1 files changed, 125 insertions, 0 deletions
diff --git a/Marlin/src/lcd/extui/example.cpp b/Marlin/src/lcd/extui/example.cpp
new file mode 100644
index 0000000..dd4b331
--- /dev/null
+++ b/Marlin/src/lcd/extui/example.cpp
@@ -0,0 +1,125 @@
+/*********************
+ * example.cpp *
+ *********************/
+
+/****************************************************************************
+ *   Written By Marcio Teixeira 2018 - Aleph Objects, Inc.                  *
+ *                                                                          *
+ *   This program is free software: you can redistribute it and/or modify   *
+ *   it under the terms of the GNU General Public License as published by   *
+ *   the Free Software Foundation, either version 3 of the License, or      *
+ *   (at your option) any later version.                                    *
+ *                                                                          *
+ *   This program is distributed in the hope that it will be useful,        *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of         *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the          *
+ *   GNU General Public License for more details.                           *
+ *                                                                          *
+ *   To view a copy of the GNU General Public License, go to the following  *
+ *   location: <https://www.gnu.org/licenses/>.                             *
+ ****************************************************************************/
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if BOTH(EXTUI_EXAMPLE, EXTENSIBLE_UI)
+
+#include "ui_api.h"
+
+// To implement a new UI, complete the functions below and
+// read or update Marlin's state using the methods in the
+// ExtUI methods in "../ui_api.h"
+//
+// Although it may be possible to access other state
+// variables from Marlin, using the API here possibly
+// helps ensure future compatibility.
+
+namespace ExtUI {
+  void onStartup() {
+    /* Initialize the display module here. The following
+     * routines are available for access to the GPIO pins:
+     *
+     *   SET_OUTPUT(pin)
+     *   SET_INPUT_PULLUP(pin)
+     *   SET_INPUT(pin)
+     *   WRITE(pin,value)
+     *   READ(pin)
+     */
+  }
+  void onIdle() {}
+  void onPrinterKilled(PGM_P const error, PGM_P const component) {}
+  void onMediaInserted() {}
+  void onMediaError() {}
+  void onMediaRemoved() {}
+  void onPlayTone(const uint16_t frequency, const uint16_t duration) {}
+  void onPrintTimerStarted() {}
+  void onPrintTimerPaused() {}
+  void onPrintTimerStopped() {}
+  void onFilamentRunout(const extruder_t extruder) {}
+  void onUserConfirmRequired(const char * const msg) {}
+  void onStatusChanged(const char * const msg) {}
+
+  void onHomingStart() {}
+  void onHomingComplete() {}
+  void onPrintFinished() {}
+
+  void onFactoryReset() {}
+
+  void onStoreSettings(char *buff) {
+    // Called when saving to EEPROM (i.e. M500). If the ExtUI needs
+    // permanent data to be stored, it can write up to eeprom_data_size bytes
+    // into buff.
+
+    // Example:
+    //  static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
+    //  memcpy(buff, &myDataStruct, sizeof(myDataStruct));
+  }
+
+  void onLoadSettings(const char *buff) {
+    // Called while loading settings from EEPROM. If the ExtUI
+    // needs to retrieve data, it should copy up to eeprom_data_size bytes
+    // from buff
+
+    // Example:
+    //  static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
+    //  memcpy(&myDataStruct, buff, sizeof(myDataStruct));
+  }
+
+  void onConfigurationStoreWritten(bool success) {
+    // Called after the entire EEPROM has been written,
+    // whether successful or not.
+  }
+
+  void onConfigurationStoreRead(bool success) {
+    // Called after the entire EEPROM has been read,
+    // whether successful or not.
+  }
+
+  #if HAS_MESH
+    void onMeshLevelingStart() {}
+
+    void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
+      // Called when any mesh points are updated
+    }
+
+    void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {
+      // Called to indicate a special condition
+    }
+  #endif
+
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    void onPowerLossResume() {
+      // Called on resume from power-loss
+    }
+  #endif
+
+  #if HAS_PID_HEATING
+    void onPidTuning(const result_t rst) {
+      // Called for temperature PID tuning result
+    }
+  #endif
+
+  void onSteppersDisabled() {}
+  void onSteppersEnabled()  {}
+}
+
+#endif // EXTUI_EXAMPLE && EXTENSIBLE_UI