1 files changed, 64 insertions, 0 deletions
diff --git a/Marlin/src/module/thermistor/thermistor_6.h b/Marlin/src/module/thermistor/thermistor_6.h
new file mode 100644
index 0000000..6811341
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_6.h
@@ -0,0 +1,64 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor
+const temp_entry_t temptable_6[] PROGMEM = {
+  { OV(   1), 350 },
+  { OV(  28), 250 }, // top rating 250C
+  { OV(  31), 245 },
+  { OV(  35), 240 },
+  { OV(  39), 235 },
+  { OV(  42), 230 },
+  { OV(  44), 225 },
+  { OV(  49), 220 },
+  { OV(  53), 215 },
+  { OV(  62), 210 },
+  { OV(  71), 205 }, // fitted graphically
+  { OV(  78), 200 }, // fitted graphically
+  { OV(  94), 190 },
+  { OV( 102), 185 },
+  { OV( 116), 170 },
+  { OV( 143), 160 },
+  { OV( 183), 150 },
+  { OV( 223), 140 },
+  { OV( 270), 130 },
+  { OV( 318), 120 },
+  { OV( 383), 110 },
+  { OV( 413), 105 },
+  { OV( 439), 100 },
+  { OV( 484),  95 },
+  { OV( 513),  90 },
+  { OV( 607),  80 },
+  { OV( 664),  70 },
+  { OV( 781),  60 },
+  { OV( 810),  55 },
+  { OV( 849),  50 },
+  { OV( 914),  45 },
+  { OV( 914),  40 },
+  { OV( 935),  35 },
+  { OV( 954),  30 },
+  { OV( 970),  25 },
+  { OV( 978),  22 },
+  { OV(1008),   3 },
+  { OV(1023),   0 } // to allow internal 0 degrees C
+};