diff options
Diffstat (limited to 'Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h')
| -rw-r--r-- | Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h | 304 |
1 files changed, 304 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h new file mode 100644 index 0000000..b260a27 --- /dev/null +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -0,0 +1,304 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Mightyboard Rev.E pin assignments + * also works for Rev D boards. It's all rev E despite what the silk screen says + */ + +/** + * Rev B 2 JAN 2017 + * + * Added pin definitions for: + * M3, M4 & M5 spindle control commands + * case light + * + * Corrected pin assignment for EX2_HEAT_PIN pin. Changed it from 9 to 11. The port + * number (B5) agrees with the schematic but B5 is assigned to logical pin 11. + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Mightyboard" +#define DEFAULT_MACHINE_NAME "MB Replicator" + +// +// Servos +// +#define SERVO0_PIN 36 // C1 (1280-EX1) +#define SERVO1_PIN 37 // C0 (1280-EX2) +#define SERVO2_PIN 40 // G1 (1280-EX3) +#define SERVO3_PIN 41 // G0 (1280-EX4) + +// +// Limit Switches +// +#define X_MIN_PIN 49 // L0 +#define X_MAX_PIN 48 // L1 +#define Y_MIN_PIN 47 // L2 +#define Y_MAX_PIN 46 // L3 +#define Z_MIN_PIN 43 // L6 +#define Z_MAX_PIN 42 // L7 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 42 +#endif + +// +// Filament Runout Pins +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 49 +#endif +#ifndef FIL_RUNOUT2_PIN + #define FIL_RUNOUT2_PIN 47 +#endif + +// +// Steppers +// +#define X_STEP_PIN 55 // F1 +#define X_DIR_PIN 54 // F0 +#define X_ENABLE_PIN 56 // F2 + +#define Y_STEP_PIN 59 // F5 +#define Y_DIR_PIN 58 // F4 +#define Y_ENABLE_PIN 60 // F6 + +#define Z_STEP_PIN 63 // K1 +#define Z_DIR_PIN 62 // K0 +#define Z_ENABLE_PIN 64 // K2 + +#define E0_STEP_PIN 25 // A3 +#define E0_DIR_PIN 24 // A2 +#define E0_ENABLE_PIN 26 // A4 + +#define E1_STEP_PIN 29 // A7 +#define E1_DIR_PIN 28 // A6 +#define E1_ENABLE_PIN 39 // G2 + +// +// I2C Digipots - MCP4018 +// Address 5E (2F << 1) +// Set from 0 - 127 with stop bit. +// (Ex. 3F << 1 | 1) +// +#define DIGIPOTS_I2C_SCL 76 // J5 +#define DIGIPOTS_I2C_SDA_X 57 // F3 +#define DIGIPOTS_I2C_SDA_Y 61 // F7 +#define DIGIPOTS_I2C_SDA_Z 65 // K3 +#define DIGIPOTS_I2C_SDA_E0 27 // A5 +#define DIGIPOTS_I2C_SDA_E1 77 // J6 + +#ifndef DIGIPOT_I2C_ADDRESS_A + #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) +#endif +#define DIGIPOT_ENABLE_I2C_PULLUPS // MightyBoard doesn't have hardware I2C pin pull-ups. + +// +// Temperature Sensors +// +// K7 - 69 / ADC15 - 15 +#define TEMP_BED_PIN 15 + +// SPI for Max6675 or Max31855 Thermocouple +// Uses a separate SPI bus +// +// 3 E5 DO (SO) +// 5 E3 CS1 +// 2 E4 CS2 +// 78 E2 SCK +// +#define THERMO_SCK_PIN 78 // E2 +#define THERMO_DO_PIN 3 // E5 +#define THERMO_CS1_PIN 5 // E3 +#define THERMO_CS2_PIN 2 // E4 + +#define MAX6675_SS_PIN THERMO_CS1_PIN +#define MAX6675_SS2_PIN THERMO_CS2_PIN +#define MAX6675_SCK_PIN THERMO_SCK_PIN +#define MAX6675_DO_PIN THERMO_DO_PIN + +// +// Augmentation for auto-assigning plugs +// +// Two thermocouple connectors allows for either +// 2 extruders or 1 extruder and a heated bed. +// With no heated bed, an additional 24V fan is possible. +// + +// Labels from the schematic: +#define EX1_HEAT_PIN 6 // H3 +#define EX1_FAN_PIN 7 // H4 +#define EX2_HEAT_PIN 11 // B5 +#define EX2_FAN_PIN 12 // B6 +#define HBP_PIN 45 // L4 +#define EXTRA_FET_PIN 44 // L5 + +#if HAS_MULTI_HOTEND + #if TEMP_SENSOR_BED + #define IS_EEB + #else + #define IS_EEF + #endif +#elif TEMP_SENSOR_BED + #define IS_EFB +#else + #define IS_EFF +#endif + +// +// Heaters / Fans (24V) +// +#define HEATER_0_PIN EX1_HEAT_PIN + +#if ENABLED(IS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN HBP_PIN +#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN EX2_HEAT_PIN +#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN EX2_HEAT_PIN + #define HEATER_BED_PIN HBP_PIN +#elif ENABLED(IS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN HBP_PIN +#endif + +#ifndef FAN_PIN + #if EITHER(IS_EFB, IS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan + #define FAN_PIN EX2_HEAT_PIN + #elif EITHER(IS_EEF, IS_SF) // Hotend, Hotend, Fan or Spindle, Fan + #define FAN_PIN HBP_PIN + #else + #define FAN_PIN EXTRA_FET_PIN + #endif +#endif + +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN EX2_FAN_PIN +#endif + +// +// Misc. Functions +// +#define LED_PIN 13 // B7 +#define CUTOFF_RESET_PIN 16 // H1 +#define CUTOFF_TEST_PIN 17 // H0 +#define CUTOFF_SR_CHECK_PIN 70 // G4 (TOSC1) + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + + #if IS_RRD_FG_SC + + #define LCD_PINS_RS 33 // C4: LCD-STROBE + #define LCD_PINS_ENABLE 72 // J2: LEFT + #define LCD_PINS_D4 35 // C2: LCD-CLK + #define LCD_PINS_D5 32 // C5: RLED + #define LCD_PINS_D6 34 // C3: LCD-DATA + #define LCD_PINS_D7 31 // C6: GLED + + #define BTN_EN2 75 // J4, UP + #define BTN_EN1 73 // J3, DOWN + //STOP button connected as KILL_PIN + #define KILL_PIN 14 // J1, RIGHT + //KILL - not connected + + #define BEEPER_PIN 8 // H5, SD_WP + + //on board leds + #define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2) + #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3) + + #else + // Replicator uses a 3-wire SR controller with HD44780 + #define SR_DATA_PIN 34 // C3 + #define SR_CLK_PIN 35 // C2 + #define SR_STROBE_PIN 33 // C4 + + #define BTN_UP 75 // J4 + #define BTN_DWN 73 // J3 + #define BTN_LFT 72 // J2 + #define BTN_RT 14 // J1 + + // Disable encoder + #undef BTN_EN1 + #undef BTN_EN2 + + #define BEEPER_PIN 4 // G5 + + #define STAT_LED_RED_PIN 32 // C5 + #define STAT_LED_BLUE_PIN 31 // C6 (Actually green) + + #endif + + #define BTN_CENTER 15 // J0 + #define BTN_ENC BTN_CENTER + +#endif // HAS_WIRED_LCD + +// +// SD Card +// +#define SDSS 53 // B0 +#define SD_DETECT_PIN 9 // H6 + +// +// TMC 220x +// +#if HAS_TMC_UART + /** + * TMC220x stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + #define X_HARDWARE_SERIAL Serial2 + #define Y_HARDWARE_SERIAL Serial1 + + /** + * Software serial + */ + + #define X_SERIAL_TX_PIN 16 + #define X_SERIAL_RX_PIN 17 + + #define Y_SERIAL_TX_PIN 18 + #define Y_SERIAL_RX_PIN 19 + + #define Z_SERIAL_TX_PIN 41 + #define Z_SERIAL_RX_PIN 66 + + #define E0_SERIAL_TX_PIN 40 + #define E0_SERIAL_RX_PIN 67 + + #define E1_SERIAL_TX_PIN 37 + #define E1_SERIAL_RX_PIN 68 + +#endif |