diff options
Diffstat (limited to 'Marlin/src/lcd/language/language_nl.h')
| -rw-r--r-- | Marlin/src/lcd/language/language_nl.h | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h new file mode 100644 index 0000000..82e5c29 --- /dev/null +++ b/Marlin/src/lcd/language/language_nl.h @@ -0,0 +1,231 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Dutch + * + * LCD Menu Messages + * See also https://marlinfw.org/docs/development/lcd_language.html + */ + +#define DISPLAY_CHARSET_ISO10646_1 +#define NOT_EXTENDED_ISO10646_1_5X7 + +namespace Language_nl { + using namespace Language_en; // Inherit undefined strings from English + + constexpr uint8_t CHARSIZE = 1; + PROGMEM Language_Str LANGUAGE = _UxGT("Dutch"); + + PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" gereed."); + PROGMEM Language_Str MSG_BACK = _UxGT("Terug"); + PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Kaart ingestoken"); + PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Kaart verwijderd"); + PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("Endstops"); // Max length 8 characters + PROGMEM Language_Str MSG_MAIN = _UxGT("Hoofdmenu"); + PROGMEM Language_Str MSG_RUN_AUTO_FILES = _UxGT("Autostart"); + PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("Motoren uit"); + PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("Debug Menu"); // accepted English terms + PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("Vooruitgang Test"); + + PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Klik voor begin"); + PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("Volgende Plaats"); + PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Bed level kompl."); + PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Zet home offsets"); + PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("H offset toegep."); + PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Nulpunt instellen"); + #if PREHEAT_COUNT + PROGMEM Language_Str MSG_PREHEAT_1 = PREHEAT_1_LABEL _UxGT(" voorverwarmen"); + PROGMEM Language_Str MSG_PREHEAT_1_H = PREHEAT_1_LABEL _UxGT(" voorverw. ~"); + PROGMEM Language_Str MSG_PREHEAT_1_END = PREHEAT_1_LABEL _UxGT(" voorverw. Einde"); + PROGMEM Language_Str MSG_PREHEAT_1_END_E = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ~"); + PROGMEM Language_Str MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" voorverw. aan"); + PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" voorverw. Bed"); + PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" verw. conf"); + + PROGMEM Language_Str MSG_PREHEAT_M = _UxGT("$ voorverwarmen"); + PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT("$ voorverw. ~"); + PROGMEM Language_Str MSG_PREHEAT_M_END = _UxGT("$ voorverw. Einde"); + PROGMEM Language_Str MSG_PREHEAT_M_END_E = _UxGT("$ voorverw. Einde ~"); + PROGMEM Language_Str MSG_PREHEAT_M_ALL = _UxGT("$ voorverw. aan"); + PROGMEM Language_Str MSG_PREHEAT_M_BEDONLY = _UxGT("$ voorverw. Bed"); + PROGMEM Language_Str MSG_PREHEAT_M_SETTINGS = _UxGT("$ verw. conf"); + #endif + PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Afkoelen"); + PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("Stroom aan"); + PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("Stroom uit"); + PROGMEM Language_Str MSG_EXTRUDE = _UxGT("Extrude"); + PROGMEM Language_Str MSG_RETRACT = _UxGT("Retract"); + PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("As verplaatsen"); + PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Bed Leveling"); + PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Level bed"); + + PROGMEM Language_Str MSG_MOVING = _UxGT("Verplaatsen..."); + PROGMEM Language_Str MSG_FREE_XY = _UxGT("Vrij XY"); + PROGMEM Language_Str MSG_MOVE_X = _UxGT("Verplaats X"); + PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Verplaats Y"); + PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Verplaats Z"); + PROGMEM Language_Str MSG_MOVE_E = _UxGT("Extruder"); + PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Extruder *"); + PROGMEM Language_Str MSG_MOVE_N_MM = _UxGT("Verplaats %smm"); + PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Verplaats 0.1mm"); + PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Verplaats 1mm"); + PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Verplaats 10mm"); + PROGMEM Language_Str MSG_SPEED = _UxGT("Snelheid"); + PROGMEM Language_Str MSG_BED_Z = _UxGT("Bed Z"); + PROGMEM Language_Str MSG_NOZZLE = _UxGT("Nozzle"); + PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozzle ~"); + PROGMEM Language_Str MSG_BED = _UxGT("Bed"); + PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan snelheid"); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan snelheid ~"); + PROGMEM Language_Str MSG_FLOW = _UxGT("Flow"); + PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flow ~"); + PROGMEM Language_Str MSG_CONTROL = _UxGT("Control"); + PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min"); + PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max"); + PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Fact"); + PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Autotemp"); + PROGMEM Language_Str MSG_LCD_ON = _UxGT("Aan"); + PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Uit"); + PROGMEM Language_Str MSG_SELECT = _UxGT("Selecteer"); + PROGMEM Language_Str MSG_SELECT_E = _UxGT("Selecteer *"); + PROGMEM Language_Str MSG_ACC = _UxGT("Versn"); + PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatuur"); + PROGMEM Language_Str MSG_MOTION = _UxGT("Beweging"); + PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament"); + PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K"); // accepted english dutch + PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *"); // accepted english dutch + PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm") SUPERSCRIPT_THREE; + PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Fil. Dia."); + PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *"); + PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD contrast"); + PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Geheugen opslaan"); + PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Geheugen laden"); + PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("Noodstop reset"); + PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Ververs"); + PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("Info scherm"); + PROGMEM Language_Str MSG_PREPARE = _UxGT("Voorbereiden"); + PROGMEM Language_Str MSG_TUNE = _UxGT("Afstellen"); + PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Print pauzeren"); + PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Print hervatten"); + PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Print stoppen"); + PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Print van SD"); + PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("Geen SD kaart"); + PROGMEM Language_Str MSG_DWELL = _UxGT("Slapen..."); + PROGMEM Language_Str MSG_USERWAIT = _UxGT("Wachten..."); + PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Print afgebroken"); + PROGMEM Language_Str MSG_NO_MOVE = _UxGT("Geen beweging."); + PROGMEM Language_Str MSG_KILLED = _UxGT("Afgebroken. "); + PROGMEM Language_Str MSG_STOPPED = _UxGT("Gestopt. "); + PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("Retract mm"); // accepted English term in Dutch + PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("Ruil Retract mm"); + PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("Retract F"); + PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("Unretr. mm"); + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Ruil Unretr. mm"); + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Unretr. FR"); + PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("Auto-Retract"); + PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Verv. Filament"); + PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Verv. Filament *"); + PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("Init. SD kaart"); + PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Verv. SD Kaart"); + PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z probe uit. bed"); + PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Zelf-Test"); + PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch"); + PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Home %s%s%s Eerst"); + PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Z Offset"); // accepted English term in Dutch + PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("Babystap X"); + PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("Babystap Y"); + PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("Babystap Z"); + PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("Endstop afbr."); + PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Voorverw. fout"); + PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("Redun. temp fout"); + PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Therm. wegloop"); + PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: Max. temp"); + PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: Min. temp"); + PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER GESTOPT"); + PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset A.U.B."); + PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only. Keep English standard + PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("h"); // One character only + PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("m"); // One character only + PROGMEM Language_Str MSG_HEATING = _UxGT("Voorwarmen..."); + PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Bed voorverw..."); + PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Delta Calibratie"); + PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Kalibreer X"); + PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibreer Y"); + PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibreer Z"); + PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibreer Midden"); + PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("Auto Calibratie"); + PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("Zet Delta Hoogte"); + + PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("Case licht"); + + PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER = _UxGT("Onjuiste printer"); + + #if LCD_WIDTH >= 20 + PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Printed Aantal"); + PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Totaal Voltooid"); + PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Totale Printtijd"); + PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Langste Printtijd"); + PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Totaal Extrudeert"); + #else + PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Aantal"); + PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Voltooid"); + PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Printtijd "); + PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Langste"); + PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Extrud."); + #endif + + PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("Min Temp"); + PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); + PROGMEM Language_Str MSG_INFO_PSU = _UxGT("PSU"); // accepted English term in Dutch + + PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Motorstroom"); + + PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC Opslaan"); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Hervat print"); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Nozzle: "); // accepted English term + // + // Filament Change screens show up to 3 lines on a 4-line display + // ...or up to 2 lines on a 3-line display + // + #if LCD_HEIGHT >= 4 + // Up to 3 lines + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Wacht voor start", "filament te", "verwisselen")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_3_LINE("Wacht voor", "filament uit", "te laden")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Klik knop om...", "verw. nozzle.")); //nozzle accepted English term + PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Nozzle verw.", "Wacht a.u.b.")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Laad filament", "en druk knop", "om verder...")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_3_LINE("Wacht voor", "filament te", "laden")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_3_LINE("Wacht voor print", "om verder", "te gaan")); + #else + // Up to 2 lines + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("Wacht voor", "start...")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Wacht voor", "uitladen...")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Klik knop om...", "verw. nozzle.")); //nozzle accepted English term + PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Verwarmen...")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("Laad filament", "en druk knop")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Wacht voor", "inladen...")); + PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Wacht voor", "printing...")); + #endif +} |