1 files changed, 117 insertions, 0 deletions
diff --git a/Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp b/Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp
new file mode 100644
index 0000000..e2bd960
--- /dev/null
+++ b/Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp
@@ -0,0 +1,117 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * anycubic_i3mega_lcd.cpp
+ */
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(ANYCUBIC_LCD_I3MEGA)
+
+#include "lib/anycubic_i3mega/anycubic_i3mega_lcd.h"
+#include "ui_api.h"
+
+#include <Arduino.h>    // for the ::tone() call
+
+namespace ExtUI {
+
+  void onStartup()        { AnycubicTFT.OnSetup(); }
+  void onIdle()           { AnycubicTFT.OnCommandScan(); }
+  void onPrinterKilled(PGM_P const error, PGM_P const component) { AnycubicTFT.OnKillTFT(); }
+  void onMediaInserted()  { AnycubicTFT.OnSDCardStateChange(true); }
+  void onMediaError()     { AnycubicTFT.OnSDCardError(); }
+  void onMediaRemoved()   { AnycubicTFT.OnSDCardStateChange(false); }
+  void onPlayTone(const uint16_t frequency, const uint16_t duration) {
+    #if ENABLED(SPEAKER)
+      ::tone(BEEPER_PIN, frequency, duration);
+    #endif
+  }
+  void onPrintTimerStarted()  { AnycubicTFT.OnPrintTimerStarted(); }
+  void onPrintTimerPaused()   { AnycubicTFT.OnPrintTimerPaused(); }
+  void onPrintTimerStopped()  { AnycubicTFT.OnPrintTimerStopped(); }
+  void onFilamentRunout(const extruder_t extruder)   { AnycubicTFT.OnFilamentRunout(); }
+  void onUserConfirmRequired(const char * const msg) { AnycubicTFT.OnUserConfirmRequired(msg); }
+  void onStatusChanged(const char * const msg) {}
+
+  void onHomingStart() {}
+  void onHomingComplete() {}
+  void onPrintFinished() {}
+
+  void onFactoryReset() {}
+
+  void onStoreSettings(char *buff) {
+    // Called when saving to EEPROM (i.e. M500). If the ExtUI needs
+    // permanent data to be stored, it can write up to eeprom_data_size bytes
+    // into buff.
+
+    // Example:
+    //  static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
+    //  memcpy(buff, &myDataStruct, sizeof(myDataStruct));
+  }
+
+  void onLoadSettings(const char *buff) {
+    // Called while loading settings from EEPROM. If the ExtUI
+    // needs to retrieve data, it should copy up to eeprom_data_size bytes
+    // from buff
+
+    // Example:
+    //  static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
+    //  memcpy(&myDataStruct, buff, sizeof(myDataStruct));
+  }
+
+  void onConfigurationStoreWritten(bool success) {
+    // Called after the entire EEPROM has been written,
+    // whether successful or not.
+  }
+
+  void onConfigurationStoreRead(bool success) {
+    // Called after the entire EEPROM has been read,
+    // whether successful or not.
+  }
+
+  #if HAS_MESH
+
+    void onMeshLevelingStart() {}
+
+    void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
+      // Called when any mesh points are updated
+    }
+  #endif
+
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    void onPowerLossResume() {
+      // Called on resume from power-loss
+    }
+  #endif
+
+  #if HAS_PID_HEATING
+    void onPidTuning(const result_t rst) {
+      // Called for temperature PID tuning result
+    }
+  #endif
+
+  void onSteppersDisabled() {}
+  void onSteppersEnabled()  {}
+}
+
+#endif // ANYCUBIC_LCD_I3MEGA