1 files changed, 107 insertions, 0 deletions
diff --git a/Marlin/src/pins/esp32/pins_E4D.h b/Marlin/src/pins/esp32/pins_E4D.h
new file mode 100644
index 0000000..4a5a2bf
--- /dev/null
+++ b/Marlin/src/pins/esp32/pins_E4D.h
@@ -0,0 +1,107 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * E4d@Box  pin assignments
+ * E4d@Box is a small factor 3D printer control board based on the ESP32 microcontroller for Laser, CNC and 3d printers
+ * for more info check https://atbox.tech/ and join to Facebook page E4d@box.
+ */
+
+#if NOT_TARGET(ARDUINO_ARCH_ESP32)
+  #error "Oops! Select an ESP32 board in 'Tools > Board.'"
+#elif EXTRUDERS > 1 || E_STEPPERS > 1
+  #error "E4d@box only supports one E Stepper. Comment out this line to continue."
+#elif HOTENDS > 1
+  #error "E4d@box only supports one hotend / E-stepper. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME       "E4D@BOX"
+#define BOARD_WEBSITE_URL     "github.com/Exilaus/E4d@box"
+#define DEFAULT_MACHINE_NAME  BOARD_INFO_NAME
+
+//
+// Disable I2S stepper stream
+//
+#undef I2S_STEPPER_STREAM
+
+//
+// Redefine I2S for ESP32
+//
+#undef I2S_WS
+#define I2S_WS                                23
+#undef I2S_BCK
+#define I2S_BCK                               22
+#undef I2S_DATA
+#define I2S_DATA                              21
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            34
+#define Y_STOP_PIN                            35
+#define Z_STOP_PIN                            16
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            12
+#define X_DIR_PIN                             13
+#define X_ENABLE_PIN                          17
+//#define X_CS_PIN                             0
+
+#define Y_STEP_PIN                            32
+#define Y_DIR_PIN                             33
+#define Y_ENABLE_PIN                X_ENABLE_PIN
+//#define Y_CS_PIN                            13
+
+#define Z_STEP_PIN                            25
+#define Z_DIR_PIN                             26
+#define Z_ENABLE_PIN                X_ENABLE_PIN
+//#define Z_CS_PIN                             5  // SS_PIN
+
+#define E0_STEP_PIN                           27
+#define E0_DIR_PIN                            14
+#define E0_ENABLE_PIN               X_ENABLE_PIN
+//#define E0_CS_PIN                           21
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            36  // Analog Input
+#define TEMP_BED_PIN                          39  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           2
+#define FAN_PIN                                0
+#define HEATER_BED_PIN                        15
+
+//
+// MicroSD card on SPI
+//
+#define SD_MOSI_PIN                           23
+#define SD_MISO_PIN                           19
+#define SD_SCK_PIN                            18
+#define SDSS                                   5
+#define USES_SHARED_SPI                           // SPI is shared by SD card with TMC SPI drivers