diff options
Diffstat (limited to 'Marlin/src/pins/mega/pins_MEGACONTROLLER.h')
| -rw-r--r-- | Marlin/src/pins/mega/pins_MEGACONTROLLER.h | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h new file mode 100644 index 0000000..938ad82 --- /dev/null +++ b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h @@ -0,0 +1,167 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Mega controller pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Mega Controller supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Mega Controller" + +// +// Servos +// +#define SERVO0_PIN 30 +#define SERVO1_PIN 31 +#define SERVO2_PIN 32 +#define SERVO3_PIN 33 + +// +// Limit Switches +// +#define X_MIN_PIN 43 +#define X_MAX_PIN 42 +#define Y_MIN_PIN 38 +#define Y_MAX_PIN 41 +#define Z_MIN_PIN 40 +#define Z_MAX_PIN 37 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 37 +#endif + +// +// Steppers +// +#define X_STEP_PIN 62 // A8 +#define X_DIR_PIN 63 // A9 +#define X_ENABLE_PIN 61 // A7 + +#define Y_STEP_PIN 65 // A11 +#define Y_DIR_PIN 66 // A12 +#define Y_ENABLE_PIN 64 // A10 + +#define Z_STEP_PIN 68 // A14 +#define Z_DIR_PIN 69 // A15 +#define Z_ENABLE_PIN 67 // A13 + +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 24 +#define E0_ENABLE_PIN 22 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 27 +#define E1_ENABLE_PIN 25 + +// +// Temperature Sensors +// +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 4 // Analog Input +#else + #define TEMP_0_PIN 0 // Analog Input +#endif + +#if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 5 // Analog Input +#else + #define TEMP_1_PIN 2 // Analog Input +#endif + +#define TEMP_2_PIN 3 // Analog Input + +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 6 // Analog Input +#else + #define TEMP_BED_PIN 1 // Analog Input +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 29 +#define HEATER_1_PIN 34 +#define HEATER_BED_PIN 28 + +#ifndef FAN_PIN + #define FAN_PIN 39 +#endif +#define FAN1_PIN 35 +#define FAN2_PIN 36 + +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN FAN2_PIN +#endif + +#define FAN_SOFT_PWM + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 2 +#endif + +// +// LCD / Controller +// +#if ENABLED(MINIPANEL) + + #define BEEPER_PIN 46 + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 47 + #define DOGLCD_CS 45 + #define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3 + + #define KILL_PIN 12 + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #define BTN_EN1 48 + #define BTN_EN2 11 + #define BTN_ENC 10 + + #define SD_DETECT_PIN 49 + +#endif // MINIPANEL + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 7 // Pullup! +#define SPINDLE_DIR_PIN 8 |