diff options
Diffstat (limited to 'Marlin/src/pins/lpc1769/pins_FLY_CDY.h')
| -rw-r--r-- | Marlin/src/pins/lpc1769/pins_FLY_CDY.h | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/Marlin/src/pins/lpc1769/pins_FLY_CDY.h b/Marlin/src/pins/lpc1769/pins_FLY_CDY.h new file mode 100644 index 0000000..3982d76 --- /dev/null +++ b/Marlin/src/pins/lpc1769/pins_FLY_CDY.h @@ -0,0 +1,181 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(MCU_LPC1769) + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "FLY-CDY" +#define BOARD_WEBSITE_URL "github.com/FLYmaker/FLY-CDY" + +// +// Servos +// +#define SERVO0_PIN P1_26 + +// +// Limit Switches +// + +#define X_MIN_PIN P1_29 // X- +#define X_MAX_PIN P1_28 // X+ +#define Y_MIN_PIN P1_27 // Y- +#define Y_MAX_PIN P1_25 // Y+ +#define Z_MIN_PIN P1_22 // Z- +#define Z_MAX_PIN P0_27 // Z+ + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P1_01 +#define X_ENABLE_PIN P1_00 +#ifndef X_CS_PIN + #define X_CS_PIN P1_04 +#endif + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P1_09 +#define Y_ENABLE_PIN P1_08 +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_10 +#endif + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P1_15 +#define Z_ENABLE_PIN P1_14 +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_16 +#endif + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P4_29 +#define E0_ENABLE_PIN P1_17 +#ifndef E0_CS_PIN + #define E0_CS_PIN P4_28 +#endif + +#define E1_STEP_PIN P2_04 +#define E1_DIR_PIN P2_11 +#define E1_ENABLE_PIN P0_04 +#ifndef E1_CS_PIN + #define E1_CS_PIN P2_12 +#endif + +#define E2_STEP_PIN P2_05 +#define E2_DIR_PIN P0_11 +#define E2_ENABLE_PIN P2_13 +#ifndef E2_CS_PIN + #define E2_CS_PIN P0_10 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P0_20 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P0_19 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P0_21 + #endif +#endif + +#if HAS_TMC_UART + #define X_SERIAL_TX_PIN P1_04 + #define X_SERIAL_RX_PIN P1_04 + + #define Y_SERIAL_TX_PIN P1_10 + #define Y_SERIAL_RX_PIN P1_10 + + #define Z_SERIAL_TX_PIN P1_16 + #define Z_SERIAL_RX_PIN P1_16 + + #define E0_SERIAL_TX_PIN P4_28 + #define E0_SERIAL_RX_PIN P4_28 + + #define E1_SERIAL_TX_PIN P2_12 + #define E1_SERIAL_RX_PIN P2_12 + + #define E2_SERIAL_TX_PIN P0_10 + #define E2_SERIAL_RX_PIN P0_10 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN P0_26_A3 // (T4) +#define TEMP_1_PIN P0_25_A2 // (T3) +#define TEMP_2_PIN P0_24_A1 // (T2) +#define TEMP_BED_PIN P0_23_A0 // (T1) + +// +// Heaters / Fans +// +#define HEATER_BED_PIN P3_26 +#define HEATER_0_PIN P3_25 +#define HEATER_1_PIN P1_20 +#define HEATER_2_PIN P1_23 +#ifndef FAN_PIN + #define FAN_PIN P1_18 +#endif +#define FAN1_PIN P1_21 +#define FAN2_PIN P1_24 + +// +// LCD / Controller +// +#define BEEPER_PIN P2_07 +#define LCD_PINS_RS P2_10 +#define LCD_PINS_ENABLE P0_22 +#define LCD_PINS_D4 P1_19 +#define LCD_PINS_D5 P2_08 +#define LCD_PINS_D6 P1_30 +#define LCD_PINS_D7 P1_31 +#define BTN_EN1 P0_00 +#define BTN_EN2 P0_01 +#define BTN_ENC P0_28 + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(ONBOARD) + #define SD_SS_PIN P0_06 + #define SD_SCK_PIN P0_07 + #define SD_MISO_PIN P0_08 + #define SD_MOSI_PIN P0_09 + #define SD_DETECT_PIN P0_05 +#elif SD_CONNECTION_IS(LCD) + #define SD_SCK_PIN P0_15 + #define SD_MISO_PIN P0_17 + #define SD_MOSI_PIN P0_18 + #define SD_SS_PIN P0_16 + #define SD_DETECT_PIN P2_06 +#endif |