diff options
Diffstat (limited to 'Marlin/src/lcd/menu/menu_temperature.cpp')
| -rw-r--r-- | Marlin/src/lcd/menu/menu_temperature.cpp | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/Marlin/src/lcd/menu/menu_temperature.cpp b/Marlin/src/lcd/menu/menu_temperature.cpp new file mode 100644 index 0000000..01c1f8f --- /dev/null +++ b/Marlin/src/lcd/menu/menu_temperature.cpp @@ -0,0 +1,252 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +// +// Temperature Menu +// + +#include "../../inc/MarlinConfig.h" + +#if HAS_LCD_MENU && HAS_TEMPERATURE + +#include "menu_item.h" +#include "../../module/temperature.h" + +#if HAS_FAN || ENABLED(SINGLENOZZLE) + #include "../../module/motion.h" +#endif + +#if ENABLED(SINGLENOZZLE_STANDBY_TEMP) + #include "../../module/tool_change.h" +#endif + +// +// "Temperature" submenu items +// + +void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb) { + UNUSED(e); UNUSED(indh); UNUSED(indb); + #if HAS_HOTEND + if (indh >= 0 && ui.material_preset[indh].hotend_temp > 0) + setTargetHotend(_MIN(thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT, ui.material_preset[indh].hotend_temp), e); + #endif + #if HAS_HEATED_BED + if (indb >= 0 && ui.material_preset[indb].bed_temp > 0) setTargetBed(ui.material_preset[indb].bed_temp); + #endif + #if HAS_FAN + if (indh >= 0) + set_fan_speed(active_extruder < (FAN_COUNT) ? active_extruder : 0, ui.material_preset[indh].fan_speed); + #endif + ui.return_to_status(); +} + +#if PREHEAT_COUNT + + #if HAS_TEMP_HOTEND + inline void _preheat_end(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, -1); } + void do_preheat_end_m() { _preheat_end(editable.int8, 0); } + #endif + #if HAS_HEATED_BED + inline void _preheat_bed(const uint8_t m) { thermalManager.lcd_preheat(-1, -1, m); } + #endif + + #if HAS_TEMP_HOTEND && HAS_HEATED_BED + inline void _preheat_both(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, m); } + + // Indexed "Preheat ABC" and "Heat Bed" items + #define PREHEAT_ITEMS(M,E) do{ \ + ACTION_ITEM_N_S(E, ui.get_preheat_label(M), MSG_PREHEAT_M_H, []{ _preheat_both(M, MenuItemBase::itemIndex); }); \ + ACTION_ITEM_N_S(E, ui.get_preheat_label(M), MSG_PREHEAT_M_END_E, []{ _preheat_end(M, MenuItemBase::itemIndex); }); \ + }while(0) + + #elif HAS_MULTI_HOTEND + + // No heated bed, so just indexed "Preheat ABC" items + #define PREHEAT_ITEMS(M,E) ACTION_ITEM_N_S(E, ui.get_preheat_label(M), MSG_PREHEAT_M_H, []{ _preheat_end(M, MenuItemBase::itemIndex); }) + + #endif + + #if HAS_MULTI_HOTEND || HAS_HEATED_BED + + // Set editable.int8 to the Material index before entering this menu + // because MenuItemBase::itemIndex will be re-used by PREHEAT_ITEMS + void menu_preheat_m() { + const uint8_t m = editable.int8; // Don't re-use 'editable' in this menu + + START_MENU(); + BACK_ITEM(MSG_TEMPERATURE); + + #if HOTENDS == 1 + + #if HAS_HEATED_BED + ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M, []{ _preheat_both(editable.int8, 0); }); + ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M_END, do_preheat_end_m); + #else + ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M, do_preheat_end_m); + #endif + + #elif HAS_MULTI_HOTEND + + HOTEND_LOOP() PREHEAT_ITEMS(editable.int8, e); + ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M_ALL, []() { + HOTEND_LOOP() thermalManager.setTargetHotend(ui.material_preset[editable.int8].hotend_temp, e); + TERN(HAS_HEATED_BED, _preheat_bed(editable.int8), ui.return_to_status()); + }); + + #endif + + #if HAS_HEATED_BED + ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M_BEDONLY, []{ _preheat_bed(editable.int8); }); + #endif + + END_MENU(); + } + + #endif // HAS_MULTI_HOTEND || HAS_HEATED_BED + +#endif // PREHEAT_COUNT + +#if HAS_TEMP_HOTEND || HAS_HEATED_BED + + void lcd_cooldown() { + thermalManager.zero_fan_speeds(); + thermalManager.disable_all_heaters(); + ui.return_to_status(); + } + +#endif // HAS_TEMP_HOTEND || HAS_HEATED_BED + +void menu_temperature() { + #if HAS_TEMP_HOTEND || HAS_HEATED_BED + bool has_heat = false; + #if HAS_TEMP_HOTEND + HOTEND_LOOP() if (thermalManager.temp_hotend[HOTEND_INDEX].target) { has_heat = true; break; } + #endif + #endif + + START_MENU(); + BACK_ITEM(MSG_MAIN); + + // + // Nozzle: + // Nozzle [1-5]: + // + #if HOTENDS == 1 + EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - (HOTEND_OVERSHOOT), []{ thermalManager.start_watching_hotend(0); }); + #elif HAS_MULTI_HOTEND + HOTEND_LOOP() + EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.heater_maxtemp[e] - (HOTEND_OVERSHOOT), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); }); + #endif + + #if ENABLED(SINGLENOZZLE_STANDBY_TEMP) + LOOP_S_L_N(e, 1, EXTRUDERS) + EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.heater_maxtemp[0] - (HOTEND_OVERSHOOT)); + #endif + + // + // Bed: + // + #if HAS_HEATED_BED + EDIT_ITEM_FAST(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAX_TARGET, thermalManager.start_watching_bed); + #endif + + // + // Chamber: + // + #if HAS_HEATED_CHAMBER + EDIT_ITEM_FAST(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 10, thermalManager.start_watching_chamber); + #endif + + // + // Fan Speed: + // + #if HAS_FAN + + DEFINE_SINGLENOZZLE_ITEM(); + + #if HAS_FAN0 + _FAN_EDIT_ITEMS(0,FIRST_FAN_SPEED); + #endif + #if HAS_FAN1 + FAN_EDIT_ITEMS(1); + #elif SNFAN(1) + singlenozzle_item(1); + #endif + #if HAS_FAN2 + FAN_EDIT_ITEMS(2); + #elif SNFAN(2) + singlenozzle_item(2); + #endif + #if HAS_FAN3 + FAN_EDIT_ITEMS(3); + #elif SNFAN(3) + singlenozzle_item(3); + #endif + #if HAS_FAN4 + FAN_EDIT_ITEMS(4); + #elif SNFAN(4) + singlenozzle_item(4); + #endif + #if HAS_FAN5 + FAN_EDIT_ITEMS(5); + #elif SNFAN(5) + singlenozzle_item(5); + #endif + #if HAS_FAN6 + FAN_EDIT_ITEMS(6); + #elif SNFAN(6) + singlenozzle_item(6); + #endif + #if HAS_FAN7 + FAN_EDIT_ITEMS(7); + #elif SNFAN(7) + singlenozzle_item(7); + #endif + + #endif // HAS_FAN + + #if PREHEAT_COUNT + // + // Preheat for Materials 1 to 5 + // + LOOP_L_N(m, PREHEAT_COUNT) { + editable.int8 = m; + #if HOTENDS > 1 || HAS_HEATED_BED + SUBMENU_S(ui.get_preheat_label(m), MSG_PREHEAT_M, menu_preheat_m); + #else + ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M, do_preheat_end_m); + #endif + } + #endif + + #if HAS_TEMP_HOTEND || HAS_HEATED_BED + // + // Cooldown + // + if (TERN0(HAS_HEATED_BED, thermalManager.temp_bed.target)) has_heat = true; + if (has_heat) ACTION_ITEM(MSG_COOLDOWN, lcd_cooldown); + #endif + + END_MENU(); +} + +#endif // HAS_LCD_MENU && HAS_TEMPERATURE |