1 files changed, 99 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_SILVER_GATE.h b/Marlin/src/pins/mega/pins_SILVER_GATE.h
new file mode 100644
index 0000000..41cbe5e
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_SILVER_GATE.h
@@ -0,0 +1,99 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(__AVR_ATmega1281__, __AVR_ATmega2561__)
+  #error "Oops! Select 'Silvergate' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Silver Gate"
+
+#define X_STEP_PIN                            43
+#define X_DIR_PIN                             44
+#define X_ENABLE_PIN                          42
+#define X_MIN_PIN                             31
+#define X_MAX_PIN                             34
+
+#define Y_STEP_PIN                            40
+#define Y_DIR_PIN                             41
+#define Y_ENABLE_PIN                          39
+#define Y_MIN_PIN                             32
+#define Y_MAX_PIN                             35
+
+#define Z_STEP_PIN                            13
+#define Z_DIR_PIN                             38
+#define Z_ENABLE_PIN                          14
+#define Z_MIN_PIN                             33
+#define Z_MAX_PIN                             36
+
+#define E0_STEP_PIN                           27
+#define E0_DIR_PIN                            37
+#define E0_ENABLE_PIN                         45
+
+#define SDSS                                  16
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                      34  // X_MAX unless overridden
+#endif
+
+#ifndef FAN_PIN
+  #define FAN_PIN                              5
+#endif
+
+#define HEATER_0_PIN                           7
+
+#ifndef E0_AUTO_FAN_PIN
+  #define E0_AUTO_FAN_PIN                      3
+#endif
+
+#define CONTROLLER_FAN_PIN                     2
+
+#define TEMP_0_PIN                             7  // Analog Input
+
+#define HEATER_BED_PIN                         8
+#define TEMP_BED_PIN                           6
+
+#if HAS_MARLINUI_U8GLIB
+  #if ENABLED(U8GLIB_ST7920)                      // SPI GLCD 12864 ST7920
+    #define LCD_PINS_RS                       30
+    #define LCD_PINS_ENABLE                   20
+    #define LCD_PINS_D4                       25
+    #define BEEPER_PIN                        29
+    #define BTN_EN1                           19
+    #define BTN_EN2                           22
+    #define BTN_ENC                           24
+    #define LCD_BACKLIGHT_PIN                  6
+    #if ENABLED(SILVER_GATE_GLCD_CONTROLLER)
+      #define KILL_PIN                        21
+      #define HOME_PIN                        28
+    #endif
+  #endif
+#endif
+
+#define SD_DETECT_PIN                         15
+
+#define STAT_LED_RED_PIN                      23
+#define STAT_LED_BLUE_PIN                     26
+
+#ifndef CASE_LIGHT_PIN
+  #define CASE_LIGHT_PIN                      51
+#endif