1 files changed, 68 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h
new file mode 100644
index 0000000..843eadb
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h
@@ -0,0 +1,68 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Formbot Raptor 2 pin assignments
+ */
+
+#define BOARD_INFO_NAME      "Formbot Raptor2"
+#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
+
+#define FAN_PIN                                6
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                      22
+#endif
+
+#include "pins_FORMBOT_RAPTOR.h"
+
+#define GREEDY_PANEL ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
+  #if !NUM_SERVOS                                 // Try to use servo connector first
+    #define SPINDLE_LASER_ENA_PIN              6  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN              4  // Hardware PWM
+    #define SPINDLE_DIR_PIN                    5
+  #elif !GREEDY_PANEL                             // Try to use AUX2
+    #define SPINDLE_LASER_ENA_PIN              4  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN             44  // Hardware PWM
+    #define SPINDLE_DIR_PIN                   65
+  #endif
+#endif
+
+#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
+  #if NUM_SERVOS <= 1                             // Try to use servo connector first
+    #define CASE_LIGHT_PIN                     6  // Hardware PWM
+  #elif !GREEDY_PANEL                             // Try to use AUX2
+    #define CASE_LIGHT_PIN                    44  // Hardware PWM
+  #endif
+#endif
+
+#undef GREEDY_PANEL
+
+#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && (CASE_LIGHT_PIN == SPINDLE_LASER_ENA_PIN || CASE_LIGHT_PIN == SPINDLE_LASER_PWM_PIN)
+  #error "CASE_LIGHT_PIN conflicts with a Spindle / Laser pin."
+#endif