diff options
Diffstat (limited to 'Marlin/src/pins/mega/pins_CHEAPTRONICv2.h')
| -rw-r--r-- | Marlin/src/pins/mega/pins_CHEAPTRONICv2.h | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h new file mode 100644 index 0000000..3f18bc8 --- /dev/null +++ b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h @@ -0,0 +1,140 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Cheaptronic v2.0 pin assignments + * Built and sold by Michal Dyntar - RRO + * www.reprapobchod.cz + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Cheaptronic v2.0" + +// +// Limit Switches +// +#define X_MIN_PIN 30 +#define X_MAX_PIN 31 +#define Y_MIN_PIN 32 +#define Y_MAX_PIN 33 +#define Z_MIN_PIN 34 +#define Z_MAX_PIN 35 + +// +// Steppers +// +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 + +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 + +#define Z_STEP_PIN 57 +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 + +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 22 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 25 +#define E1_ENABLE_PIN 27 + +#define E2_STEP_PIN 29 +#define E2_DIR_PIN 28 +#define E2_ENABLE_PIN 39 + +// +// Temperature sensors +// +#define TEMP_0_PIN 15 +#define TEMP_1_PIN 13 +#define TEMP_2_PIN 14 +#define TEMP_3_PIN 11 // should be used for chamber temperature control +#define TEMP_BED_PIN 12 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 6 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 8 +#define HEATER_BED_PIN 9 +#ifndef FAN_PIN + #define FAN_PIN 3 +#endif +#define FAN2_PIN 58 // additional fan or light control output + +// +// Other board specific pins +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 37 // board input labeled as F-DET +#endif +#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe) +#define LED_PIN 13 +#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too +#define EXT_2 5 // additional PWM pin 2 at JP1 connector +#define EXT_3 2 // additional PWM pin 3 at JP1 connector +#define PS_ON_PIN 45 +#define KILL_PIN 46 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 11 // shared with TEMP_3 analog input +#endif + +// +// LCD / Controller +// +#define LCD_PINS_RS 19 +#define LCD_PINS_ENABLE 42 +#define LCD_PINS_D4 18 +#define LCD_PINS_D5 38 +#define LCD_PINS_D6 41 +#define LCD_PINS_D7 40 + +#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder +#endif + +// +// Beeper, SD Card, Encoder +// +#define BEEPER_PIN 44 + +#if ENABLED(SDSUPPORT) + #define SDSS 53 + #define SD_DETECT_PIN 49 +#endif + +#if IS_NEWPANEL + #define BTN_EN1 11 + #define BTN_EN2 12 + #define BTN_ENC 43 +#endif |