diff options
Diffstat (limited to 'Marlin/src/inc/Conditionals_adv.h')
| -rw-r--r-- | Marlin/src/inc/Conditionals_adv.h | 549 |
1 files changed, 549 insertions, 0 deletions
diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h new file mode 100644 index 0000000..22a671c --- /dev/null +++ b/Marlin/src/inc/Conditionals_adv.h @@ -0,0 +1,549 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Conditionals_adv.h + * Defines that depend on advanced configuration. + */ + +#ifdef SWITCHING_NOZZLE_E1_SERVO_NR + #define SWITCHING_NOZZLE_TWO_SERVOS 1 +#endif + +// Determine NUM_SERVOS if none was supplied +#ifndef NUM_SERVOS + #define NUM_SERVOS 0 + #if ANY(HAS_Z_SERVO_PROBE, CHAMBER_VENT, SWITCHING_TOOLHEAD, SWITCHING_EXTRUDER, SWITCHING_NOZZLE, SPINDLE_SERVO) + #if NUM_SERVOS <= Z_PROBE_SERVO_NR + #undef NUM_SERVOS + #define NUM_SERVOS (Z_PROBE_SERVO_NR + 1) + #endif + #if NUM_SERVOS <= CHAMBER_VENT_SERVO_NR + #undef NUM_SERVOS + #define NUM_SERVOS (CHAMBER_VENT_SERVO_NR + 1) + #endif + #if NUM_SERVOS <= SWITCHING_TOOLHEAD_SERVO_NR + #undef NUM_SERVOS + #define NUM_SERVOS (SWITCHING_TOOLHEAD_SERVO_NR + 1) + #endif + #if NUM_SERVOS <= SWITCHING_NOZZLE_SERVO_NR + #undef NUM_SERVOS + #define NUM_SERVOS (SWITCHING_NOZZLE_SERVO_NR + 1) + #endif + #if NUM_SERVOS <= SWITCHING_NOZZLE_E1_SERVO_NR + #undef NUM_SERVOS + #define NUM_SERVOS (SWITCHING_NOZZLE_E1_SERVO_NR + 1) + #endif + #if NUM_SERVOS <= SWITCHING_EXTRUDER_SERVO_NR + #undef NUM_SERVOS + #define NUM_SERVOS (SWITCHING_EXTRUDER_SERVO_NR + 1) + #endif + #if NUM_SERVOS <= SWITCHING_EXTRUDER_E23_SERVO_NR + #undef NUM_SERVOS + #define NUM_SERVOS (SWITCHING_EXTRUDER_E23_SERVO_NR + 1) + #endif + #if NUM_SERVOS <= SPINDLE_SERVO_NR + #undef NUM_SERVOS + #define NUM_SERVOS (SPINDLE_SERVO_NR + 1) + #endif + #endif +#endif + +// Convenience override for a BLTouch alone +#if ENABLED(BLTOUCH) && NUM_SERVOS == 1 + #undef SERVO_DELAY + #define SERVO_DELAY { 50 } +#endif + +#if EXTRUDERS == 0 + #define NO_VOLUMETRICS + #undef TEMP_SENSOR_0 + #undef TEMP_SENSOR_1 + #undef TEMP_SENSOR_2 + #undef TEMP_SENSOR_3 + #undef TEMP_SENSOR_4 + #undef TEMP_SENSOR_5 + #undef TEMP_SENSOR_6 + #undef TEMP_SENSOR_7 + #undef FWRETRACT + #undef PIDTEMP + #undef AUTOTEMP + #undef PID_EXTRUSION_SCALING + #undef LIN_ADVANCE + #undef FILAMENT_RUNOUT_SENSOR + #undef ADVANCED_PAUSE_FEATURE + #undef FILAMENT_RUNOUT_DISTANCE_MM + #undef FILAMENT_LOAD_UNLOAD_GCODES + #undef DISABLE_INACTIVE_EXTRUDER + #undef FILAMENT_LOAD_UNLOAD_GCODES + #undef EXTRUDER_RUNOUT_PREVENT + #undef PREVENT_COLD_EXTRUSION + #undef PREVENT_LENGTHY_EXTRUDE + #undef THERMAL_PROTECTION_HOTENDS + #undef THERMAL_PROTECTION_PERIOD + #undef WATCH_TEMP_PERIOD + #undef SHOW_TEMP_ADC_VALUES +#endif + +#if TEMP_SENSOR_BED == 0 + #undef THERMAL_PROTECTION_BED + #undef THERMAL_PROTECTION_BED_PERIOD +#endif + +#if TEMP_SENSOR_CHAMBER == 0 + #undef THERMAL_PROTECTION_CHAMBER +#endif + +#if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS)) + #define HAS_MIXER_SYNC_CHANNEL 1 +#endif + +#if EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION) + #define HAS_DUPLICATION_MODE 1 +#endif + +#if ENABLED(PRINTCOUNTER) && (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0) + #define HAS_SERVICE_INTERVALS 1 +#endif + +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define HAS_FILAMENT_SENSOR 1 + #ifdef FILAMENT_RUNOUT_DISTANCE_MM + #define HAS_FILAMENT_RUNOUT_DISTANCE 1 + #endif +#endif + +// Let SD_FINISHED_RELEASECOMMAND stand in for SD_FINISHED_STEPPERRELEASE +#if ENABLED(SD_FINISHED_STEPPERRELEASE) + #ifndef SD_FINISHED_RELEASECOMMAND + #define SD_FINISHED_RELEASECOMMAND "M84" // planner.finish_and_disable() + #endif +#else + #undef SD_FINISHED_RELEASECOMMAND +#endif + +#if ENABLED(NO_SD_AUTOSTART) + #undef MENU_ADDAUTOSTART +#endif + +#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) + #define HAS_PRINT_PROGRESS 1 +#endif + +#if ENABLED(SDSUPPORT) && SD_PROCEDURE_DEPTH + #define HAS_MEDIA_SUBCALLS 1 +#endif + +#if HAS_PRINT_PROGRESS && EITHER(PRINT_PROGRESS_SHOW_DECIMALS, SHOW_REMAINING_TIME) + #define HAS_PRINT_PROGRESS_PERMYRIAD 1 +#endif + +#if ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE) + #define HAS_GAMES 1 + #if MANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE) + #define HAS_GAME_MENU 1 + #endif +#endif + +#if ANY(FWRETRACT, HAS_LEVELING, SKEW_CORRECTION) + #define HAS_POSITION_MODIFIERS 1 +#endif + +#if ANY(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_MULTI_ENDSTOPS) + #define HAS_EXTRA_ENDSTOPS 1 +#endif +#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) + #define HAS_SOFTWARE_ENDSTOPS 1 +#endif +#if ANY(EXTENSIBLE_UI, IS_NEWPANEL, EMERGENCY_PARSER, HAS_ADC_BUTTONS, DWIN_CREALITY_LCD) + #define HAS_RESUME_CONTINUE 1 +#endif + +#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) + #define HAS_COLOR_LEDS 1 +#endif +#if ALL(HAS_RESUME_CONTINUE, PRINTER_EVENT_LEDS, SDSUPPORT) + #define HAS_LEDS_OFF_FLAG 1 +#endif + +#if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) + #define HAS_MOTOR_CURRENT_I2C 1 +#endif + +#if ENABLED(Z_STEPPER_AUTO_ALIGN) + #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) + #undef Z_STEPPER_ALIGN_AMP + #endif + #ifndef Z_STEPPER_ALIGN_AMP + #define Z_STEPPER_ALIGN_AMP 1.0 + #endif +#endif + +// Multiple Z steppers +#ifndef NUM_Z_STEPPER_DRIVERS + #define NUM_Z_STEPPER_DRIVERS 1 +#endif + +// Fallback Stepper Driver types that depend on Configuration_adv.h +#if NONE(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS) + #undef X2_DRIVER_TYPE +#endif +#if DISABLED(Y_DUAL_STEPPER_DRIVERS) + #undef Y2_DRIVER_TYPE +#endif + +#if NUM_Z_STEPPER_DRIVERS < 4 + #undef Z4_DRIVER_TYPE + #undef INVERT_Z4_VS_Z_DIR + #if NUM_Z_STEPPER_DRIVERS < 3 + #undef Z3_DRIVER_TYPE + #undef INVERT_Z3_VS_Z_DIR + #if NUM_Z_STEPPER_DRIVERS < 2 + #undef Z2_DRIVER_TYPE + #undef INVERT_Z2_VS_Z_DIR + #endif + #endif +#endif + +// +// Spindle/Laser power display types +// Defined here so sanity checks can use them +// +#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) + #define HAS_CUTTER 1 + #define _CUTTER_POWER_PWM255 1 + #define _CUTTER_POWER_PERCENT 2 + #define _CUTTER_POWER_RPM 3 + #define _CUTTER_POWER(V) _CAT(_CUTTER_POWER_, V) + #define CUTTER_UNIT_IS(V) (_CUTTER_POWER(CUTTER_POWER_UNIT) == _CUTTER_POWER(V)) +#endif + +// Add features that need hardware PWM here +#if ANY(FAST_PWM_FAN, SPINDLE_LASER_PWM) + #define NEEDS_HARDWARE_PWM 1 +#endif + +#if !defined(__AVR__) || !defined(USBCON) + // Define constants and variables for buffering serial data. + // Use only 0 or powers of 2 greater than 1 + // : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...] + #ifndef RX_BUFFER_SIZE + #define RX_BUFFER_SIZE 128 + #endif + // 256 is the max TX buffer limit due to uint8_t head and tail + // : [0, 4, 8, 16, 32, 64, 128, 256] + #ifndef TX_BUFFER_SIZE + #define TX_BUFFER_SIZE 32 + #endif +#else + // SERIAL_XON_XOFF not supported on USB-native devices + #undef SERIAL_XON_XOFF +#endif + +#if ENABLED(HOST_ACTION_COMMANDS) + #ifndef ACTION_ON_PAUSE + #define ACTION_ON_PAUSE "pause" + #endif + #ifndef ACTION_ON_PAUSED + #define ACTION_ON_PAUSED "paused" + #endif + #ifndef ACTION_ON_RESUME + #define ACTION_ON_RESUME "resume" + #endif + #ifndef ACTION_ON_RESUMED + #define ACTION_ON_RESUMED "resumed" + #endif + #ifndef ACTION_ON_CANCEL + #define ACTION_ON_CANCEL "cancel" + #endif + #ifndef ACTION_ON_START + #define ACTION_ON_START "start" + #endif + #ifndef ACTION_ON_KILL + #define ACTION_ON_KILL "poweroff" + #endif + #if HAS_FILAMENT_SENSOR + #ifndef ACTION_ON_FILAMENT_RUNOUT + #define ACTION_ON_FILAMENT_RUNOUT "filament_runout" + #endif + #ifndef ACTION_REASON_ON_FILAMENT_RUNOUT + #define ACTION_REASON_ON_FILAMENT_RUNOUT "filament_runout" + #endif + #endif + #if ENABLED(G29_RETRY_AND_RECOVER) + #ifndef ACTION_ON_G29_RECOVER + #define ACTION_ON_G29_RECOVER "probe_rewipe" + #endif + #ifndef ACTION_ON_G29_FAILURE + #define ACTION_ON_G29_FAILURE "probe_failed" + #endif + #endif +#endif + +#if EITHER(FYSETC_MINI_12864_2_1, FYSETC_242_OLED_12864) + #define LED_CONTROL_MENU + #define LED_USER_PRESET_STARTUP + #define LED_COLOR_PRESETS + #ifndef LED_USER_PRESET_GREEN + #define LED_USER_PRESET_GREEN 128 + #endif + #ifndef LED_USER_PRESET_BLUE + #define LED_USER_PRESET_BLUE 0 + #endif + #ifndef LED_USER_PRESET_BRIGHTNESS + #define LED_USER_PRESET_BRIGHTNESS 255 + #endif +#endif + +// Set defaults for unspecified LED user colors +#if ENABLED(LED_CONTROL_MENU) + #ifndef LED_USER_PRESET_RED + #define LED_USER_PRESET_RED 255 + #endif + #ifndef LED_USER_PRESET_GREEN + #define LED_USER_PRESET_GREEN 255 + #endif + #ifndef LED_USER_PRESET_BLUE + #define LED_USER_PRESET_BLUE 255 + #endif + #ifndef LED_USER_PRESET_WHITE + #define LED_USER_PRESET_WHITE 0 + #endif + #ifndef LED_USER_PRESET_BRIGHTNESS + #ifdef NEOPIXEL_BRIGHTNESS + #define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS + #else + #define LED_USER_PRESET_BRIGHTNESS 255 + #endif + #endif +#endif + +#if BOTH(LED_CONTROL_MENU, NEOPIXEL2_SEPARATE) + #ifndef LED2_USER_PRESET_RED + #define LED2_USER_PRESET_RED 255 + #endif + #ifndef LED2_USER_PRESET_GREEN + #define LED2_USER_PRESET_GREEN 255 + #endif + #ifndef LED2_USER_PRESET_BLUE + #define LED2_USER_PRESET_BLUE 255 + #endif + #ifndef LED2_USER_PRESET_WHITE + #define LED2_USER_PRESET_WHITE 0 + #endif + #ifndef LED2_USER_PRESET_BRIGHTNESS + #ifdef NEOPIXEL2_BRIGHTNESS + #define LED2_USER_PRESET_BRIGHTNESS NEOPIXEL2_BRIGHTNESS + #else + #define LED2_USER_PRESET_BRIGHTNESS 255 + #endif + #endif +#endif + +// If platform requires early initialization of watchdog to properly boot +#if ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM) + #define EARLY_WATCHDOG 1 +#endif + +// Full Touch Screen needs 'tft/xpt2046' +#if EITHER(TOUCH_SCREEN, HAS_TFT_LVGL_UI) + #define HAS_TFT_XPT2046 1 +#endif + +// Touch Screen or "Touch Buttons" need XPT2046 pins +// but they use different components +#if EITHER(HAS_TFT_XPT2046, HAS_TOUCH_BUTTONS) + #define NEED_TOUCH_PINS 1 +#endif + +// Extensible UI pin mapping for RepRapDiscount +#if ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP) + #define TOUCH_UI_ULTIPANEL 1 +#endif + +// Poll-based jogging for joystick and other devices +#if ENABLED(JOYSTICK) + #define POLL_JOG +#endif + +#ifndef HOMING_BUMP_MM + #define HOMING_BUMP_MM { 0, 0, 0 } +#endif + +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && NONE(USE_OTG_USB_HOST, USE_UHS3_USB) + #define USE_UHS2_USB +#endif + +/** + * Driver Timings (in nanoseconds) + * NOTE: Driver timing order is longest-to-shortest duration. + * Preserve this ordering when adding new drivers. + */ +#ifndef MINIMUM_STEPPER_POST_DIR_DELAY + #if HAS_DRIVER(TB6560) + #define MINIMUM_STEPPER_POST_DIR_DELAY 15000 + #elif HAS_DRIVER(TB6600) + #define MINIMUM_STEPPER_POST_DIR_DELAY 1500 + #elif HAS_DRIVER(DRV8825) + #define MINIMUM_STEPPER_POST_DIR_DELAY 650 + #elif HAS_DRIVER(LV8729) + #define MINIMUM_STEPPER_POST_DIR_DELAY 500 + #elif HAS_DRIVER(A5984) + #define MINIMUM_STEPPER_POST_DIR_DELAY 400 + #elif HAS_DRIVER(A4988) + #define MINIMUM_STEPPER_POST_DIR_DELAY 200 + #elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE + #define MINIMUM_STEPPER_POST_DIR_DELAY 60 + #else + #define MINIMUM_STEPPER_POST_DIR_DELAY 0 // Expect at least 10µS since one Stepper ISR must transpire + #endif +#endif + +#ifndef MINIMUM_STEPPER_PRE_DIR_DELAY + #define MINIMUM_STEPPER_PRE_DIR_DELAY MINIMUM_STEPPER_POST_DIR_DELAY +#endif + +#ifndef MINIMUM_STEPPER_PULSE + #if HAS_DRIVER(TB6560) + #define MINIMUM_STEPPER_PULSE 30 + #elif HAS_DRIVER(TB6600) + #define MINIMUM_STEPPER_PULSE 3 + #elif HAS_DRIVER(DRV8825) + #define MINIMUM_STEPPER_PULSE 2 + #elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984) + #define MINIMUM_STEPPER_PULSE 1 + #elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE + #define MINIMUM_STEPPER_PULSE 0 + #elif HAS_DRIVER(LV8729) + #define MINIMUM_STEPPER_PULSE 0 + #else + #define MINIMUM_STEPPER_PULSE 2 + #endif +#endif + +#ifndef MAXIMUM_STEPPER_RATE + #if HAS_DRIVER(TB6560) + #define MAXIMUM_STEPPER_RATE 15000 + #elif HAS_DRIVER(TB6600) + #define MAXIMUM_STEPPER_RATE 150000 + #elif HAS_DRIVER(DRV8825) + #define MAXIMUM_STEPPER_RATE 250000 + #elif HAS_DRIVER(A4988) + #define MAXIMUM_STEPPER_RATE 500000 + #elif HAS_DRIVER(LV8729) + #define MAXIMUM_STEPPER_RATE 1000000 + #elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE + #define MAXIMUM_STEPPER_RATE 5000000 + #else + #define MAXIMUM_STEPPER_RATE 250000 + #endif +#endif + +#if ENABLED(DIRECT_STEPPING) + #ifndef STEPPER_PAGES + #define STEPPER_PAGES 16 + #endif + #ifndef STEPPER_PAGE_FORMAT + #define STEPPER_PAGE_FORMAT SP_4x2_256 + #endif + #ifndef PAGE_MANAGER + #define PAGE_MANAGER SerialPageManager + #endif +#endif + +// +// SD Card connection methods +// Defined here so pins and sanity checks can use them +// +#if ENABLED(SDSUPPORT) + #define _SDCARD_LCD 1 + #define _SDCARD_ONBOARD 2 + #define _SDCARD_CUSTOM_CABLE 3 + #define _SDCARD_ID(V) _CAT(_SDCARD_, V) + #define SD_CONNECTION_IS(V) (_SDCARD_ID(SDCARD_CONNECTION) == _SDCARD_ID(V)) +#else + #define SD_CONNECTION_IS(...) 0 +#endif + +// Power Monitor sensors +#if EITHER(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) + #define HAS_POWER_MONITOR 1 +#endif +#if ENABLED(POWER_MONITOR_CURRENT) && defined(POWER_MONITOR_FIXED_VOLTAGE) + #define HAS_POWER_MONITOR_VREF 1 +#endif +#if BOTH(HAS_POWER_MONITOR_VREF, POWER_MONITOR_CURRENT) + #define HAS_POWER_MONITOR_WATTS 1 +#endif + +// Flag if an EEPROM type is pre-selected +#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM, QSPI_EEPROM, FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION, SDCARD_EEPROM_EMULATION) + #define NO_EEPROM_SELECTED 1 +#endif + +// Flag whether hex_print.cpp is used +#if ANY(AUTO_BED_LEVELING_UBL, M100_FREE_MEMORY_WATCHER, DEBUG_GCODE_PARSER, TMC_DEBUG, MARLIN_DEV_MODE) + #define NEED_HEX_PRINT 1 +#endif + +// Flag whether least_squares_fit.cpp is used +#if ANY(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_LINEAR, Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) + #define NEED_LSF 1 +#endif + +// Flag the indexed serial ports that are in use +#define ANY_SERIAL_IS(N) (defined(SERIAL_PORT) && SERIAL_PORT == (N)) || \ + (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == (N)) || \ + (defined(MMU2_SERIAL_PORT) && MMU2_SERIAL_PORT == (N)) || \ + (defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT == (N)) +#if ANY_SERIAL_IS(-1) + #define USING_SERIAL_DEFAULT +#endif +#if ANY_SERIAL_IS(0) + #define USING_SERIAL_0 1 +#endif +#if ANY_SERIAL_IS(1) + #define USING_SERIAL_1 1 +#endif +#if ANY_SERIAL_IS(2) + #define USING_SERIAL_2 1 +#endif +#if ANY_SERIAL_IS(3) + #define USING_SERIAL_3 1 +#endif +#if ANY_SERIAL_IS(4) + #define USING_SERIAL_4 1 +#endif +#if ANY_SERIAL_IS(5) + #define USING_SERIAL_5 1 +#endif +#if ANY_SERIAL_IS(6) + #define USING_SERIAL_6 1 +#endif +#if ANY_SERIAL_IS(7) + #define USING_SERIAL_7 1 +#endif +#if ANY_SERIAL_IS(8) + #define USING_SERIAL_8 1 +#endif +#undef ANY_SERIAL_IS |