1 files changed, 127 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_K8600.h b/Marlin/src/pins/ramps/pins_K8600.h
new file mode 100644
index 0000000..1a396b2
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_K8600.h
@@ -0,0 +1,127 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * VERTEX NANO Arduino Mega with RAMPS EFB v1.4 pin assignments.
+ */
+
+#if HOTENDS > 1
+  #error "Only 1 hotend is supported for Vertex Nano."
+#endif
+
+#define BOARD_INFO_NAME      "K8600"
+#define DEFAULT_MACHINE_NAME "Vertex Nano"
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                              3
+#define Y_MAX_PIN                             14
+#define Z_MAX_PIN                             18
+#define Z_MIN_PIN                             -1
+
+//
+// Heaters / Fans
+//
+#define FAN_PIN                                8
+
+//
+// Misc. Functions
+//
+#define CASE_LIGHT_PIN                         7
+
+//
+// Other RAMPS pins
+//
+#define IS_RAMPS_EFB                              // Override autodetection. Bed will be undefined.
+#include "pins_RAMPS.h"
+
+//
+// Steppers
+//
+#undef X_STEP_PIN
+#undef X_DIR_PIN
+#undef X_ENABLE_PIN
+#define X_STEP_PIN                            54
+#define X_DIR_PIN                             55
+#define X_ENABLE_PIN                          38
+
+#undef Y_STEP_PIN
+#undef Y_DIR_PIN
+#undef Y_ENABLE_PIN
+#define Y_STEP_PIN                            60
+#define Y_DIR_PIN                             61
+#define Y_ENABLE_PIN                          56
+
+#undef Z_ENABLE_PIN
+#define Z_ENABLE_PIN                          63
+
+#undef E0_STEP_PIN
+#undef E0_DIR_PIN
+#undef E0_ENABLE_PIN
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         24
+
+//
+// Heaters / Fans
+//
+#undef HEATER_BED_PIN
+
+//
+// Misc. Functions
+//
+#undef SDSS
+#define SDSS                                  25  // 53
+
+//
+// LCD / Controller
+//
+#if IS_ULTRA_LCD && IS_NEWPANEL
+  #undef BEEPER_PIN
+
+  #undef LCD_PINS_RS
+  #undef LCD_PINS_ENABLE
+  #undef LCD_PINS_D4
+  #undef LCD_PINS_D5
+  #undef LCD_PINS_D6
+  #undef LCD_PINS_D7
+  #define LCD_PINS_RS                         27
+  #define LCD_PINS_ENABLE                     29
+  #define LCD_PINS_D4                         37
+  #define LCD_PINS_D5                         35
+  #define LCD_PINS_D6                         33
+  #define LCD_PINS_D7                         31
+
+  // Buttons
+  #undef BTN_EN1
+  #undef BTN_EN2
+  #undef BTN_ENC
+  #define BTN_EN1                             17
+  #define BTN_EN2                             16
+  #define BTN_ENC                             23
+
+#else
+
+  #define BEEPER_PIN                          33
+
+#endif