diff options
Diffstat (limited to 'Marlin/src/pins/mega/pins_MEGATRONICS.h')
| -rw-r--r-- | Marlin/src/pins/mega/pins_MEGATRONICS.h | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS.h b/Marlin/src/pins/mega/pins_MEGATRONICS.h new file mode 100644 index 0000000..f813366 --- /dev/null +++ b/Marlin/src/pins/mega/pins_MEGATRONICS.h @@ -0,0 +1,134 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MegaTronics pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Megatronics" +// +// Limit Switches +// +#define X_MIN_PIN 41 +#define X_MAX_PIN 37 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 +#endif + +// +// Steppers +// +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 60 // A6 +#define Y_DIR_PIN 61 // A7 +#define Y_ENABLE_PIN 22 + +#define Z_STEP_PIN 54 // A0 +#define Z_DIR_PIN 55 // A1 +#define Z_ENABLE_PIN 56 // A2 + +#define E0_STEP_PIN 31 +#define E0_DIR_PIN 32 +#define E0_ENABLE_PIN 38 + +#define E1_STEP_PIN 34 +#define E1_DIR_PIN 36 +#define E1_ENABLE_PIN 30 + +// +// Temperature Sensors +// +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 8 // Analog Input +#else + #define TEMP_0_PIN 13 // Analog Input +#endif +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 +#define HEATER_BED_PIN 10 + +#ifndef FAN_PIN + #define FAN_PIN 7 // IO pin. Buffer needed +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 2 +#endif + +// +// LCD / Controller +// +#define BEEPER_PIN 33 + +#if IS_ULTRA_LCD && IS_NEWPANEL + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + // Buttons directly attached to AUX-2 + #define BTN_EN1 59 + #define BTN_EN2 64 + #define BTN_ENC 43 + + #define SD_DETECT_PIN -1 // RAMPS doesn't use this + +#endif // IS_ULTRA_LCD && IS_NEWPANEL + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 4 // Pullup! +#define SPINDLE_DIR_PIN 11 |