1 files changed, 127 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h
new file mode 100644
index 0000000..8bafbdf
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h
@@ -0,0 +1,127 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * CNControls V15 for HMS434 pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "CN Controls V15"
+
+//
+// Servos
+//
+#define SERVO0_PIN                             6
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            34
+#define Y_STOP_PIN                            39
+#define Z_STOP_PIN                            62
+
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     49
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            14
+#define X_DIR_PIN                             25
+#define X_ENABLE_PIN                          26
+
+#define Y_STEP_PIN                            11
+#define Y_DIR_PIN                             12
+#define Y_ENABLE_PIN                          15
+
+#define Z_STEP_PIN                            24
+#define Z_DIR_PIN                             27
+#define Z_ENABLE_PIN                          28
+
+#define E0_STEP_PIN                           64
+#define E0_DIR_PIN                            65
+#define E0_ENABLE_PIN                         63
+
+//
+// Temperature Sensors
+// Analog Inputs
+//
+#define TEMP_0_PIN                             2  // Analog Input
+#define TEMP_BED_PIN                           4  // Analog Input
+
+#ifndef TEMP_CHAMBER_PIN
+  #define TEMP_CHAMBER_PIN                     5  // Analog Input
+#endif
+
+//
+// Heaters
+//
+#define HEATER_0_PIN                           4
+#define HEATER_BED_PIN                        32
+#define HEATER_CHAMBER_PIN                    33
+
+//
+// Fans
+//
+#define FAN_PIN                                8
+
+//
+// Auto fans
+//
+#define AUTO_FAN_PIN                          30
+#ifndef E0_AUTO_FAN_PIN
+  #define E0_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E1_AUTO_FAN_PIN
+  #define E1_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E2_AUTO_FAN_PIN
+  #define E2_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E3_AUTO_FAN_PIN
+  #define E3_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef CHAMBER_AUTO_FAN_PIN
+  //#define CHAMBER_AUTO_FAN_PIN              10
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define SD_DETECT_PIN                         40
+
+// Common I/O
+
+#define FIL_RUNOUT_PIN                         9
+//#define FIL_RUNOUT_PIN                      29  // encoder sensor
+//#define PWM_1_PIN                           12
+//#define PWM_2_PIN                           13
+//#define SPARE_IO                            17
+#define BEEPER_PIN                            13
+#define STAT_LED_BLUE_PIN                     -1
+#define STAT_LED_RED_PIN                      10  // 31