diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h new file mode 100644 index 0000000..9ba6a0c --- /dev/null +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h @@ -0,0 +1,177 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * AZTEEG_X3_PRO (Arduino Mega) pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 5 || E_STEPPERS > 5 + #error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Azteeg X3 Pro" + +// +// RAMPS pins overrides +// + +// +// Servos +// +// Tested this pin with bed leveling on a Delta with 1 servo. +// Physical wire attachment on EXT1: GND, 5V, D47. +// +#define SERVO0_PIN 47 + +// +// Limit Switches +// +#define X_STOP_PIN 3 +#define Y_STOP_PIN 14 +#define Z_STOP_PIN 18 + +#ifndef FAN_PIN + #define FAN_PIN 6 +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) + #define CASE_LIGHT_PIN 44 +#endif + +// +// Import RAMPS 1.4 pins +// +#include "pins_RAMPS.h" + +// DIGIPOT slave addresses +#ifndef DIGIPOT_I2C_ADDRESS_A + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) +#endif +#ifndef DIGIPOT_I2C_ADDRESS_B + #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 18 +#endif + +// +// Steppers +// +#define E2_STEP_PIN 23 +#define E2_DIR_PIN 25 +#define E2_ENABLE_PIN 40 + +#define E3_STEP_PIN 27 +#define E3_DIR_PIN 29 +#define E3_ENABLE_PIN 41 + +#define E4_STEP_PIN 43 +#define E4_DIR_PIN 37 +#define E4_ENABLE_PIN 42 + +// +// Temperature Sensors +// +#define TEMP_2_PIN 12 // Analog Input +#define TEMP_3_PIN 11 // Analog Input +#define TEMP_4_PIN 10 // Analog Input +#define TC1 4 // Analog Input (Thermo couple on Azteeg X3Pro) +#define TC2 5 // Analog Input (Thermo couple on Azteeg X3Pro) + +// +// Heaters / Fans +// +#define HEATER_2_PIN 16 +#define HEATER_3_PIN 17 +#define HEATER_4_PIN 4 +#define HEATER_5_PIN 5 +#define HEATER_6_PIN 6 +#define HEATER_7_PIN 11 + +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) +#endif + +// +// Auto fans +// +#define AUTO_FAN_PIN 5 +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E3_AUTO_FAN_PIN + #define E3_AUTO_FAN_PIN AUTO_FAN_PIN +#endif + +// +// LCD / Controller +// +#undef BEEPER_PIN +#define BEEPER_PIN 33 + +#if ANY(VIKI2, miniVIKI) + #undef SD_DETECT_PIN + #define SD_DETECT_PIN 49 // For easy adapter board + #undef BEEPER_PIN + #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display +#else + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 +#endif + +// +// Misc. Functions +// +#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN + #undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it + #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments + // as the wiring diagram uses pin 44 for DOGLCD_A0 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3pro board +#undef SPINDLE_LASER_ENA_PIN +#undef SPINDLE_DIR_PIN + +#if HAS_CUTTER // EXP2 header + #if ANY(VIKI2, miniVIKI) + #define BTN_EN2 31 // Pin 7 needed for Spindle PWM + #endif + #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 20 // Pullup! + #define SPINDLE_DIR_PIN 21 +#endif |