+++ b/Marlin/src/gcode/sd/M24_M25.cpp
@@ -0,0 +1,115 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+#include "../../module/printcounter.h"
+#include "../../lcd/marlinui.h"
+
+#if ENABLED(PARK_HEAD_ON_PAUSE)
+  #include "../../feature/pause.h"
+#endif
+
+#if ENABLED(HOST_ACTION_COMMANDS)
+  #include "../../feature/host_actions.h"
+#endif
+
+#if ENABLED(POWER_LOSS_RECOVERY)
+  #include "../../feature/powerloss.h"
+#endif
+
+#include "../../MarlinCore.h" // for startOrResumeJob
+
+/**
+ * M24: Start or Resume SD Print
+ */
+void GcodeSuite::M24() {
+
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    if (parser.seenval('S')) card.setIndex(parser.value_long());
+    if (parser.seenval('T')) print_job_timer.resume(parser.value_long());
+  #endif
+
+  #if ENABLED(PARK_HEAD_ON_PAUSE)
+    if (did_pause_print) {
+      resume_print(); // will call print_job_timer.start()
+      return;
+    }
+  #endif
+
+  if (card.isFileOpen()) {
+    card.startFileprint();            // SD card will now be read for commands
+    startOrResumeJob();               // Start (or resume) the print job timer
+    TERN_(POWER_LOSS_RECOVERY, recovery.prepare());
+  }
+
+  #if ENABLED(HOST_ACTION_COMMANDS)
+    #ifdef ACTION_ON_RESUME
+      host_action_resume();
+    #endif
+    TERN_(HOST_PROMPT_SUPPORT, host_prompt_open(PROMPT_INFO, PSTR("Resuming SD"), DISMISS_STR));
+  #endif
+
+  ui.reset_status();
+}
+
+/**
+ * M25: Pause SD Print
+ */
+void GcodeSuite::M25() {
+
+  #if ENABLED(PARK_HEAD_ON_PAUSE)
+
+    M125();
+
+  #else
+
+    // Set initial pause flag to prevent more commands from landing in the queue while we try to pause
+    #if ENABLED(SDSUPPORT)
+      if (IS_SD_PRINTING()) card.pauseSDPrint();
+    #endif
+
+    #if ENABLED(POWER_LOSS_RECOVERY)
+      if (recovery.enabled) recovery.save(true);
+    #endif
+
+    print_job_timer.pause();
+
+    #if DISABLED(DWIN_CREALITY_LCD)
+      ui.reset_status();
+    #endif
+
+    #if ENABLED(HOST_ACTION_COMMANDS)
+      TERN_(HOST_PROMPT_SUPPORT, host_prompt_open(PROMPT_PAUSE_RESUME, PSTR("Pause SD"), PSTR("Resume")));
+      #ifdef ACTION_ON_PAUSE
+        host_action_pause();
+      #endif
+    #endif
+
+  #endif
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M26.cpp b/Marlin/src/gcode/sd/M26.cpp
new file mode 100644
index 0000000..e0557bf
--- /dev/null
+++ b/Marlin/src/gcode/sd/M26.cpp
@@ -0,0 +1,38 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+/**
+ * M26: Set SD Card file index
+ */
+void GcodeSuite::M26() {
+  if (card.isMounted() && parser.seenval('S'))
+    card.setIndex(parser.value_long());
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M27.cpp b/Marlin/src/gcode/sd/M27.cpp
new file mode 100644
index 0000000..a76070f
--- /dev/null
+++ b/Marlin/src/gcode/sd/M27.cpp
@@ -0,0 +1,52 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+/**
+ * M27: Get SD Card status
+ *      OR, with 'S<seconds>' set the SD status auto-report interval. (Requires AUTO_REPORT_SD_STATUS)
+ *      OR, with 'C' get the current filename.
+ */
+void GcodeSuite::M27() {
+  if (parser.seen('C')) {
+    SERIAL_ECHOPGM("Current file: ");
+    card.printFilename();
+    return;
+  }
+
+  #if ENABLED(AUTO_REPORT_SD_STATUS)
+    if (parser.seenval('S')) {
+      card.auto_reporter.set_interval(parser.value_byte());
+      return;
+    }
+  #endif
+
+  card.report_status();
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M28_M29.cpp b/Marlin/src/gcode/sd/M28_M29.cpp
new file mode 100644
index 0000000..6f3f245
--- /dev/null
+++ b/Marlin/src/gcode/sd/M28_M29.cpp
@@ -0,0 +1,72 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+#if HAS_MULTI_SERIAL
+  #include "../queue.h"
+#endif
+
+/**
+ * M28: Start SD Write
+ */
+void GcodeSuite::M28() {
+
+  #if ENABLED(BINARY_FILE_TRANSFER)
+
+    bool binary_mode = false;
+    char *p = parser.string_arg;
+    if (p[0] == 'B' && NUMERIC(p[1])) {
+      binary_mode = p[1] > '0';
+      p += 2;
+      while (*p == ' ') ++p;
+    }
+
+    // Binary transfer mode
+    if ((card.flag.binary_mode = binary_mode)) {
+      SERIAL_ECHO_MSG("Switching to Binary Protocol");
+      TERN_(HAS_MULTI_SERIAL, card.transfer_port_index = queue.port[queue.index_r]);
+    }
+    else
+      card.openFileWrite(p);
+
+  #else
+
+    card.openFileWrite(parser.string_arg);
+
+  #endif
+}
+
+/**
+ * M29: Stop SD Write
+ * (Processed in write-to-file routine)
+ */
+void GcodeSuite::M29() {
+  card.flag.saving = false;
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M30.cpp b/Marlin/src/gcode/sd/M30.cpp
new file mode 100644
index 0000000..b95a895
--- /dev/null
+++ b/Marlin/src/gcode/sd/M30.cpp
@@ -0,0 +1,40 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+/**
+ * M30 <filename>: Delete SD Card file
+ */
+void GcodeSuite::M30() {
+  if (card.isMounted()) {
+    card.closefile();
+    card.removeFile(parser.string_arg);
+  }
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M32.cpp b/Marlin/src/gcode/sd/M32.cpp
new file mode 100644
index 0000000..ea893c9
--- /dev/null
+++ b/Marlin/src/gcode/sd/M32.cpp
@@ -0,0 +1,59 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_MEDIA_SUBCALLS
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+#include "../../module/planner.h" // for synchronize()
+
+#include "../../MarlinCore.h" // for startOrResumeJob
+
+/**
+ * M32: Select file and start SD Print
+ *
+ * Examples:
+ *
+ *    M32 !PATH/TO/FILE.GCO#      ; Start FILE.GCO
+ *    M32 P !PATH/TO/FILE.GCO#    ; Start FILE.GCO as a procedure
+ *    M32 S60 !PATH/TO/FILE.GCO#  ; Start FILE.GCO at byte 60
+ */
+void GcodeSuite::M32() {
+  if (IS_SD_PRINTING()) planner.synchronize();
+
+  if (card.isMounted()) {
+    const uint8_t call_procedure = parser.boolval('P');
+
+    card.openFileRead(parser.string_arg, call_procedure);
+
+    if (parser.seenval('S')) card.setIndex(parser.value_long());
+
+    card.startFileprint();
+
+    // Procedure calls count as normal print time.
+    if (!call_procedure) startOrResumeJob();
+  }
+}
+
+#endif // HAS_MEDIA_SUBCALLS
diff --git a/Marlin/src/gcode/sd/M33.cpp b/Marlin/src/gcode/sd/M33.cpp
new file mode 100644
index 0000000..b611c8b
--- /dev/null
+++ b/Marlin/src/gcode/sd/M33.cpp
@@ -0,0 +1,48 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+/**
+ * M33: Get the long full path of a file or folder
+ *
+ * Parameters:
+ *   <dospath> Case-insensitive DOS-style path to a file or folder
+ *
+ * Example:
+ *   M33 miscel~1/armchair/armcha~1.gco
+ *
+ * Output:
+ *   /Miscellaneous/Armchair/Armchair.gcode
+ */
+void GcodeSuite::M33() {
+
+  card.printLongPath(parser.string_arg);
+
+}
+
+#endif // LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/gcode/sd/M34.cpp b/Marlin/src/gcode/sd/M34.cpp
new file mode 100644
index 0000000..2dd7dc5
--- /dev/null
+++ b/Marlin/src/gcode/sd/M34.cpp
@@ -0,0 +1,42 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+/**
+ * M34: Set SD Card Sorting Options
+ */
+void GcodeSuite::M34() {
+  if (parser.seen('S')) card.setSortOn(parser.value_bool());
+  if (parser.seenval('F')) {
+    const int v = parser.value_long();
+    card.setSortFolders(v < 0 ? -1 : v > 0 ? 1 : 0);
+  }
+  //if (parser.seen('R')) card.setSortReverse(parser.value_bool());
+}
+
+#endif // SDCARD_SORT_ALPHA && SDSORT_GCODE
diff --git a/Marlin/src/gcode/sd/M524.cpp b/Marlin/src/gcode/sd/M524.cpp
new file mode 100644
index 0000000..089d2e2
--- /dev/null
+++ b/Marlin/src/gcode/sd/M524.cpp
@@ -0,0 +1,42 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+/**
+ * M524: Abort the current SD print job (started with M24)
+ */
+void GcodeSuite::M524() {
+
+  if (IS_SD_PRINTING())
+    card.flag.abort_sd_printing = true;
+  else if (card.isMounted())
+    card.closefile();
+
+}
+
+#endif // SDSUPPORT
diff --git a/Marlin/src/gcode/sd/M808.cpp b/Marlin/src/gcode/sd/M808.cpp
new file mode 100644
index 0000000..0d11b16
--- /dev/null
+++ b/Marlin/src/gcode/sd/M808.cpp
@@ -0,0 +1,51 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(GCODE_REPEAT_MARKERS)
+
+#include "../gcode.h"
+#include "../../feature/repeat.h"
+
+/**
+ * M808: Set / Goto a repeat marker
+ *
+ *  L<count> - Set a repeat marker with 'count' repetitions. If omitted, infinity.
+ *
+ * Examples:
+ *
+ *    M808 L   ; Set a loop marker with a count of infinity
+ *    M808 L2  ; Set a loop marker with a count of 2
+ *    M808     ; Decrement and loop if not zero.
+ */
+void GcodeSuite::M808() {
+
+  // Handled early and ignored here in the queue.
+  // Allowed to go into the queue for logging purposes.
+
+  // M808 K sent from the host to cancel all loops
+  if (parser.seen('K')) repeat.cancel();
+
+}
+
+#endif // GCODE_REPEAT_MARKERS
diff --git a/Marlin/src/gcode/sd/M928.cpp b/Marlin/src/gcode/sd/M928.cpp
new file mode 100644
index 0000000..03a7877
--- /dev/null
+++ b/Marlin/src/gcode/sd/M928.cpp
@@ -0,0 +1,39 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+
+/**
+ * M928: Start SD Logging
+ */
+void GcodeSuite::M928() {
+
+  card.openLogFile(parser.string_arg);
+
+}
+
+#endif // SDSUPPORT