1 files changed, 111 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h
new file mode 100644
index 0000000..715e823
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h
@@ -0,0 +1,111 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Wanhao 0ne+ pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME      "Wanhao i3 Mini 0ne+"
+#define DEFAULT_MACHINE_NAME "i3 Mini"
+#define BOARD_WEBSITE_URL    "tinyurl.com/yyxw7se7"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            19
+#define Y_STOP_PIN                            18
+#define Z_STOP_PIN                            38
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     38
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            22
+#define X_DIR_PIN                             23
+#define X_ENABLE_PIN                          57
+
+#define Y_STEP_PIN                            25
+#define Y_DIR_PIN                             26
+#define Y_ENABLE_PIN                          24
+
+#define Z_STEP_PIN                            29
+#define Z_DIR_PIN                             39
+#define Z_ENABLE_PIN                          28
+
+#define E0_STEP_PIN                           55
+#define E0_DIR_PIN                            56
+#define E0_ENABLE_PIN                         54
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            13
+#define TEMP_BED_PIN                          14
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           4
+#define HEATER_BED_PIN                        44
+#define FAN_PIN                               12  // IO pin. Buffer needed
+
+//
+// SD Card
+//
+#define SD_DETECT_PIN                         83
+#define SDSS                                  53
+
+//
+// Misc. Functions
+//
+#define BEEPER_PIN                            37
+#define KILL_PIN                              64
+
+//
+// LCD / Controller (Integrated MINIPANEL)
+//
+#if ENABLED(MINIPANEL)
+  #define DOGLCD_A0                           40
+  #define DOGLCD_CS                           41
+  #define LCD_BACKLIGHT_PIN                   65  // Backlight LED on A11/D65
+  #define LCD_RESET_PIN                       27
+
+  #define BTN_EN1                              2
+  #define BTN_EN2                              3
+  #define BTN_ENC                              5
+
+  // This display has adjustable contrast
+  #define LCD_CONTRAST_MIN                     0
+  #define LCD_CONTRAST_MAX                   255
+  #define LCD_CONTRAST_INIT     LCD_CONTRAST_MAX
+#endif