diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_RAMPS_S_12.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_RAMPS_S_12.h | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_RAMPS_S_12.h b/Marlin/src/pins/ramps/pins_RAMPS_S_12.h new file mode 100644 index 0000000..1bcf310 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS_S_12.h @@ -0,0 +1,280 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS-S v1.2 by Sakul.cz pin assignments + * Written by Michal Rábek <rabek33@gmail.com> + * + * Applies to the following boards: + * + * BOARD_RAMPS_S_12_EEFB Ramps S 1.2 (Hotend0, Hotend1, Fan, Bed) + * BOARD_RAMPS_S_12_EEEB Ramps S 1.2 (Hotend0, Hotend1, Hotend2, Bed) + * BOARD_RAMPS_S_12_EFFB Ramps S 1.2 (Hotend, Fan0, Fan1, Bed) + * + * Other pins_MYBOARD.h files may override these defaults + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +// Custom flags and defines for the build +//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS S 1.2" +#endif + +// +// Servos +// +#ifndef SERVO0_PIN + #define SERVO0_PIN 10 +#endif +#ifndef SERVO1_PIN + #define SERVO1_PIN 11 +#endif +#ifndef SERVO2_PIN + #define SERVO2_PIN 12 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN 44 +#endif + +// +// Limit Switches +// +#ifndef X_STOP_PIN + #ifndef X_MIN_PIN + #define X_MIN_PIN 37 + #endif + #ifndef X_MAX_PIN + #define X_MAX_PIN 36 + #endif +#endif +#ifndef Y_STOP_PIN + #ifndef Y_MIN_PIN + #define Y_MIN_PIN 35 + #endif + #ifndef Y_MAX_PIN + #define Y_MAX_PIN 34 + #endif +#endif +#ifndef Z_STOP_PIN + #ifndef Z_MIN_PIN + #define Z_MIN_PIN 33 + #endif + #ifndef Z_MAX_PIN + #define Z_MAX_PIN 32 + #endif +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 5 +#endif + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 44 // RAMPS_S S3 on the servos connector +#endif + +// +// Steppers +// +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 + +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 + +#ifndef Z_STEP_PIN + #define Z_STEP_PIN 57 +#endif +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 + +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 22 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 25 +#define E1_ENABLE_PIN 27 + +#define E2_STEP_PIN 29 +#define E2_DIR_PIN 28 +#define E2_ENABLE_PIN 39 + +// +// Temperature Sensors +// +#ifndef TEMP_0_PIN + #define TEMP_0_PIN 15 // Analog Input +#endif +#ifndef TEMP_1_PIN + #define TEMP_1_PIN 14 // Analog Input +#endif +#ifndef TEMP_2_PIN + #define TEMP_2_PIN 13 // Analog Input +#endif +#ifndef TEMP_3_PIN + #define TEMP_3_PIN 12 // Analog Input +#endif +#ifndef TEMP_BED_PIN + #define TEMP_BED_PIN 11 // Analog Input +#endif + +// +// Heaters / Fans +// +#ifndef MOSFET_D_PIN + #define MOSFET_D_PIN -1 +#endif +#ifndef RAMPS_S_HE_0 + #define RAMPS_S_HE_0 2 +#endif +#ifndef RAMPS_S_HE_1 + #define RAMPS_S_HE_1 3 +#endif +#ifndef RAMPS_S_HE_2 + #define RAMPS_S_HE_2 6 +#endif + +#define HEATER_BED_PIN 9 + +#define HEATER_0_PIN RAMPS_S_HE_0 + +#if MB(RAMPS_S_12_EEFB) // Hotend0, Hotend1, Fan, Bed + #define HEATER_1_PIN RAMPS_S_HE_1 + #define FAN_PIN RAMPS_S_HE_2 +#elif MB(RAMPS_S_12_EEEB) // Hotend0, Hotend1, Hotend2, Bed + #define HEATER_1_PIN RAMPS_S_HE_1 + #define HEATER_2_PIN RAMPS_S_HE_2 +#elif MB(RAMPS_S_12_EFFB) // Hotend, Fan0, Fan1, Bed + #define FAN_PIN RAMPS_S_HE_1 + #define FAN1_PIN RAMPS_S_HE_2 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +#ifndef KILL_PIN + #define KILL_PIN 46 +#endif + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 60 // Analog Input on EXTEND +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 // RAMPS_S S2 on the servos connector +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 12 // Hardware PWM (RAMPS_S S1 on the servos connector) + #elif HAS_FREE_AUX2_PINS + #define CASE_LIGHT_PIN 44 // Hardware PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 +#endif + +// +// TMC software SPI +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI 51 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO 50 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK 53 + #endif +#endif + +// +// Průša i3 MK2 Multiplexer Support +// +#ifndef E_MUX0_PIN + #define E_MUX0_PIN 29 // E2_STEP_PIN +#endif +#ifndef E_MUX1_PIN + #define E_MUX1_PIN 28 // E2_DIR_PIN +#endif +#ifndef E_MUX2_PIN + #define E_MUX2_PIN 39 // E2_ENABLE_PIN +#endif + +////////////////////////// +// LCDs and Controllers // +////////////////////////// + +// +// LCD Display output pins +// +#if HAS_WIRED_LCD + #define BEEPER_PIN 45 + #define LCD_PINS_RS 19 + #define LCD_PINS_ENABLE 49 + #define LCD_PINS_D4 18 + #define LCD_PINS_D5 30 + #define LCD_PINS_D6 41 + #define LCD_PINS_D7 31 + #ifndef SD_DETECT_PIN + #define SD_DETECT_PIN 38 + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif + +// +// LCD Display input pins +// +#if IS_NEWPANEL + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 43 +#endif |