diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_MKS_BASE_14.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_MKS_BASE_14.h | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_14.h b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h new file mode 100644 index 0000000..3612f9b --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h @@ -0,0 +1,170 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS BASE 1.4" +#define MKS_BASE_VERSION 14 + +// +// Heaters / Fans +// +#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9 + +// Other Mods + +#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12 +#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM +#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup! +#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX + +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 50 +#endif +#ifndef RGB_LED_R_PIN + #define RGB_LED_G_PIN 51 +#endif +#ifndef RGB_LED_R_PIN + #define RGB_LED_B_PIN 52 +#endif + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11 +#endif + +#include "pins_MKS_BASE_common.h" + +/* + Available connectors on MKS BASE v1.4 + + ======= + | GND | + |-----| E0 + | 10 | (10) PB4 ** Pin23 ** PWM10 + |-----| + | GND | + |-----| E1 + | 7 | ( 7) PH4 ** Pin16 ** PWM7 + |-----| + | GND | + |-----| FAN + | 9 | ( 9) PH6 ** Pin18 ** PWM9 + ======= + + ======= + | GND | + |-----| Heated Bed + | 8 | ( 8) PH5 ** Pin17 ** PWM8 + ======= + + ========== + | 12-24V | + |--------| Power + | GND | + ========== + + XS3 Connector + ================= + | 65 | GND | 5V | (65) PK3 ** Pin86 ** A11 + |----|-----|----| + | 66 | GND | 5V | (66) PK4 ** Pin85 ** A12 + ================= + + Servos Connector + ================= + | 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11 + |----|-----|----| + | 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12 + ================= + + ICSP + ================= + | 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI + |----|----|-----| + | 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO + ================= (52) PB1 ** Pin20 ** SPI_SCK + + XS6/AUX-1 Connector + ====================== + | 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA + |----|-----|----|----| + | 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO + ====================== (51) PB2 ** Pin21 ** SPI_MOSI + (52) PB1 ** Pin20 ** SPI_SCK + (21) PD0 ** Pin43 ** I2C_SCL + + Temperature + ================================== + | GND | 69 | GND | 68 | GND | 67 | + ================================== + (69) PK7 ** Pin82 ** A15 + (68) PK6 ** Pin83 ** A14 + (67) PK5 ** Pin84 ** A13 + + Limit Switches + ============ + | 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2 + |----|-----| + | 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3 + |----|-----| + | 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX + |----|-----| + | 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX + |----|-----| + | 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX + |----|-----| + | 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX + ============ + + EXP1 + ============ + | 37 | 35 | (37) PC0 ** Pin53 ** D37 + |-----|----| (35) PC2 ** Pin55 ** D35 + | 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX + |-----|----| (16) PH1 ** Pin13 ** USART2_TX + | 23 | 25 | (23) PA1 ** Pin77 ** D23 + |-----|----| (25) PA3 ** Pin75 ** D25 + | 27 | 29 | (27) PA5 ** Pin73 ** D27 + |-----|----| (29) PA7 ** Pin71 ** D29 + | GND | 5V | + ============ + + EXP2 + ============ + | 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO + |-----|----| (52) PB1 ** Pin20 ** SPI_SCK + | 31 | 53 | (31) PC6 ** Pin59 ** D31 + |-----|----| (53) PB0 ** Pin19 ** SPI_SS + | 33 | 51 | (33) PC4 ** Pin57 ** D33 + |-----|----| (51) PB2 ** Pin21 ** SPI_MOSI + | 49 | 41 | (49) PL0 ** Pin35 ** D49 + |-----|----| (41) PG0 ** Pin51 ** D41 + | GND | NC | + ============ +*/ |